#include "ckcsym.h" /* C K U U S X -- "User Interface" common functions. */ /* Author: Frank da Cruz , Columbia University Academic Information Systems, New York City. Copyright (C) 1985, 1996, Trustees of Columbia University in the City of New York. The C-Kermit software may not be, in whole or in part, licensed or sold for profit as a software product itself, nor may it be included in or distributed with commercial products or otherwise distributed by commercial concerns to their clients or customers without written permission of the Office of Kermit Development and Distribution, Columbia University. This copyright notice must not be removed, altered, or obscured. */ /* This module contains user interface functions needed by both the interactive user interface and the command-line-only user interface. */ /* Includes */ #include "ckcdeb.h" #include "ckcasc.h" #include "ckcker.h" #include "ckuusr.h" #ifdef OS2 #include #endif /* OS2 */ extern xx_strp xxstring; extern struct ck_p ptab[]; extern int protocol, xfrbel; #ifndef NETCONN /* We should just pull in ckcnet.h here, but it causes a conflict with curses.h. */ #ifdef TCPSOCKET #define NETCONN #else #ifdef SUNX25 #define NETCONN #else #ifdef STRATUSX25 #define NETCONN #else #ifdef DECNET #define NETCONN #else #ifdef NPIPE #define NETCONN #else #ifdef CK_NETBIOS #define NETCONN #ifdef SUPERLAT #define NETCONN #else #endif /* SUPERLAT */ #endif /* TCPSOCKET */ #endif /* SUNX25 */ #endif /* STRATUSX25 */ #endif /* DECNET */ #endif /* NPIPE */ #endif /* CK_NETBIOS */ #endif /* NETCONN */ #ifndef TCPSOCKET #ifdef MULTINET #define TCPSOCKET #endif /* MULTINET */ #ifdef DEC_TCPIP #define TCPSOCKET #endif /* DEC_TCPIP */ #ifdef WINTCP #define TCPSOCKET #endif /* WINTCP */ #ifdef TCPWARE #define TCPSOCKET #endif /* TCPWARE */ #endif /* TCPSOCKET */ #ifdef OS2 #ifdef NT #include #else /* NT */ #define INCL_VIO #include #endif /* NT */ #ifdef COMMENT /* Would you believe */ #undef COMMENT /* defines this ? */ #endif /* COMMENT */ #ifdef CK_NETBIOS #include "ckonbi.h" extern PNCB pRecvNCB, pSendNCB[MAXWS], pWorkNCB ; extern UCHAR NetBiosAdapter ; extern BOOL NetbeuiAPI ; #endif /* CK_NETBIOS */ #include "ckocon.h" extern ascreen commandscreen; #ifdef KUI #include "ikui.h" #endif /* KUI */ #endif /* OS2 */ #ifdef NT #include "cknwin.h" #endif /* NT */ #ifdef OS2 #include "ckowin.h" #endif /* OS2 */ #ifndef WINTCP #include #endif /* WINTCP */ #ifdef VMS #include #include #include #ifndef OLD_VMS #include /* Not for VAX C 2.3 */ #else #include #endif /* OLD_VMS */ #ifdef WINTCP #include #endif /* WINTCP */ #endif /* VMS */ /* Used internally */ _PROTOTYP( VOID screenc, (int, char, long, char *) ); #ifdef CK_CURSES #ifndef DYNAMIC static char xtrmbuf[1024]; /* tgetent() buffer */ char * trmbuf = xtrmbuf; #else char * trmbuf = NULL; #endif /* DYNAMIC */ _PROTOTYP( static VOID dpyinit, (void) ); _PROTOTYP( static long shocps, (int) ); _PROTOTYP( static long shoetl, (long, long, long, long) ); #endif /* CK_CURSES */ static int ft_win = 0; /* Fullscreen file transfer display window is active */ /* Variables declared here */ #ifdef OS2 /* File transfer display type */ int fdispla = XYFD_C; /* Curses (fullscreen) if we have it */ #else #ifdef CK_CURSES int fdispla = XYFD_C; #else int fdispla = XYFD_S; /* Otherwise CRT */ #endif /* CK_CURSES */ #endif /* OS2 */ int tt_crd = 0; /* Carriage return display */ #ifdef DEBUG char debfil[CKMAXPATH+1]; /* Debugging log file name */ #endif /* DEBUG */ #ifdef TLOG char trafil[CKMAXPATH+1]; /* Transaction log file name */ #endif /* TLOG */ char pktfil[CKMAXPATH+1]; /* Packet log file name */ char sesfil[CKMAXPATH+1]; /* Session log file name */ #ifdef DYNAMIC static char *cmdstr = NULL; /* Place to build generic command */ #else #ifdef pdp11 static char cmdstr[256]; #else static char cmdstr[4096]; #endif /* pdp11 */ #endif /* DYNAMIC */ char fspec[CKMAXPATH+1]; /* Filename string for \v(filespec) */ /* C C N T A B -- Names of ASCII control characters 0-31 */ char *ccntab[] = { "NUL", "SOH", "STX", "ETX", "EOT", "ENQ", "ACK", "BEL", "BS", "HT", "LF", "VT", "FF", "CR", "SO", "SI", "DLE", "DC1/XON", "DC2", "DC3/XOFF", "DC4", "NAK", "SYN", "ETB", "CAN", "EM", "SUB", "ESC", "FS", "GS", "RS", "US" }; int success = 1, /* Command success/failure flag */ #ifndef NOSPL cmdlvl = 0, /* Command level */ #endif /* NOSPL */ action, /* Action selected on command line */ sessft = 0, /* Session log file type, 0 = text */ pflag = 1, /* Print prompt */ msgflg = 1; /* Print informational messages */ #ifndef NOMSEND /* Multiple SEND */ char *msfiles[MSENDMAX]; #endif /* NOMSEND */ #ifdef CK_TIMERS extern long rttdelay; extern int rttflg; #endif /* CK_TIMERS */ extern int rcvtimo; #ifdef CK_RESEND extern int sendmode; extern long sendstart, rs_len; #endif /* CK_RESEND */ #ifdef CK_APC extern int apcactive; #endif /* CK_APC */ /* External variables */ #ifdef CK_PCT_BAR /* File transfer thermometer */ int thermometer = 1; /* ON by default */ #endif /* CK_PCT_BAR */ extern int local, quiet, binary, bctu, rptflg, ebqflg, network, server, what, spsiz, urpsiz, wmax, czseen, cxseen, winlo, displa, timint, parity, npad, ebq, ebqflg, bctr, rptq, atcapu, lpcapu, swcapu, wslotn, wslotr, rtimo, mypadn, sq, capas, rpsiz, tsecs, dfloc, tralog, pktlog, seslog, lscapu, dest, xitsta, escape, tlevel, bgset, backgrd, wslots, suspend, srvdis, nettype, spackets, spktl, rpktl, retrans, wcur, numerrs, fsecs, sendmode, whatru, crunched, timeouts, rpackets, fncnv, bye_active; #ifdef datageneral /* 2/12/92 ENH */ #include extern int con_reads_mt, conint_ch, conint_avl; #endif /* datageneral */ extern long speed, filcnt, ffc, tfc, rptn, fsize, sendstart, rs_len; long oldcps = 0L, cps = 0L; extern CHAR *rdatap, padch, seol, ctlq, mypadc, eol; extern char ttname[], *dftty, *cmarg, **cmlist, *versio, myhost[], whoareu[]; #ifdef TCPSOCKET extern char myipaddr[]; #endif /* TCPSOCKET */ #ifndef NOICP #ifdef DCMDBUF extern char *cmdbuf; /* Command buffer */ #else extern char cmdbuf[]; /* Command buffer */ #endif /* DCMDBUF */ extern int cmd_quoting; #endif /* NOICP */ #ifndef NOCCTRAP #ifdef NT #include #else /* NT */ #include #endif /* NT */ #include "ckcsig.h" extern ckjmpbuf cmjbuf; #endif /* NOCCTRAP */ #ifndef NOCSETS #include "ckcxla.h" extern int fcharset, tcharset; extern struct csinfo fcsinfo[], tcsinfo[]; #endif /* NOCSETS */ /* C K _ E R R S T R -- Return message from most recent system error */ char * ck_errstr() { #ifdef pdp11 _PROTOTYP( char * strerror, (int) ); return(strerror(errno)); #else /* pdp11 */ #ifdef ATTSV #ifdef BSD44 #ifdef __386BSD__ #ifndef NDSYSERRLIST extern char *sys_errlist[]; #endif /* NDSYSERRLIST */ #else #ifndef __bsdi__ #ifndef NDSYSERRLIST extern const char *const sys_errlist[]; #endif /* NDSYSERRLIST */ #endif /* __bsdi__ */ #endif /* __386BSD__ */ return((char *) sys_errlist[errno]); #else /* !BSD44 */ #ifndef NDSYSERRLIST extern char *sys_errlist[]; #endif /* NDSYSERRLIST */ return((char *) sys_errlist[errno]); #endif /* BSD44 */ #else /* !ATTSV */ #ifdef BSD4 #ifndef NDSYSERRLIST extern char *sys_errlist[]; #endif /* NDSYSERRLIST */ extern int errno; return((char *)sys_errlist[errno]); #else #ifdef OS2 #ifndef NDSYSERRLIST extern char *sys_errlist[]; #endif /* NDSYSERRLIST */ #ifdef NT extern int_sys_nerr; #endif /* NT */ char *e; e = (errno > -1 #ifdef NT && errno <= _sys_nerr #endif /* NT */ ) ? #ifdef NT (char *) sys_errlist[errno] #else /* NT */ /* I don't know how to get a CLIB error string in OS/2 */ strerror(errno) #endif /* NT */ : ""; return(e ? e : ""); #else /* OS2 */ return(""); #endif /* OS2 */ #endif /* BSD4 */ #endif /* ATTSV */ #endif /* pdp11 */ } #ifdef TCPSOCKET #ifdef NT extern int WSASafeToCancel; #endif /* NT */ #endif /* TCPSOCKET */ /* P A R N A M -- Return parity name */ char * #ifdef CK_ANSIC parnam(char c) #else parnam(c) char c; #endif /* CK_ANSIC */ /* parnam */ { switch (c) { case 'e': return("even"); case 'o': return("odd"); case 'm': return("mark"); case 's': return("space"); case 0: return("none"); default: return("invalid"); } } /* S H O M D M -- Show modem signals */ VOID shomdm() { /* Note use of "\r\n" to make sure this report prints right, even when called during CONNECT mode. */ int y; y = ttgmdm(); switch (y) { case -3: printf( "Modem signals unavailable in this version of Kermit\r\n"); break; case -2: printf("No modem control for this device\r\n"); break; case -1: printf("Modem signals unavailable\r\n"); break; default: #ifndef MAC printf( " Carrier Detect (CD): %s\r\n",(y & BM_DCD) ? "On": "Off"); printf( " Dataset Ready (DSR): %s\r\n",(y & BM_DSR) ? "On": "Off"); #endif /* MAC */ printf( " Clear To Send (CTS): %s\r\n",(y & BM_CTS) ? "On": "Off"); #ifndef STRATUS #ifndef MAC printf( " Ring Indicator (RI): %s\r\n",(y & BM_RNG) ? "On": "Off"); #endif /* MAC */ printf( " Data Terminal Ready (DTR): %s\r\n", #ifdef NT "(unknown)" #else /* NT */ (y & BM_DTR) ? "On": "Off" #endif /* NT */ ); #ifndef MAC printf( " Request To Send (RTS): %s\r\n", #ifdef NT "(unknown)" #else /* NT */ (y & BM_RTS) ? "On": "Off" #endif /* NT */ ); #endif /* MAC */ #endif /* STRATUS */ } } /* S D E B U -- Record spar results in debugging log */ VOID sdebu(len) int len; { debug(F111,"spar: data",(char *) rdatap,len); debug(F101," spsiz ","", spsiz); debug(F101," timint","",timint); debug(F101," npad ","", npad); debug(F101," padch ","", padch); debug(F101," seol ","", seol); debug(F101," ctlq ","", ctlq); debug(F101," ebq ","", ebq); debug(F101," ebqflg","",ebqflg); debug(F101," bctr ","", bctr); debug(F101," rptq ","", rptq); debug(F101," rptflg","",rptflg); debug(F101," lscapu","",lscapu); debug(F101," atcapu","",atcapu); debug(F101," lpcapu","",lpcapu); debug(F101," swcapu","",swcapu); debug(F101," wslotn","", wslotn); debug(F101," whatru","", whatru); } /* R D E B U -- Debugging display of rpar() values */ VOID rdebu(d,len) CHAR *d; int len; { debug(F111,"rpar: data",d,len); debug(F101," rpsiz ","", xunchar(d[0])); debug(F101," rtimo ","", rtimo); debug(F101," mypadn","",mypadn); debug(F101," mypadc","",mypadc); debug(F101," eol ","", eol); debug(F101," ctlq ","", ctlq); debug(F101," sq ","", sq); debug(F101," ebq ","", ebq); debug(F101," ebqflg","",ebqflg); debug(F101," bctr ","", bctr); debug(F101," rptq ","", d[8]); debug(F101," rptflg","",rptflg); debug(F101," capas ","", capas); debug(F101," bits ","",d[capas]); debug(F101," lscapu","",lscapu); debug(F101," atcapu","",atcapu); debug(F101," lpcapu","",lpcapu); debug(F101," swcapu","",swcapu); debug(F101," wslotr","", wslotr); debug(F101," rpsiz(extended)","",rpsiz); } #ifdef COMMENT /* C H K E R R -- Decide whether to exit upon a protocol error */ VOID chkerr() { if (backgrd && !server) fatal("Protocol error"); } #endif /* COMMENT */ /* F A T A L -- Fatal error message */ VOID fatal(msg) char *msg; { if (!msg) msg = ""; #ifdef VMS if (strncmp(msg,"%CKERMIT",8)) conol("%CKERMIT-E-FATAL, "); conoll(msg); #else /* !VMS */ screen(SCR_EM,0,0L,msg); #endif /* VMS */ debug(F110,"fatal",msg,0); tlog(F110,"Fatal:",msg,0L); #ifdef OS2 if (xfrbel) bleep(BP_FAIL); sleep(1); if (xfrbel) bleep(BP_FAIL); #endif /* OS2 */ doexit(BAD_EXIT,xitsta | 1); /* Exit indicating failure */ } /* B L D L E N -- Make length-encoded copy of string */ char * bldlen(str,dest) char *str, *dest; { int len; len = (int)strlen(str); if (len > 94) *dest = SP; else *dest = (char) tochar(len); strcpy(dest+1,str); return(dest+len+1); } /* S E T G E N -- Construct a generic command */ /* Call with Generic command character followed by three string arguments. Trailing strings are allowed to be empty (""). Each string except the last non-empty string must be less than 95 characters long. The final nonempty string is allowed to be longer. */ CHAR #ifdef CK_ANSIC setgen(char type, char * arg1, char * arg2, char * arg3) #else setgen(type,arg1,arg2,arg3) char type, *arg1, *arg2, *arg3; #endif /* CK_ANSIC */ /* setgen */ { char *upstr, *cp; #ifdef DYNAMIC if (!cmdstr) if (!(cmdstr = malloc(MAXSP + 1))) fatal("setgen: can't allocate memory"); #endif /* DYNAMIC */ cp = cmdstr; *cp++ = type; *cp = NUL; if (!arg1) arg1 = ""; if (!arg2) arg2 = ""; if (!arg3) arg3 = ""; if (*arg1 != NUL) { upstr = bldlen(arg1,cp); if (*arg2 != NUL) { upstr = bldlen(arg2,upstr); if (*arg3 != NUL) bldlen(arg3,upstr); } } cmarg = cmdstr; debug(F110,"setgen",cmarg,0); return('g'); } #ifndef NOMSEND static char *mgbufp = NULL; /* F N P A R S E -- */ /* Argument is a character string containing one or more filespecs. This function breaks the string apart into an array of pointers, one to each filespec, and returns the number of filespecs. Used by server when it receives a GET command to allow it to process multiple file specifications in one transaction. Sets cmlist to point to a list of file pointers, exactly as if they were command line arguments. This version of fnparse treats spaces as filename separators. If your operating system allows spaces in filenames, you'll need a different separator. This version of fnparse mallocs a string buffer to contain the names. It cannot assume that the string that is pointed to by the argument is safe. */ int fnparse(string) char *string; { char *p, *s, *q; int r = 0, x; /* Return code */ if (mgbufp) free(mgbufp); /* Free this from last time. */ mgbufp = malloc((int)strlen(string)+2); if (!mgbufp) { debug(F100,"fnparse malloc error","",0); return(0); } #ifndef NOICP #ifndef NOSPL strncpy(fspec,string,CKMAXPATH); /* Make copy for \v(filespec) */ #endif /* NOSPL */ #endif /* NOICP */ s = string; /* Input string */ p = q = mgbufp; /* Point to the copy */ r = 0; /* Initialize our return code */ while (*s == SP || *s == HT) /* Skip leading spaces and tabs */ s++; for (x = strlen(s); /* Strip trailing spaces */ (x > 1) && (s[x-1] == SP || s[x-1] == HT); x--) s[x-1] = NUL; while (1) { /* Loop through rest of string */ if (*s == CMDQ) { /* Backslash (quote character)? */ if ((x = xxesc(&s)) > -1) { /* Go interpret it. */ *q++ = (char) x; /* Numeric backslash code, ok */ } else { /* Just let it quote next char */ s++; /* get past the backslash */ *q++ = *s++; /* deposit next char */ } continue; } else if (*s == SP || *s == NUL) { /* Unquoted space or NUL? */ *q++ = NUL; /* End of output filename. */ msfiles[r] = p; /* Add this filename to the list */ debug(F111,"fnparse",msfiles[r],r); r++; /* Count it */ if (*s == NUL) break; /* End of string? */ while (*s == SP) s++; /* Skip repeated spaces */ p = q; /* Start of next name */ continue; } else *q++ = *s; /* Otherwise copy the character */ s++; /* Next input character */ } debug(F101,"fnparse r","",r); msfiles[r] = ""; /* Put empty string at end of list */ cmlist = msfiles; return(r); } #endif /* NOMSEND */ char * /* dbchr() for DEBUG SESSION */ dbchr(c) int c; { static char s[8]; char *cp = s; c &= 0xff; if (c & 0x80) { /* 8th bit on */ *cp++ = '~'; c &= 0x7f; } if (c < SP) { /* Control character */ *cp++ = '^'; *cp++ = (char) ctl(c); } else if (c == DEL) { *cp++ = '^'; *cp++ = '?'; } else { /* Printing character */ *cp++ = (char) c; } *cp = '\0'; /* Terminate string */ cp = s; /* Return pointer to it */ return(cp); } /* C K H O S T -- Get name of local host (where C-Kermit is running) */ /* Call with pointer to buffer to put hostname in, and length of buffer. Copies hostname into buffer on success, puts null string in buffer on failure. */ #ifdef BSD44 #define BSD4 #undef ATTSV #endif /* BSD44 */ #ifdef SVORPOSIX #ifndef BSD44 #ifndef apollo #include #endif /* apollo */ #endif /* BSD44 */ #else #ifdef BELLV10 #include #endif /* BELLV10 */ #endif /* SVORPOSIX*/ VOID ckhost(vvbuf,vvlen) char * vvbuf; int vvlen; { #ifndef NOPUSH extern int nopush; #ifndef NOSERVER extern int en_hos; #endif /* NOSERVER */ #endif /* NOPUSH */ #ifdef pdp11 *vvbuf = NUL; #else /* Everything else - rest of this routine */ char *g; #ifdef VMS int x; #endif /* VMS */ #ifdef SVORPOSIX #ifndef BSD44 #ifndef _386BSD struct utsname hname; #endif /* _386BSD */ #endif /* BSD44 */ #endif /* SVORPOSIX */ #ifdef datageneral int ac0 = (char *) vvbuf, ac1 = -1, ac2 = 0; #endif /* datageneral */ #ifndef NOPUSH if (getenv("CK_NOPUSH")) { /* No shell access allowed */ nopush = 1; /* on this host... */ #ifndef NOSERVER en_hos = 0; #endif /* NOSERVER */ } #endif /* NOPUSH */ *vvbuf = NUL; /* How let's get our host name ... */ #ifndef BELLV10 /* Does not have gethostname() */ #ifndef OXOS #ifdef SVORPOSIX #ifdef BSD44 if (gethostname(vvbuf,vvlen) < 0) *vvbuf = NUL; #else #ifdef _386BSD if (gethostname(vvbuf,vvlen) < 0) *vvbuf = NUL; #else #ifdef QNX #ifdef TCPSOCKET if (gethostname(vvbuf,vvlen) < 0) *vvbuf = NUL; #else if (uname(&hname) > -1) strncpy(vvbuf,hname.nodename,vvlen); #endif /* TCPSOCKET */ #else /* SVORPOSIX but not _386BSD or BSD44 */ if (uname(&hname) > -1) strncpy(vvbuf,hname.nodename,vvlen); #endif /* QNX */ #endif /* _386BSD */ #endif /* BSD44 */ #else /* !SVORPOSIX */ #ifdef BSD4 if (gethostname(vvbuf,vvlen) < 0) *vvbuf = NUL; #else /* !BSD4 */ #ifdef VMS g = getenv("SYS$NODE"); if (g) strncpy(vvbuf,g,vvlen); x = (int)strlen(vvbuf); if (x > 1 && vvbuf[x-1] == ':' && vvbuf[x-2] == ':') vvbuf[x-2] = NUL; #else #ifdef datageneral if (sys($HNAME,&ac0,&ac1,&ac2) == 0) /* successful */ vvlen = ac2 + 1; /* enh - have to add one */ #else #ifdef OS2 /* OS/2 */ g = getenv("HOSTNAME"); /* (Created by TCP/IP install) */ if (!g) g = getenv("SYSTEMNAME"); /* (Created by PATHWORKS install?) */ if (g) strncpy(vvbuf,g,vvlen); #else /* OS2 */ #ifdef OSK #ifdef TCPSOCKET if (gethostname(vvbuf, vvlen) < 0) *vvbuf = NUL; #endif /* TCPSOCKET */ #endif /* OSK */ #endif /* OS2 */ #endif /* datageneral */ #endif /* VMS */ #endif /* BSD4 */ #endif /* SVORPOSIX */ #else /* OXOS */ /* If TCP/IP is not installed, gethostname() fails, use uname() */ if (gethostname(vvbuf,vvlen) < 0) { if (uname(&hname) > -1) strncpy(vvbuf,hname.nodename,vvlen); else *vvbuf = NUL; } #endif /* OXOS */ #endif /* BELLV10 */ if (*vvbuf == NUL) { /* If it's still empty */ g = getenv("HOST"); /* try this */ if (g) strncpy(vvbuf,g,vvlen); } vvbuf[vvlen-1] = NUL; /* Make sure result is terminated. */ #endif /* pdp11 */ } #ifdef BSD44 #undef BSD4 #define ATTSV #endif /* BSD44 */ /* A S K M O R E -- Poor person's "more". Returns 0 if no more, 1 if more wanted. */ int xaskmore = 1; int askmore() { char c; int rv; if (!xaskmore) return(1); rv = -1; while (rv < 0) { #ifndef OS2 printf("more? "); #ifdef UNIX #ifdef NOSETBUF fflush(stdout); #endif /* NOSETBUF */ #endif /* UNIX */ #else printf("more? (Y or space-bar for yes, N for no) "); fflush(stdout); #endif /* OS2 */ c = (char) coninc(0); switch (c) { /* Yes */ case SP: case 'y': case 'Y': case 012: case 015: #ifdef OSK write(1, "\015 \015", sizeof "\015 \015" - 1); #else printf("\015 \015"); #endif /* OSK */ rv = 1; break; /* No */ case 'n': case 'N': case 'q': case 'Q': #ifdef OSK printf("\n"); #else printf("\015\012"); #endif /* OSK */ rv = 0; break; /* Invalid answer */ default: printf("Y or space-bar for yes, N for no\n"); continue; } #ifdef OS2 printf("\r \r"); fflush(stdout); #endif /* OS2 */ } return(rv); } /* T R A P -- Terminal interrupt handler */ SIGTYP #ifdef CK_ANSIC trap(int sig) #else trap(sig) int sig; #endif /* CK_ANSIC */ /* trap */ { extern int b_save, f_save; #ifdef OS2 extern int cursor_ena[], cursor_save; extern BYTE vmode; #endif /* OS2 */ #ifndef NOSPL extern int i_active, instatus; #endif /* NOSPL */ #ifdef NTSIG connoi(); #endif /* NTSIG */ #ifdef VMS int i; FILE *f; #endif /* VMS */ #ifdef __EMX__ signal(SIGINT, SIG_ACK); #endif #ifdef GEMDOS /* GEM is not reentrant, no i/o from interrupt level */ cklongjmp(cmjbuf,1); /* Jump back to parser now! */ #endif /* GEMDOS */ debug(F101,"^C trap() caught signal","",sig); #ifndef NOSPL if (i_active) { /* INPUT command was active? */ i_active = 0; /* Not any more... */ instatus = INP_UI; /* INPUT status = User Interrupted */ } #endif /* NOSPL */ binary = b_save; /* Restore these */ fncnv = f_save; bye_active = 0; zclose(ZIFILE); /* If we were transferring a file, */ zclose(ZOFILE); /* close it. */ #ifndef NOICP cmdsquo(cmd_quoting); /* If command quoting was turned off */ #endif /* NOICP */ #ifdef CK_APC apcactive = APC_INACTIVE; #endif /* CK_APC */ #ifdef VMS /* Fix terminal. */ if (ft_win) { /* If curses window open */ debug(F100,"^C trap() curses","",0); screen(SCR_CW,0,0L,""); /* Close it */ conres(); /* Restore terminal */ i = printf("^C..."); /* Echo ^C to standard output */ } else { conres(); i = printf("^C...\n"); /* Echo ^C to standard output */ } if (i < 1 && ferror(stdout)) { /* If there was an error */ debug(F100,"^C trap() error","",0); fclose(stdout); /* close standard output */ f = fopen(dftty, "w"); /* open the controlling terminal */ if (f) stdout = f; /* and make it standard output */ printf("^C...\n"); /* and echo the ^C again. */ } #else /* Not VMS */ #ifdef STRATUS conres(); /* Set console back to normal mode */ #endif /* STRATUS */ if (ft_win) { /* If curses window open, */ debug(F100,"^C trap() curses","",0); screen(SCR_CW,0,0L,""); /* close it. */ printf("^C..."); /* Echo ^C to standard output */ } else { printf("^C...\n"); } #endif /* VMS */ #ifdef datageneral connoi_mt(); /* Kill asynch task that listens to */ ttimoff(); conres(); /* the keyboard */ #endif /* datageneral */ #ifndef NOCCTRAP /* This is stupid -- every version should have ttimoff()... */ #ifdef UNIX ttimoff(); /* Turn off any timer interrupts */ #else #ifdef OSK ttimoff(); /* Turn off any timer interrupts */ #else #ifdef STRATUS ttimoff(); /* Turn off any timer interrupts */ #else #ifdef OS2 #ifdef TCPSOCKET #ifdef NT /* WSAIsBlocking() returns FALSE in Win95 during a blocking accept call */ if ( WSASafeToCancel /* && WSAIsBlocking() */ ) { WSACancelBlockingCall(); } #endif /* NT */ #endif /* TCPSOCKET */ #ifdef CK_NETBIOS if (netbiosAvail) { int i; NCB CancelNCB; /* Cancel all outstanding Netbios Send or Work requests */ for ( i = 0 ; i < MAXWS ; i++) { if (pSendNCB[i]->basic_ncb.bncb.ncb_retcode == NB_COMMAND_IN_PROCESS ) { NCBCancel( NetbeuiAPI, &CancelNCB, NetBiosAdapter, pSendNCB[i] ) ; Dos16SemWait( pSendNCB[i]->basic_ncb.ncb_semaphore, SEM_INDEFINITE_WAIT); } } if ( pWorkNCB->basic_ncb.bncb.ncb_retcode == NB_COMMAND_IN_PROCESS ) { NCBCancel( NetbeuiAPI, &CancelNCB, NetBiosAdapter, pWorkNCB ) ; Dos16SemWait( pWorkNCB->basic_ncb.ncb_semaphore, SEM_INDEFINITE_WAIT ) ; } } #endif /* CK_NETBIOS */ ttimoff(); /* Turn off any timer interrupts */ #else #ifdef VMS ttimoff(); /* Turn off any timer interrupts */ #endif /* VMS */ #endif /* OS2 */ #endif /* STRATUS */ #endif /* OSK */ #endif /* UNIX */ #ifdef OSK sigmask(-1); /* We are in an intercept routine but do not perform a F$RTE (done implicitly but rts). We have to decrement the sigmask as F$RTE does. Warning: longjump only restores the cpu registers, NOT the fpu registers. So don't use fpu at all or at least don't use common fpu (double or float) register variables. */ #endif /* OSK */ #ifdef NTSIG PostCtrlCSem(); #else /* NTSIG */ #ifdef NT cklongjmp(ckjaddr(cmjbuf),1); #else /* NT */ cklongjmp(cmjbuf,1); #endif /* NT */ #endif /* NTSIG */ #else /* NOCCTRAP */ /* No Ctrl-C trap, just exit. */ #ifdef CK_CURSES /* Curses support? */ screen(SCR_CW,0,0L,""); /* Close curses window */ #endif /* CK_CURSES */ doexit(BAD_EXIT,what); /* Exit poorly */ #endif /* NOCCTRAP */ SIGRETURN; } /* C K _ T I M E -- Returns pointer to current time. */ char * ck_time() { static char tbuf[10]; char *p; int x; ztime(&p); /* "Thu Feb 8 12:00:00 1990" */ if (!p) /* like asctime()! */ return(""); if (*p) { for (x = 11; x < 19; x++) /* copy hh:mm:ss */ tbuf[x - 11] = p[x]; /* to tbuf */ tbuf[8] = NUL; /* terminate */ } return(tbuf); /* and return it */ } /* C C _ C L E A N -- Cleanup after terminal interrupt handler */ #ifdef GEMDOS int cc_clean() { zclose(ZIFILE); /* If we were transferring a file, */ zclose(ZOFILE); /* close it. */ printf("^C...\n"); /* Not VMS, no problem... */ } #endif /* GEMDOS */ /* S T P T R A P -- Handle SIGTSTP (suspend) signals */ SIGTYP #ifdef CK_ANSIC stptrap(int sig) #else stptrap(sig) int sig; #endif /* CK_ANSIC */ /* stptrap */ { #ifndef NOJC int x; extern int cmflgs; debug(F101,"stptrap() caught signal","",sig); if (!suspend) { printf("\r\nsuspend disabled\r\n"); #ifndef NOICP if (what == W_COMMAND) { /* If we were parsing commands */ prompt(xxstring); /* reissue the prompt and partial */ if (!cmflgs) /* command (if any) */ printf("%s",cmdbuf); } #endif /* NOICP */ } else { conres(); /* Reset the console */ #ifndef OS2 /* Flush pending output first, in case we are continued */ /* in the background, which could make us block */ fflush(stdout); x = psuspend(suspend); /* Try to suspend. */ if (x < 0) #endif /* OS2 */ printf("Job control not supported\r\n"); conint(trap,stptrap); /* Rearm the trap. */ debug(F100,"stptrap back from suspend","",0); switch (what) { case W_CONNECT: /* If suspended during CONNECT? */ conbin((char)escape); /* put console back in binary mode */ debug(F100,"stptrap W_CONNECT","",0); break; #ifndef NOICP case W_COMMAND: /* Suspended in command mode */ debug(F101,"stptrap W_COMMAND pflag","",pflag); concb((char)escape); /* Put back CBREAK tty mode */ if (pflag) { /* If command parsing was */ prompt(xxstring); /* reissue the prompt and partial */ if (!cmflgs) /* command (if any) */ printf("%s",cmdbuf); } break; #endif /* NOICP */ default: /* All other cases... */ debug(F100,"stptrap default","",0); concb((char)escape); /* Put it back in CBREAK mode */ break; } } #endif /* NOJC */ SIGRETURN; } #ifdef TLOG #define TBUFL 300 /* T L O G -- Log a record in the transaction file */ /* Call with a format and 3 arguments: two strings and a number: f - Format, a bit string in range 0-7, bit x is on, arg #x is printed. s1,s2 - String arguments 1 and 2. n - Int, argument 3. */ VOID #ifdef CK_ANSIC tlog(int f, char *s1, char *s2, long n) #else tlog(f,s1,s2,n) int f; long n; char *s1, *s2; #endif /* CK_ANSIC */ /* tlog */ { static char s[TBUFL]; char *sp = s; int x; if (!tralog) return; /* If no transaction log, don't */ switch (f) { case F000: /* 0 (special) "s1 n s2" */ if ((int)strlen(s1) + (int)strlen(s2) + 15 > TBUFL) sprintf(sp,"?T-Log string too long"); else sprintf(sp,"%s %ld %s",s1,n,s2); if (zsoutl(ZTFILE,s) < 0) tralog = 0; break; case F001: /* 1, " n" */ sprintf(sp," %ld",n); if (zsoutl(ZTFILE,s) < 0) tralog = 0; break; case F010: /* 2, "[s2]" */ x = (int)strlen(s2); if (s2[x] == '\n') s2[x] = '\0'; if (x + 6 > TBUFL) sprintf(sp,"?String too long"); else sprintf(sp,"[%s]",s2); if (zsoutl(ZTFILE,"") < 0) tralog = 0; break; case F011: /* 3, "[s2] n" */ x = (int)strlen(s2); if (s2[x] == '\n') s2[x] = '\0'; if (x + 6 > TBUFL) sprintf(sp,"?String too long"); else sprintf(sp,"[%s] %ld",s2,n); if (zsoutl(ZTFILE,s) < 0) tralog = 0; break; case F100: /* 4, "s1" */ if (zsoutl(ZTFILE,s1) < 0) tralog = 0; break; case F101: /* 5, "s1: n" */ if ((int)strlen(s1) + 15 > TBUFL) sprintf(sp,"?String too long"); else sprintf(sp,"%s: %ld",s1,n); if (zsoutl(ZTFILE,s) < 0) tralog = 0; break; case F110: /* 6, "s1 s2" */ x = (int)strlen(s2); if (s2[x] == '\n') s2[x] = '\0'; if ((int)strlen(s1) + x + 4 > TBUFL) sprintf(sp,"?String too long"); else sprintf(sp,"%s %s",s1,s2); if (zsoutl(ZTFILE,s) < 0) tralog = 0; break; case F111: /* 7, "s1 s2: n" */ x = (int)strlen(s2); if (s2[x] == '\n') s2[x] = '\0'; if ((int)strlen(s1) + x + 15 > TBUFL) sprintf(sp,"?String too long"); else sprintf(sp,"%s %s: %ld",s1,s2,n); if (zsoutl(ZTFILE,s) < 0) tralog = 0; break; default: sprintf(sp,"?Invalid format for tlog() - %ld",n); if (zsoutl(ZTFILE,s) < 0) tralog = 0; } } #endif /* TLOG */ #ifndef MAC /* The rest of this file is for all implementations but the Macintosh. */ /* C H K I N T -- Check for console interrupts */ #ifdef CK_CURSES static int repaint = 0; /* Transfer display needs repainting */ #endif /* CK_CURSES */ int chkint() { int ch, cn, ofd; long zz; if ((!local) || (quiet)) return(0); /* Only do this if local & not quiet */ #ifdef datageneral if (con_reads_mt) /* if conint_mt task is active */ if (conint_avl) { /* and there's an interrupt pending */ cn = 1; /* process it */ ch = conint_ch; conint_avl = 0; /* turn off flag so conint_mt can */ } else /* proceed */ return(0); else /* if conint_mt not active */ if ((ch = coninc(2)) < 0) /* try to get char manually */ return(0); /* I/O error, or no data */ else /* if successful, set cn so we */ cn = 1; /* know we got one */ debug(F101,"chkint got keyboard character",ch,cn); #else /* !datageneral */ #ifdef NTSIG { extern int TlsIndex; struct _threadinfo * threadinfo; threadinfo = (struct _threadinfo *) TlsGetValue(TlsIndex); if (threadinfo) { if (!WaitSem(threadinfo->DieSem,0)) return -1; /* Cancel Immediately */ } } #endif /* NTSIG */ cn = conchk(); /* Any input waiting? */ debug(F101,"conchk","",cn); if (cn < 1) return(0); ch = coninc(5) ; debug(F101,"coninc","",ch); if (ch < 0) return(0); #endif /* datageneral */ switch (ch & 0177) { case 'A': case 'a': case 0001: /* Status report */ case 'S': case 's': if (fdispla != XYFD_R && fdispla != XYFD_S && fdispla != XYFD_N) return(0); /* Only for serial, simple or none */ ofd = fdispla; /* [MF] Save file display type */ if (fdispla == XYFD_N) fdispla = XYFD_R; /* [MF] Pretend serial if no display */ screen(SCR_TN,0,0l,"Status report:"); screen(SCR_TN,0,0l," file type: "); if (binary) { switch(binary) { case XYFT_L: screen(SCR_TZ,0,0l,"labeled"); break; case XYFT_I: screen(SCR_TZ,0,0l,"image"); break; case XYFT_U: screen(SCR_TZ,0,0l,"binary undefined"); break; default: case XYFT_B: screen(SCR_TZ,0,0l,"binary"); break; } } else { #ifdef NOCSETS screen(SCR_TZ,0,0l,"text"); #else screen(SCR_TU,0,0l,"text, "); if (tcharset == TC_TRANSP) { screen(SCR_TZ,0,0l,"transparent"); } else { if (what == W_SEND) { screen(SCR_TZ,0,0l,tcsinfo[tcharset].keyword); screen(SCR_TU,0,0l," => "); screen(SCR_TZ,0,0l,fcsinfo[fcharset].keyword); } else { screen(SCR_TZ,0,0l,fcsinfo[fcharset].keyword); screen(SCR_TU,0,0l," => "); screen(SCR_TZ,0,0l,tcsinfo[tcharset].keyword); } } #endif /* NOCSETS */ } screen(SCR_QE,0,filcnt," file number"); if (fsize) screen(SCR_QE,0,fsize," size"); screen(SCR_QE,0,ffc," characters so far"); if (fsize > 0L) { #ifdef CK_RESEND zz = what == W_SEND ? sendstart : what == W_RECV ? rs_len : 0; zz = ( (ffc + zz) * 100L ) / fsize; #else zz = ( ffc * 100L ) / fsize; #endif /* CK_RESEND */ screen(SCR_QE,0,zz, " percent done"); } if (bctu == 4) { /* Block check */ screen(SCR_TU,0,0L," block check: "); screen(SCR_TZ,0,0L,"blank-free-2"); } else screen(SCR_QE,0,(long)bctu, " block check"); screen(SCR_QE,0,(long)rptflg," compression"); screen(SCR_QE,0,(long)ebqflg," 8th-bit prefixing"); screen(SCR_QE,0,(long)lscapu," locking shifts"); if (!network) screen(SCR_QE,0, speed, " speed"); if (what == W_SEND) screen(SCR_QE,0,(long)spsiz, " packet length"); else if (what == W_RECV || what == W_REMO) screen(SCR_QE,0,(long)urpsiz," packet length"); screen(SCR_QE,0,(long)wslots, " window slots"); fdispla = ofd; /* [MF] Restore file display type */ return(0); case 'B': case 'b': case 0002: /* Cancel batch */ case 'Z': case 'z': case 0032: screen(SCR_ST,ST_MSG,0l, (what == W_RECV && wslots > 1) ? "Canceling batch, wait... " : "Canceling batch... " ); czseen = 1; return(0); case 'F': case 'f': case 0006: /* Cancel file */ case 'X': case 'x': case 0030: screen(SCR_ST,ST_MSG,0l, (what == W_RECV && wslots > 1) ? "Canceling file, wait... " : "Canceling file... " ); cxseen = 1; return(0); case 'R': case 'r': case 0022: /* Resend packet */ case 0015: case 0012: screen(SCR_ST,ST_MSG,0l,"Resending packet... "); numerrs++; resend(winlo); return(0); #ifdef datageneral case '\03': /* We're not trapping ^C's with */ trap(0); /* signals, so we check here */ #endif /* datageneral */ case 'C': case 'c': /* Ctrl-C */ #ifndef datageneral case '\03': #endif /* datageneral */ case 'E': case 'e': /* Send error packet */ case 0005: return(-1); #ifdef CK_CURSES case 0014: /* Ctrl-L to refresh screen */ case 'L': case 'l': /* Also accept L (upper, lower) */ case 0027: /* Ctrl-W synonym for VMS & Ingres */ repaint = 1; return(0); #endif /* CK_CURSES */ default: /* Anything else, print message */ intmsg(1L); return(0); } } /* I N T M S G -- Issue message about terminal interrupts */ VOID #ifdef CK_ANSIC intmsg(long n) #else intmsg(n) long n; #endif /* CK_ANSIC */ /* intmsg */ { #ifdef CK_NEED_SIG char buf[80]; #endif /* CK_NEED_SIG */ if (!displa || quiet) /* Not if we're being quiet */ return; if (server && (!srvdis || n > -1L)) /* Special for server */ return; #ifdef CK_NEED_SIG buf[0] = NUL; /* Keep compilers happy */ #endif /* CK_NEED_SIG */ #ifndef OXOS #ifdef SVORPOSIX conchk(); /* Clear out pending escape-signals */ #endif /* SVORPOSIX */ #endif /* ! OXOS */ #ifdef VMS conres(); /* So Ctrl-C will work */ #endif /* VMS */ if ((!server && n == 1L) || (server && n < 0L)) { #ifdef CK_NEED_SIG sprintf(buf,"Type escape character (%s) followed by:",dbchr(escape)); screen(SCR_TN,0,0l,buf); #endif /* CK_NEED_SIG */ if ( protocol == PROTO_K ) { screen(SCR_TN,0,0l,"X to cancel file, CR to resend current packet"); screen(SCR_TN,0,0l,"Z to cancel group, A for status report"); screen(SCR_TN,0,0l,"E to send Error packet, Ctrl-C to quit immediately: "); } else { screen(SCR_TN,0,0l,"Ctrl-C to cancel file transfer: "); } /* if (server) */ screen(SCR_TN,0,0l,""); } else screen(SCR_TU,0,0l," "); } static int newdpy = 0; /* New display flag */ static char fbuf[80]; /* Filename buffer */ static char abuf[80]; /* As-name buffer */ static long oldffc = 0L; static long dots = 0L; static int hpos = 0; static VOID /* Initialize Serial or CTR display */ dpyinit() { newdpy = 0; /* Don't do this again */ oldffc = 0L; /* Reset this */ dots = 0L; /* and this.. */ oldcps = cps = 0L ; conoll(""); /* New line */ if (what == W_SEND) conol("Sending: "); /* Action */ else if (what == W_RECV) conol("Receiving: "); conol(fbuf); if (*abuf) conol(" => "); conoll(abuf); /* Names */ *fbuf = NUL; *abuf = NUL; if (fsize > -1L) { /* Size */ sprintf(fbuf,"Size: %ld, Type: ",fsize); conol(fbuf); *fbuf = NUL; } else conol("Size: unknown, Type: "); if (binary) { /* Type */ switch(binary) { case XYFT_L: conoll("labeled"); break; case XYFT_I: conoll("image"); break; case XYFT_U: conoll("binary undefined"); break; default: case XYFT_B: conoll("binary"); break; } } else { #ifdef NOCSETS conoll("text"); #else conol("text, "); if (tcharset == TC_TRANSP) { conoll("transparent"); } else { if (what == W_SEND) { conol(fcsinfo[fcharset].keyword); conol(" => "); conoll(tcsinfo[tcharset].keyword); } else { conol(tcsinfo[tcharset].keyword); conol(" => "); conoll(fcsinfo[fcharset].keyword); } } #endif /* NOCSETS */ } if (fdispla == XYFD_S) { /* CRT field headings */ /* Define CK_CPS to show current transfer rate. Leave it undefined to show estimated time remaining. Estimated-time-remaining code from Andy Fyfe, not tested on pathological cases. */ #define CK_CPS #ifdef CK_CPS conoll(" File Percent Packet"); conoll(" Bytes Done CPS Length"); #else conoll(" File Percent Secs Packet"); conoll(" Bytes Done Left Length"); #endif /* CK_CPS */ newdpy = 0; } hpos = 0; } /* showpkt(c) c = completion code: 0 means transfer in progress, nonzero means it's done. Show the file transfer progress counter and perhaps verbose packet type. Original by: Kai Uwe Rommel. */ VOID #ifdef CK_ANSIC showpkt(char c) #else showpkt(c) char c; #endif /* CK_ANSIC */ /* showpkt */ { long howfar; /* How far into file */ if (newdpy) /* Put up filenames, etc, */ dpyinit(); /* if they're not there already. */ howfar = ffc; /* How far */ if (fdispla == XYFD_S) { /* CRT display */ char buffer[40]; long et; /* Elapsed time, entire batch */ long pd; /* Percent done, this file */ long tp; /* Transfer rate, entire batch */ long ps; /* Packet size, current packet */ long mytfc; /* Local copy of byte counter */ et = gtimer(); /* Elapsed time */ ps = (what == W_RECV) ? rpktl : spktl; /* Packet length */ #ifdef CK_RESEND if (what == W_SEND) /* And if we didn't start at */ howfar += sendstart; /* the beginning... */ else if (what == W_RECV) howfar += rs_len; #endif /* CK_RESEND */ pd = -1; /* Percent done. */ if (c == NUL) { /* Still going, figure % done */ if (fsize == 0L) return; /* Empty file, don't bother */ pd = (fsize > 99L) ? (howfar / (fsize / 100L)) : 0L; if (pd > 100) pd = 100; /* Expansion */ } else pd = 100; /* File complete, so 100%. */ #ifndef CK_CPS /* fsecs = time (from gtimer) that this file started (set in sfile()). Rate so far is ffc / (et - fsecs), estimated time for remaining bytes is (fsize - ffc) / ( ffc / (et - fsecs )). */ tp = (howfar > 0L) ? (fsize - howfar) * (et - fsecs) / howfar : 0L; #endif /* CK_CPS */ #ifdef CK_CPS mytfc = (pd < 100) ? tfc + ffc : tfc; tp = (et > 0) ? mytfc / et : 0; /* Transfer rate */ if (c && (tp == 0)) /* Watch out for subsecond times */ tp = ffc; #endif /* CK_CPS */ if (pd > -1L) sprintf(buffer, "%c%9ld%5ld%%%8ld%8ld ", CR, howfar, pd, tp, ps); else sprintf(buffer, "%c%9ld %8ld%8ld ", CR, howfar, tp, ps); conol(buffer); hpos = 31; } else { /* SERIAL display */ long i, k; if (howfar - oldffc < 1024) /* Update display every 1K */ return; oldffc = howfar; /* Time for new display */ k = (howfar / 1024L) - dots; /* How many K so far */ for (i = 0L; i < k; i++) { if (hpos++ > 77) { /* Time to wrap? */ conoll(""); hpos = 0; } conoc('.'); /* Print a dot for this K */ dots++; /* Count it */ } } } /* S C R E E N -- Screen display function */ /* screen(f,c,n,s) f - argument descriptor c - a character or small integer n - a long integer s - a string. Fill in this routine with the appropriate display update for the system. FILE DISPLAY SERIAL: Default, works on any terminal, even hardcopy. FILE DISPLAY CRT: Works on any CRT, writes over current line. FILE DISPLAY FULLSCREEN: Requires terminal-dependent screen control. */ VOID #ifdef CK_ANSIC screen(int f, char c,long n,char *s) #else screen(f,c,n,s) int f; char c; long n; char *s; #endif /* CK_ANSIC */ /* screen */ { char buf[80]; int len; /* Length of string */ #ifdef UNIX #ifndef NOJC int obg; _PROTOTYP( VOID conbgt, (int) ); if (local) { obg = backgrd; /* Previous background status */ conbgt(1); /* See if running in background */ if (!backgrd && obg) { /* Just came into foreground? */ concb((char)escape); /* Put console back in CBREAK mode */ conint(trap,stptrap); /* Turn interrupts back on. */ } } #endif /* NOJC */ #endif /* UNIX */ if ((f != SCR_WM) && (f != SCR_EM)) /* Always update warnings & errors */ if (!displa || (backgrd && bgset) || fdispla == XYFD_N || (server && !srvdis) ) return; if (local && dest == DEST_S) /* SET DESTINATION SCREEN */ return; /* would interfere... */ #ifdef CK_CURSES if (fdispla == XYFD_C) { /* If fullscreen display selected */ screenc(f,c,n,s); /* call the fullscreen version */ return; } #endif /* CK_CURSES */ len = (int)strlen(s); /* Length of string */ switch (f) { /* Handle our function code */ case SCR_FN: /* Filename */ #ifdef MAC conoll(""); conol(s); conoc(SP); hpos = len + 1; #else strncpy(fbuf,s,80); newdpy = 1; /* New file so refresh display */ #endif /* MAC */ return; case SCR_AN: /* As-name */ #ifdef MAC if (hpos + len > 75) { conoll(""); hpos = 0; } conol("=> "); conol(s); if ((hpos += (len + 3)) > 78) { conoll(""); hpos = 0; } #else strncpy(abuf,s,80); #endif /* MAC */ return; case SCR_FS: /* File-size */ #ifdef MAC sprintf(buf,", Size: %ld",n); conoll(buf); hpos = 0; #endif /* MAC */ return; case SCR_XD: /* X-packet data */ #ifdef MAC conoll(""); conoll(s); hpos = 0; #else strncpy(fbuf,s,80); #endif /* MAC */ return; case SCR_ST: /* File status */ switch (c) { case ST_OK: /* Transferred OK */ showpkt('Z'); /* Update numbers one last time */ if ((hpos += 5) > 78) conoll(""); /* Wrap screen line if necessary. */ conoll(" [OK]"); hpos = 0; /* Print OK message. */ if (fdispla == XYFD_S) { /* We didn't show Z packet when */ conoc('Z'); /* it came, so show it now. */ hpos = 1; } return; case ST_DISC: /* Discarded */ if ((hpos += 12) > 78) conoll(""); conoll(" [discarded]"); hpos = 0; return; case ST_INT: /* Interrupted */ if ((hpos += 14) > 78) conoll(""); conoll(" [interrupted]"); hpos = 0; return; case ST_SKIP: /* Skipped */ if ((hpos += 10) > 78) conoll(""); conol(" [skipped]"); hpos = 0; return; case ST_ERR: /* Error */ conoll(""); conol("Error: "); conoll(s); hpos = 0; return; case ST_MSG: /* Message */ conoll(""); conol("Message: "); conoll(s); hpos = 0 ; return; case ST_REFU: /* Refused */ conoll(""); conol("Refused: "); conoll(s); hpos = 0; return; case ST_INC: /* Incomplete */ if ((hpos += 12) > 78) conoll(""); conoll(" [incomplete]"); hpos = 0; return; default: conoll("*** screen() called with bad status ***"); hpos = 0; return; } #ifdef MAC case SCR_PN: /* Packet number */ sprintf(buf,"%s: %ld",s,n); conol(buf); hpos += (int)strlen(buf); return; #endif /* MAC */ case SCR_PT: /* Packet type or pseudotype */ if (c == 'Y') return; /* Don't bother with ACKs */ if (c == 'D') { /* In data transfer phase, */ showpkt(NUL); /* show progress. */ return; } #ifndef AMIGA if (hpos++ > 77) { /* If near right margin, */ conoll(""); /* Start new line */ hpos = 0; /* and reset counter. */ } #endif /* AMIGA */ if (c == 'Z' && fdispla == XYFD_S) return; else conoc(c); /* Display the packet type. */ #ifdef AMIGA if (c == 'G') conoll(""); /* New line after G packets */ #endif /* AMIGA */ return; case SCR_TC: /* Transaction complete */ if (xfrbel) bleep(BP_NOTE); conoll(""); return; case SCR_EM: /* Error message */ conoll(""); conoc('?'); conoll(s); hpos = 0; return; case SCR_WM: /* Warning message */ conoll(""); conoll(s); hpos = 0; return; case SCR_TU: /* Undelimited text */ if ((hpos += len) > 77) { conoll(""); hpos = len; } conol(s); return; case SCR_TN: /* Text delimited at beginning */ conoll(""); conol(s); hpos = len; return; case SCR_TZ: /* Text delimited at end */ if ((hpos += len) > 77) { conoll(""); hpos = len; } conoll(s); return; case SCR_QE: /* Quantity equals */ sprintf(buf,"%s: %ld",s,n); conoll(buf); hpos = 0; return; case SCR_CW: /* Close fullscreen window */ return; /* No window to close */ case SCR_CD: return; default: conoll("*** screen() called with bad object ***"); hpos = 0; return; } } /* E R M S G -- Nonfatal error message */ /* Should be used only for printing the message text from an Error packet. */ VOID ermsg(msg) char *msg; { /* Print error message */ debug(F110,"ermsg",msg,0); if (local) screen(SCR_EM,0,0L,msg); tlog(F110,"Protocol Error:",msg,0L); } VOID doclean() { /* General cleanup upon exit */ #ifndef NOICP #ifndef NOSPL extern struct mtab *mactab; /* For ON_EXIT macro. */ extern int nmac; #endif /* NOSPL */ #endif /* NOICP */ if (pktlog) { *pktfil = '\0'; pktlog = 0; zclose(ZPFILE); } if (seslog) { *sesfil = '\0'; seslog = 0; zclose(ZSFILE); } #ifdef TLOG if (tralog) { tlog(F100,"Transaction Log Closed","",0L); *trafil = '\0'; tralog = 0; zclose(ZTFILE); } #endif /* TLOG */ #ifndef NOICP #ifndef NOSPL zclose(ZRFILE); /* READ and WRITE files, if any. */ zclose(ZWFILE); /* If a macro named "on_exit" is defined, execute it. Also remove it from the macro table, in case its definition includes an EXIT or QUIT command, which would cause much recursion and would prevent the program from ever actually EXITing. */ if (nmac) { /* Any macros defined? */ int k; /* Yes */ char * cmd = "on_exit"; /* MSVC 2.x compiler error */ k = mlook(mactab,cmd,nmac); /* Look up "on_exit" */ if (k >= 0) { /* If found, */ *(mactab[k].kwd) = NUL; /* poke its name from the table, */ if (dodo(k,"",0) > -1) /* set it up, */ parser(1); /* and execute it */ } } #endif /* NOSPL */ #endif /* NOICP */ /* Put console terminal back to normal. This is done here because the ON_EXIT macro calls the parser, which meddles with console terminal modes. */ ttclos(0); /* Close external line, if any */ if (local) { strcpy(ttname,dftty); /* Restore default tty */ local = dfloc; /* And default remote/local status */ } conres(); /* Restore console terminal. */ #ifdef COMMENT /* Should be no need for this, and maybe it's screwing things up? */ connoi(); /* Turn off console interrupt traps */ #endif /* COMMENT */ syscleanup(); /* System-dependent cleanup, last */ } /* D O E X I T -- Exit from the program. */ /* First arg is general, system-independent symbol: GOOD_EXIT or BAD_EXIT. If second arg is -1, take 1st arg literally. If second arg is not -1, work it into the exit code. */ VOID doexit(exitstat,what) int exitstat, what; { #ifdef VMS char envstr[64]; static $DESCRIPTOR(symnam,"CKERMIT_STATUS"); static struct dsc$descriptor_s symval; int i; #endif /* VMS */ debug(F101,"doexit exitstat","",exitstat); debug(F101,"doexit what","",what); #ifdef OS2 DialerSend(OPT_KERMIT_EXIT,exitstat); msleep(125); /* Wait for screen updates */ #endif /* OS2 */ doclean(); /* Clean up most things */ #ifdef VMS if (what == -1) what = 0; /* Since we set two different items */ sprintf(envstr,"%d", exitstat | what); symval.dsc$w_length = (int)strlen(envstr); symval.dsc$a_pointer = envstr; symval.dsc$b_class = DSC$K_CLASS_S; symval.dsc$b_dtype = DSC$K_DTYPE_T; i = 2; /* Store in global table */ #ifdef COMMENT /* Martin Zinser */ LIB$SET_SYMBOL(&symnam, &symval, &i); #else lib$set_symbol(&symnam, &symval, &i); #endif /* COMMENT */ if (exitstat == BAD_EXIT) exitstat = SS$_ABORT | STS$M_INHIB_MSG; if (exitstat == GOOD_EXIT) exitstat = SS$_NORMAL | STS$M_INHIB_MSG; #else /* Not VMS */ if (what != -1) /* Take 1st arg literally */ exitstat |= what; #endif /* VMS */ /* We have put this off till the very last moment... */ #ifdef DEBUG if (deblog) { /* Close the debug log. */ debug(F101,"C-Kermit EXIT status","",exitstat); *debfil = '\0'; deblog = 0; zclose(ZDFILE); } #endif /* DEBUG */ #ifdef NT DialerSend( OPT_KERMIT_EXIT, exitstat ) ; #endif /* NT */ exit(exitstat); /* Exit from C-Kermit */ } /* Set up interrupts */ VOID setint() { conint(trap,stptrap); /* Turn on console terminal interrupts. */ bgchk(); /* Check background status */ } VOID bgchk() { /* Check background status */ if (bgset < 0) pflag = !backgrd; /* Set prompt flag */ else /* based on foreground/background */ pflag = (bgset == 0 ? 1 : 0); /* Message flag on only if at top level, pflag is on, and QUIET is OFF */ if ( #ifndef NOSPL cmdlvl == 0 #else tlevel < 0 #endif /* NOSPL */ ) msgflg = (pflag == 0) ? 0 : !quiet; else msgflg = 0; } #ifdef DEBUG /* D E B U G -- Enter a record in the debugging log */ /* Call with a format, two strings, and a number: f - Format, a bit string in range 0-7. If bit x is on, then argument number x is printed. s1 - String, argument number 1. If selected, printed as is. s2 - String, argument number 2. If selected, printed in brackets. n - Long int, argument 3. If selected, printed preceded by equals sign. f=0 is special: print s1,s2, and interpret n as a char. */ /* WARNING: Don't change DEBUFL without changing sprintf() formats below, accordingly. */ #define DBUFL 2300 /* WARNING: This routine is not thread-safe, especially when Kermit is executing on multiple CPUs -- as different threads write to the same static buffer, the debug statements are all interleaved. To be fixed later... */ static char *dbptr = (char *)0; int #ifdef CK_ANSIC dodebug(int f, char *s1, char *s2, long n) #else dodebug(f,s1,s2,n) int f; char *s1, *s2; long n; #endif /* CK_ANSIC */ /* dodebug */ { char *sp; if (!deblog) return(0); /* If no debug log, don't. */ if (!dbptr) { /* Allocate memory buffer */ dbptr = malloc(DBUFL+1); /* This only happens once */ if (!dbptr) { deblog = 0; return(0); } } if (!s1) s1="(NULL)"; if (!s2) s2="(NULL)"; #ifdef COMMENT /* This should work, but it doesn't. So instead we'll cope with overflow via sprintf formats. N.B.: UNFORTUNATELY, this means we have to put constants in the sprintf formats. */ if (!f || (f & 6)) { /* String argument(s) included? */ x = (int) strlen(s1) + (int) strlen(s2) + 18; if (x > dbufl) { /* Longer than buffer? */ if (dbptr) /* Yes, free previous buffer */ free(dbptr); dbptr = (char *) malloc(x + 2); /* Allocate a new one */ if (!dbptr) { zsoutl(ZDFILE,"DEBUG: Memory allocation failure"); zclose(ZDFILE); deblog = 0; return(0); } else { dbufl = x; sprintf(dbptr,"DEBUG: Buffer expanded to %d\n", x + 18); zsoutl(ZDFILE,dbptr); } } } #endif /* COMMENT */ #ifdef COMMENT /* The aforementioned sprintf() formats were like this: */ if (n > 31 && n < 127) sprintf(sp,"%.100s%.2000s:%c\n",s1,s2,(CHAR) n); else if (n < 32 || n == 127) sprintf(sp,"%.100s%.2000s:^%c\n",s1,s2,(CHAR) ((n+64) & 0x7F)); else if (n > 127 && n < 160) sprintf(sp,"%.100s%.2000s:~^%c\n",s1,s2,(CHAR)((n-64) & 0x7F)); else if (n > 159 && n < 256) sprintf(sp,"%.100s%.2000s:~%c\n",s1,s2,(CHAR) (n & 0x7F)); else sprintf(sp,"%.100s%.2000s:%ld\n",s1,s2,n); /* But, naturally, it turns out these are not portable either, so now we do the stupidest possible thing. */ #endif /* COMMENT */ if ((int) strlen(s1) > 100) s1 = "(string too long)"; if ((int) strlen(s2) + 101 >= DBUFL) s2 = "(string too long)"; sp = dbptr; switch (f) { /* Write log record according to format. */ case F000: /* 0 = print both strings, and n as a char. */ if (n > 31 && n < 127) sprintf(sp,"%s%s:%c\n",s1,s2,(CHAR) n); else if (n < 32 || n == 127) sprintf(sp,"%s%s:^%c\n",s1,s2,(CHAR) ((n+64) & 0x7F)); else if (n > 127 && n < 160) sprintf(sp,"%s%s:~^%c\n",s1,s2,(CHAR)((n-64) & 0x7F)); else if (n > 159 && n < 256) sprintf(sp,"%s%s:~%c\n",s1,s2,(CHAR) (n & 0x7F)); else sprintf(sp,"%s%s:%ld\n",s1,s2,n); if (zsout(ZDFILE,dbptr) < 0) deblog = 0; break; case F001: /* 1, "=n" */ sprintf(sp,"=%ld\n",n); if (zsout(ZDFILE,dbptr) < 0) deblog = 0; break; case F010: /* 2, "[s2]" */ sprintf(sp,"[%s]\n",s2); if (zsout(ZDFILE,"") < 0) deblog = 0; break; case F011: /* 3, "[s2]=n" */ sprintf(sp,"[%s]=%ld\n",s2,n); if (zsout(ZDFILE,dbptr) < 0) deblog = 0; break; case F100: /* 4, "s1" */ if (zsoutl(ZDFILE,s1) < 0) deblog = 0; break; case F101: /* 5, "s1=n" */ sprintf(sp,"%s=%ld\n",s1,n); if (zsout(ZDFILE,dbptr) < 0) deblog = 0; break; case F110: /* 6, "s1[s2]" */ sprintf(sp,"%s[%s]\n",s1,s2); if (zsout(ZDFILE,dbptr) < 0) deblog = 0; break; case F111: /* 7, "s1[s2]=n" */ sprintf(sp,"%s[%s]=%ld\n",s1,s2,n); if (zsout(ZDFILE,dbptr) < 0) deblog = 0; break; default: sprintf(sp,"\n?Invalid format for debug() - %d\n",f); if (zsout(ZDFILE,dbptr) < 0) deblog = 0; } return(0); } #endif /* DEBUG */ #ifdef CK_CURSES /* F X D I N I T -- File Xfer Display Initialization */ VOID fxdinit() { #ifndef COHERENT #ifndef OS2 #ifdef VMS #ifdef __DECC _PROTOTYP(int tgetent,(char *, char *)); #endif /* __DECC */ #endif /* VMS */ char *s; int x; #ifdef DYNAMIC if (!trmbuf) { /* Allocate tgetent() buffer. Make it big -- some termcaps are pretty huge, and tgetent() doesn't do any range checking. */ trmbuf = (char *)malloc(8192); if (!trmbuf) { fdispla = XYFD_S; return; } } #endif /* DYNAMIC */ debug(F101,"fxdinit fdispla","",fdispla); if (fdispla == XYFD_C) { s = getenv("TERM"); if (!s) s = ""; if (*s) { x = tgetent(trmbuf,s); debug(F111,"fxdinit tgetent",s,x); } else { x = 0; debug(F100,"fxdinit TERM null - no tgetent","",0); } if (x < 1) { printf("Warning: terminal type unknown: \"%s\"\n",s); printf("Fullscreen file transfer display disabled.\n"); fdispla = XYFD_S; } } #endif /* OS2 */ #endif /* COHERENT */ } /* There are three different ways to do fullscreen on VMS. 1. Use the real curses library, VAXCCURSE. 2. Use do-it-yourself code. 3. Use the Screen Manager, SMG$. Method 1 doesn't work quite right; you can't call endwin(), so once you've started curses mode, you can never leave. Method 2 doesn't optimize the screen, and so much more time is spent in screen writes. This actually causes file transfers to fail because the tty device input buffer can be overrun while the screen is being updated, especially on a slow MicroVAX that has small typeahead buffers. In the following #ifdef block, #define one of them and #undef the other 2. So now let's try method 3... */ #ifdef VMS #define CK_SMG /* Screen Manager */ #undef MYCURSES /* Do-it-yourself */ #undef VMSCURSE /* VAXCCURSE library */ #endif /* VMS */ #ifdef MYCURSES #ifdef CK_WREFRESH #undef CK_WREFRESH #endif /* CK_WREFRESH */ #endif /* MYCURSES */ /* S C R E E N C -- Screen display function, uses curses */ /* Idea for curses display contributed by Chris Pratt of APV Baker, UK */ /* Avoid conficts with curses.h */ #ifdef QNX /* Same as ckcasc.h, but in a different radix... */ #ifdef ESC #undef ESC #endif /* ESC */ #endif /* QNX */ #ifndef MYCURSES #undef VOID /* This was defined in ckcdeb.h */ #endif /* MYCURSES */ #undef BS /* These were defined in ckcasc.h */ #undef CR #undef NL #undef SO #undef US #undef SP /* Used in ncurses */ #define CHR_SP 32 /* Use this instead */ #ifdef VMS /* VMS fullscreen display */ #ifdef MYCURSES /* Do-it-yourself method */ extern int isvt52; /* From CKVTIO.C */ #define printw printf #else #ifdef VMSCURSE /* VMS curses library VAXCCURSE */ #include /* Note: Screen manager doesn't need a header file */ #endif /* VMSCURSE */ #endif /* MYCURSES */ #else /* Not VMS */ #ifdef MYCURSES /* Do-it-yourself method */ #define isvt52 0 /* Used by OS/2, VT-100/ANSI always */ #define printw printf #else #include /* So use real curses */ #endif /* MYCURSES */ #endif /* VMS */ #ifdef CK_SMG /* Long section for Screen Manager starts here... By William Bader. */ #include "ckvvms.h" #ifdef OLD_VMS #include /* use this on VAX C 2.4 */ /* #include */ #else #include /* Martin Zinser */ #endif /* OLD_VMS */ extern unsigned int vms_status; /* Used for system service return status */ static long smg_pasteboard_id = -1; /* pasteboard identifier */ static long smg_display_id = -1; /* display identifier */ static int smg_open = 0; /* flag if smg current open */ #ifdef COMMENT #define clrtoeol() SMG$ERASE_LINE(&smg_display_id, 0, 0) #define clear() SMG$ERASE_DISPLAY(&smg_display_id, 0, 0, 0, 0) #define touchwin(scr) SMG$REPAINT_SCREEN(&smg_pasteboard_id) #else #define clrtoeol() smg$erase_line(&smg_display_id, 0, 0) #define clear() smg$erase_display(&smg_display_id, 0, 0, 0, 0) #define touchwin(scr) smg$repaint_screen(&smg_pasteboard_id) #endif /* COMMENT */ #define clearok(curscr,ok) /* Let wrefresh() do the work */ #define wrefresh(cursrc) touchwin(scr) static void move(row, col) int row, col; { /* Change from 0-based for curses to 1-based for SMG */ ++row; ++col; #ifdef COMMENT /* Martin Zinser */ CHECK_ERR("move: smg$set_cursor_abs", SMG$SET_CURSOR_ABS(&smg_display_id, &row, &col)); #else CHECK_ERR("move: smg$set_cursor_abs", smg$set_cursor_abs(&smg_display_id, &row, &col)); #endif /* COMMENT */ } static void refresh() { #ifdef COMMENT /* Martin Zinser */ CHECK_ERR("refresh: smg$end_pasteboard_update", SMG$END_PASTEBOARD_UPDATE(&smg_pasteboard_id)); CHECK_ERR("refresh: smg$begin_pasteboard_update", SMG$BEGIN_PASTEBOARD_UPDATE(&smg_pasteboard_id)); #else CHECK_ERR("refresh: smg$end_pasteboard_update", smg$end_pasteboard_update(&smg_pasteboard_id)); CHECK_ERR("refresh: smg$begin_pasteboard_update", smg$begin_pasteboard_update(&smg_pasteboard_id)); #endif /* COMMENT */ } #ifdef VMS_V40 #define OLD_VMS #endif /* VMS_V40 */ #ifdef VMS_V42 #define OLD_VMS #endif /* VMS_V42 */ #ifdef VMS_V44 #define OLD_VMS #endif /* VMS_V44 */ static int initscr() { int rows = 24, cols = 80; int row = 1, col = 1; if (smg_pasteboard_id == -1) { /* Open the screen */ #ifdef OLD_VMS /* Note: Routine calls lowercased 9/96 */ CHECK_ERR("initscr: smg$create_pasteboard", smg$create_pasteboard(&smg_pasteboard_id, 0, 0, 0, 0)); #else /* For VMS V5, not tested */ CHECK_ERR("initscr: smg$create_pasteboard", smg$create_pasteboard(&smg_pasteboard_id, 0, 0, 0, 0, 0)); #endif /* OLD_VMS */ } if (smg_display_id == -1) { /* Create a display window */ #ifdef COMMENT /* Martin Zinser */ CHECK_ERR("initscr: smg$create_virtual_display", SMG$CREATE_VIRTUAL_DISPLAY(&rows, &cols, &smg_display_id, 0, 0, 0)); /* Connect the display window to the screen */ CHECK_ERR("initscr: smg$paste_virtual_display", SMG$PASTE_VIRTUAL_DISPLAY(&smg_display_id,&smg_pasteboard_id, &row,&col)); #else CHECK_ERR("initscr: smg$create_virtual_display", smg$create_virtual_display(&rows, &cols, &smg_display_id, 0, 0, 0)); /* Connect the display window to the screen */ CHECK_ERR("initscr: smg$paste_virtual_display", smg$paste_virtual_display(&smg_display_id,&smg_pasteboard_id, &row,&col)); #endif /* COMMENT */ } if (!smg_open) { /* Start a batch update */ smg_open = 1; #ifdef COMMENT CHECK_ERR("initscr: smg$begin_pasteboard_update", SMG$BEGIN_PASTEBOARD_UPDATE(&smg_pasteboard_id)); #else CHECK_ERR("initscr: smg$begin_pasteboard_update", smg$begin_pasteboard_update(&smg_pasteboard_id)); #endif /* COMMENT */ } return(1); } static void endwin() { if (!smg_open) return; smg_open = 0; #ifdef COMMENT CHECK_ERR("endwin: smg$end_pasteboard_update", SMG$END_PASTEBOARD_UPDATE(&smg_pasteboard_id)); #else CHECK_ERR("endwin: smg$end_pasteboard_update", smg$end_pasteboard_update(&smg_pasteboard_id)); #endif /* COMMENT */ move(22, 0); #ifdef COMMENT /* These calls clear the screen. (convert routine calls to lowercase - Martin Zinser) */ CHECK_ERR("endwin: smg$delete_virtual_display", SMG$DELETE_VIRTUAL_DISPLAY(&smg_display_id)); smg_display_id = -1; CHECK_ERR("endwin: smg$delete_pasteboard", SMG$DELETE_PASTEBOARD(&smg_pasteboard_id, 0)); smg_pasteboard_id = -1; #endif /* COMMENT */ } static void printw(str, a1, a2, a3, a4, a5, a6, a7, a8) char *str; long a1, a2, a3, a4, a5, a6, a7, a8; /* printw */ { char buf[255]; #ifdef COMMENT /* Martin Zinser */ $DESCRIPTOR(text_dsc, buf); #else $DESCRIPTOR(text_dsc, 0); text_dsc.dsc$a_pointer=buf; #endif /* COMMENT */ text_dsc.dsc$w_length = sprintf(buf, str, a1, a2, a3, a4, a5, a6, a7, a8); #ifdef COMMENT /* Martin Zinser */ CHECK_ERR("printw: smg$put_chars", SMG$PUT_CHARS(&smg_display_id, &text_dsc, 0, 0, 0, 0, 0)); #else CHECK_ERR("printw: smg$put_chars", smg$put_chars(&smg_display_id, &text_dsc, 0, 0, 0, 0, 0)); #endif /* COMMENT */ } #endif /* CK_SMG */ #ifdef MYCURSES /* Do-it-yourself curses implementation for VMS, OS/2 and other ANSI/VT-100's. Supports only the VT52 and VT1xx (and later VT2xx/3xx/4xx) terminals. By Terry Kennedy, St Peters College. First, some stuff we can just ignore: */ int touchwin(x) int x; { return(0); } int initscr() { return(0); } int refresh() { return(0); } int endwin() { return(0); } /* * Now, some stuff we need to do: */ _PROTOTYP( int move, (int, int) ); #ifndef OS2 int move(row, col) int row, col; { if (isvt52) printf("\033Y%c%c", row + 037, col + 037); else printf("\033[%d;%dH", row + 1, col + 1); } int clear() { move(1,1); if (isvt52) printf("\033J"); else printf("\033[J"); } int clrtoeol() { if (isvt52) printf("\033K"); else printf("\033[K"); } #else /* OS2 */ /* Windows NT and Windows 95 do not provide ANSI emulation */ /* Therefore we might as well not use it for OS/2 either */ extern int cmd_rows, cmd_cols; extern unsigned char colorcmd; int move(row, col) int row, col; { #ifndef ONETERMUPD SetCurPos(row, col); #endif /* ONETERMUPD */ lgotoxy( VCMD, col+1, row+1); VscrnIsDirty(VCMD); return(0); } int clear() { viocell cell; move(0,0); #ifdef ONETERMUPD if (VscrnGetBufferSize(VCMD) > 0) { VscrnScroll(VCMD, UPWARD, 0, VscrnGetHeight(VCMD)-(1), VscrnGetHeight(VCMD)-(0), TRUE, CHR_SP); cleartermscreen(VCMD); } #else cell.c = ' '; cell.a = colorcmd; WrtNCell(cell, cmd_rows * cmd_cols, 0, 0); #endif /* ONETERMUPD */ return(0); } int clrtoeol() { USHORT row, col; viocell cell; cell.c = ' '; cell.a = colorcmd; #ifndef ONETERMUPD GetCurPos(&row, &col ); WrtNCell(cell, cmd_cols - col -1, row, col); #endif /* ONETERMUPD */ clrtoeoln(VCMD,CHR_SP); return(0); } #endif /* OS2 */ #endif /* MYCURSES */ static int cinit = 0; /* Flag for curses init'd */ static int cendw = 0; /* endwin() was called */ static #ifdef CK_ANSIC /* Because VOID used by curses.h */ void #else #ifdef MYCURSES VOID #else int #endif /* MYCURSES */ #endif /* CK_ANSIC */ #ifdef CK_ANSIC /* Update % transfered and % bar */ updpct(long old, long new) #else /* CK_ANSIC */ updpct(old, new) long old, new; #endif /* CK_ANSIC */ /* updpct */ { #ifdef COMMENT int m, n; move(CW_PCD,22); printw("%ld", new); #ifdef KUI KuiSetProperty(KUI_FILE_TRANSFER, (long) CW_PCD, (long) new); #endif /* KUI */ #ifdef CK_PCT_BAR if (thermometer) { if (old > new) { old = 0; move(CW_PCD, 26); clrtoeol(); } m = old/2; move(CW_PCD, 26 + m); n = new / 2 - m; #ifndef OS2 while (n > 0) { if (( m + 1) % 5 == 0) printw("*"); else printw("="); m++; n--; } if (new % 2 != 0) printw("-"); /* move(CW_PCD, 22+53); */ #else /* OS2 */ while (n > 0) { printw("%c", '\333'); m++; n--; } if (new % 2 != 0) printw("%c", '\261'); #endif /* OS2 */ } #endif /* CK_PCT_BAR */ /* clrtoeol(); */ #else /* !COMMENT */ #ifdef OS2 #define CHAR1 '\333' /* OS2 */ #define CHAR2 '\261' #else #define CHAR1 '/' /* Default */ #define CHAR2 '-' #endif /* OS2 */ move(CW_PCD,22); printw("%-3ld", new); /* (was) printw("%ld", new); */ #ifdef KUI KuiSetProperty( KUI_FILE_TRANSFER, (long) CW_PCD, (long) new ); #endif /* KUI */ #ifdef CK_PCT_BAR if (thermometer) { int m, n; if (old > new) { old = 0 ; move(CW_PCD, 26); clrtoeol(); } if (new <= 100L) { m = old / 2; n = new / 2 - m; move(CW_PCD, 26+m); while (n-- > 0) printw("%c", CHAR1); if (new % 2 != 0) printw("%c", CHAR2); } } #endif /* CK_PCT_BAR */ #endif /* COMMENT */ } static long gtv = -1L, oldgtv; static long shocps(pct) int pct; { static long oldffc = 0L; #ifndef CPS_WEIGHTED long secs; #endif /* CPS_WEIGHTED */ /* gtv starts at -1 but we want to ignore it until it is at least 1 */ oldgtv = (gtv >= 0) ? gtv : 0; gtv = gtimer(); #ifdef CPS_WEIGHTED if (gtv != oldgtv) { /* The first packet is ignored */ if (ffc < oldffc) oldffc = ffc; oldcps = cps; if (oldcps && oldgtv > 1) { /* The first second is ignored */ /* This version of shocps() produces a weighted average that some people like, but most people find it disconcerting and bombard us with questions and complaints about why the CPS figure fluctuates so wildly. So now you only get the weighted average if you build the program yourself with CPS_WEIGHTED defined. */ #ifndef CPS_VINCE /* Here is Jeff's weighting scheme, current = 25%, history = 75%.. */ cps = ( (oldcps * 3) + (ffc - oldffc) / (gtv-oldgtv) ) / 4; #else /* And an alternate weighting scheme from Vincent Fatica... */ cps = (3 * ((1+pct/300)*oldffc/oldgtv+(1-pct/100)*(ffc-oldffc)/(gtv-oldgtv))) / 4; #endif /* CPS_VINCE */ } else { /* No weighted average since there is nothing to weigh */ cps = gtv ? (ffc - oldffc) / (gtv - oldgtv) : (ffc - oldffc) ; } #ifdef DEBUG if (deblog) { debug(F101,"SHOCPS: pct ","",pct); debug(F101,"SHOCPS: gtv ","",gtv); debug(F101,"SHOCPS: oldgtv","",oldgtv); debug(F101,"SHOCPS: dgtv ","",gtv-oldgtv); debug(F101,"SHOCPS: ffc ","",ffc); debug(F101,"SHOCPS: oldffc","",oldffc); debug(F101,"SHOCPS: dffc ","",ffc-oldffc); debug(F101,"SHOCPS: cps ","",cps); } #endif /* DEBUG */ move(CW_CP,22); printw("%ld", cps); #ifdef KUI KuiSetProperty( KUI_FILE_TRANSFER, (long) CW_CP, (long) cps ); #endif /* KUI */ clrtoeol(); oldffc = ffc; } #else /* !CPS_WEIGHTED */ if (gtv != oldgtv) { /* The first packet is ignored */ if ((secs = gtv - fsecs) > 0) { cps = (secs < 1L) ? ffc : ffc / secs; move(CW_CP,22); #ifdef KUI KuiSetProperty( KUI_FILE_TRANSFER, (long) CW_CP, (long) cps ); #endif /* KUI */ printw("%ld", cps); clrtoeol(); } } #endif /* CPS_WEIGHTED */ return(cps); } static long #ifdef CK_ANSIC shoetl(long old_tr, long cps, long fsiz, long howfar ) #else shoetl(old_tr, cps, fsiz, howfar) long old_tr, cps, fsiz, howfar; #endif /* CK_ANSIC */ /* shoetl */ { /* Show estimated time left in transfer */ long tr ; tr = (fsiz > 0L && cps > 0L) ? ( ( fsiz - howfar ) / cps ) : -1L ; move(CW_TR,22); if ( tr > -1L ) { if ( tr != old_tr ) { printw("%s",hhmmss(tr)); #ifdef KUI KuiSetProperty(KUI_FILE_TRANSFER, (long)CW_TR, (long)hhmmss(tr)); #endif /* KUI */ clrtoeol(); } } else { printw("(unknown)"); #ifdef KUI KuiSetProperty( KUI_FILE_TRANSFER, (long) CW_TR, (long) "(unknown)" ); #endif /* KUI */ clrtoeol(); } return(tr); } static #ifdef CK_ANSIC /* Because VOID used by curses.h */ void #else #ifdef MYCURSES VOID #else int #endif /* MYCURSES */ #endif /* CK_ANSIC */ scrft() { /* Display file type */ char xferstr[80]; xferstr[0] = NUL; if (binary) { switch(binary) { case XYFT_L: strcpy( xferstr, "LABELED" ) ; break; case XYFT_I: strcpy( xferstr, "IMAGE" ); break; case XYFT_U: strcpy( xferstr, "BINARY UNDEFINED" ); break; default: case XYFT_B: strcpy( xferstr, "BINARY" ); break; } #ifdef CK_RESEND if (what == W_SEND && sendstart > 0L) { if (sendmode == SM_PSEND) { strcat( xferstr, " / partial"); } else if (sendmode == SM_RESEND) { strcat( xferstr, " / resend"); } } else if (what == W_RECV && rs_len > 0L) { strcat( xferstr, " / resend"); } #endif /* CK_RESEND */ } else { strcpy(xferstr, "TEXT") ; #ifndef NOCSETS if (tcharset == TC_TRANSP) { strcat( xferstr, " (no translation)"); } else { if (what == W_SEND) { sprintf( &xferstr[strlen(xferstr)], " (%s => %s)", fcsinfo[fcharset].keyword, tcsinfo[tcharset].keyword); } else { sprintf( &xferstr[strlen(xferstr)], " (%s => %s)", tcsinfo[tcharset].keyword, fcsinfo[fcharset].keyword); } } #endif /* NOCSETS */ } move(CW_TYP,22); printw("%s", xferstr); clrtoeol(); #ifdef KUI KuiSetProperty( KUI_FILE_TRANSFER, (long) CW_TYP, (long) xferstr ); #endif /* KUI */ return; } char * /* Convert seconds to hh:mm:ss */ #ifdef CK_ANSIC hhmmss(long x) #else hhmmss(x) long x; #endif /* CK_ANSIC */ /* hhmmss(x) */ { static char buf[10]; long s, h, m; h = x / 3600L; /* Hours */ x = x % 3600L; m = x / 60L; /* Minutes */ s = x % 60L; /* Seconds */ if (x > -1L) sprintf(buf,"%02ld:%02ld:%02ld",h,m,s); else buf[0] = NUL; return((char *)buf); } #ifdef CK_NEWTERM static FILE *ck_stdout = NULL; static int ck_fd = -1; #endif /* CK_NEWTERM */ static long pct = 100, oldpct = 0; /* Percent done */ static int oldtyp = 0, oldwin = -1, oldtry = -1, oldlen = -1; #ifdef NETCONN static char *netname[] = { "none", "TCP/IP", "TCP/IP", "X.25", "DECnet", "VAX PSI", "Named Pipes", "X.25", "NetBIOS", "SuperLAT" }; #endif /* NETCONN */ #ifdef CK_ANSIC void screenc(int f, char c,long n,char *s) #else #ifdef MYCURSES VOID #else int #endif /* MYCURSES */ screenc(f,c,n,s) int f; /* argument descriptor */ char c; /* a character or small integer */ long n; /* a long integer */ char *s; /* a string */ #endif /* CK_ANSIC */ /* screenc() */ { static int q = 0; static long fsiz = -1L; /* Copy of file size */ static long fcnt = 0L; /* Number of files transferred */ static long fbyt = 0L; /* Total file bytes of all files transferred */ static long old_tr = -1L; /* Time remaining */ static long howfar = 0L; /* How much of current file has been xfer'd. */ static int pctlbl = 0L; /* Percent done vs Bytes so far */ long cps = 0L; int len; /* Length of string */ int errors = 0; /* Error counter */ int x; /* Worker */ debug(F101,"screenc cinit","",cinit); debug(F101,"screenc cendw","",cendw); if (cinit == 0 || cendw > 0) { /* Handle borderline cases... */ if (f == SCR_CW) { /* Close window, but it's not open */ ft_win = 0; return; } if (f == SCR_EM || (f == SCR_PT && c == 'E')) { /* Fatal error before window open */ conoll(""); conoc('?'); conoll(s); return; /* Regular display */ } } if (cinit == 0) { /* Only call initscr() once */ cendw = 1; /* New window needs repainting */ #ifdef COMMENT if (!initscr()) { /* Oops, can't initialize window? */ /* In fact, this doesn't happen. "man curses" says initscr() halts the entire program if it fails, which is true on the systems where I've tested it. It will fail if your terminal type is not known to it. That's why SET FILE DISPLAY FULLSCREEN calls tgetent() to make sure the terminal type is known before allowing a curses display. */ fprintf(stderr,"CURSES INITSCR ERROR\r\n"); fdispla = XYFD_R; /* Go back to regular display */ return; } else { cinit++; /* Window initialized ok */ debug(F100,"CURSES INITSCR OK","",0); } #else /* Save some memory. */ #ifdef CK_NEWTERM /* (From Andy Fyfe ) System V curses seems to reserve the right to alter the buffering on the output FILE* without restoring it. Fortunately System V curses provides newterm(), an alternative to initscr(), that allows us to specify explicitly the terminal type and input and output FILE pointers. Thus we duplicate stdout, and let curses have the copy. The original remains unaltered. Unfortunately, newterm() seems to be particular to System V. */ s = getenv("TERM"); if (ck_fd < 0) { ck_fd = dup(fileno(stdout)); ck_stdout = (ck_fd >= 0) ? fdopen(ck_fd, "w") : NULL; } debug(F100,"screenc newterm...","",0); if (ck_stdout == NULL || newterm(s, ck_stdout, stdin) == 0) { fprintf(stderr, "Fullscreen display not supported for terminal type: %s\r\n",s); fdispla = XYFD_R; /* Go back to regular display */ return; } debug(F100,"screenc newterm ok","",0); #else debug(F100,"screen calling initscr","",0); initscr(); /* Initialize curses. */ debug(F100,"screen initscr ok","",0); #endif /* CK_NEWTERM */ cinit++; /* Remember curses was initialized. */ #endif /* COMMENT */ } ft_win = 1; /* Window is open */ if (repaint) { #ifdef CK_WREFRESH /* This totally repaints the screen, just what we want, but we can only do this with real curses, and then only if clearok() and wrefresh() are provided in the curses library. */ #ifdef OS2 RestoreCmdMode(); #else #ifdef QNX clearok(stdscr, 1); /* QNX doesn't have curscr */ wrefresh(stdscr); #else wrefresh(curscr); #endif /* QNX */ #endif /* OS2 */ #else /* No CK_WREFRESH */ /* Kermit's do-it-yourself method, works with all types of fullscreen support, but does not repaint all the fields. For example, the filename is lost, because it arrives at a certain time and never comes again, and Kermit presently does not save it anywhere. Making this method work for all fields would be a rather major recoding task, and would add a lot of complexity and storage space. */ cendw = 1; #endif /* CK_WREFRESH */ repaint = 0; } if (cendw) { /* endwin() was called previously */ #ifdef VMS initscr(); /* (or should have been!) */ clear(); touchwin(stdscr); refresh(); #else #ifdef QNX /* In QNX, if we don't call initscr() here we core dump. I don't have any QNX curses documentation, but other curses manuals say that initscr() should be called only once per application, and experience shows that on other systems, calling initscr() here generally results in a core dump. */ debug(F100,"screenc re-calling initscr QNX","",0); initscr(); clear(); refresh(); #ifdef COMMENT /* But even so, second and subsequent curses displays are messed up. Calling touchwin, refresh, etc, doesn't make any difference. */ debug(F100,"screenc calling touchwin QNX","",0); touchwin(stdscr); debug(F100,"screenc calling refresh QNX","",0); refresh(); #endif /* COMMENT */ #else /* All others... */ debug(F100,"screenc calling clear","",0); clear(); debug(F100,"screenc clear ok","",0); #endif /* QNX */ #endif /* VMS */ debug(F100,"screenc setup ok","",0); debug(F100,"screenc doing first move","",0); move(CW_BAN,0); /* Display the banner */ debug(F110,"screenc myhost",myhost,0); #ifdef TCPSOCKET debug(F110,"screenc myipaddr",myipaddr,0); #endif /* TCPSOCKET */ #ifdef HPUX1010 debug(F100,"screenc calling first printw...","",0); /* Right here is where HP-UX 10.10 libxcurse.1 Rev 76.20 hangs... */ #endif /* HPUX1010 */ if (myhost[0]) { #ifdef TCPSOCKET if (myipaddr[0] && strcmp((char *)myhost,(char *)myipaddr)) printw("%s, %s [%s]",versio,(char *)myhost,(char *)myipaddr); else #endif /* TCPSOCKET */ printw("%s, %s",versio,(char *)myhost); } else { printw("%s",versio); } #ifdef HPUX1010 debug(F100,"screenc first printw returns","",0); #endif /* HPUX1010 */ move(CW_DIR,3); printw("Current Directory: %s",zgtdir()); #ifdef KUI KuiSetProperty( KUI_FILE_TRANSFER, (long) CW_DIR, (long) zgtdir() ); #endif /* KUI */ if (network) { move(CW_LIN,8); printw("Network Host: %s",ttname); } else { move(CW_LIN,0); printw("Communication Device: %s",ttname); } #ifdef KUI KuiSetProperty( KUI_FILE_TRANSFER, (long) CW_LIN, (long) ttname ); #endif /* KUI */ if (network) { move(CW_SPD,8); printw("Network Type: "); } else { move(CW_SPD,1); printw("Communication Speed: "); } move(CW_SPD,22); /* Speed */ if (network) { #ifdef NETCONN printw("%s",netname[nettype]); #ifdef KUI KuiSetProperty(KUI_FILE_TRANSFER, (long) CW_SPD, (long) netname[nettype] ); #endif /* KUI */ #else printw("(network)"); #ifdef KUI KuiSetProperty(KUI_FILE_TRANSFER, (long) CW_SPD, (long) "(network)" ); #endif /* KUI */ #endif /* NETCONN */ } else { if (speed < 0L) speed = ttgspd(); if (speed > 0L) { if (speed == 8880) { printw("75/1200"); #ifdef KUI KuiSetProperty(KUI_FILE_TRANSFER, (long) CW_SPD, (long) "75/1200" ); #endif /* KUI */ } else { char speedbuf[64] ; sprintf(speedbuf, "%ld", speed); printw("%s",speedbuf); #ifdef KUI KuiSetProperty(KUI_FILE_TRANSFER, (long) CW_SPD, (long) speedbuf ); #endif /* KUI */ } } else { printw("unknown"); #ifdef KUI KuiSetProperty(KUI_FILE_TRANSFER, (long) CW_SPD, (long) "(unknown)" ); #endif /* KUI */ } } move(CW_PAR,14); printw("Parity: %s",parnam((char)parity)); #ifdef KUI KuiSetProperty(KUI_FILE_TRANSFER, (long) CW_PAR, (long) parnam((char)parity) ); #endif /* KUI */ #ifdef CK_TIMERS if (rttflg && protocol == PROTO_K) { move(CW_TMO, 9); printw("RTT/Timeout:"); } #endif /* CK_TIMERS */ move(CW_TYP,11); printw("File Type:"); move(CW_SIZ,11); printw("File Size:"); move(CW_PCD, 8); pctlbl = (what == W_SEND); printw("%s:", pctlbl ? "Percent Done" : "Bytes so far"); #ifdef XYZ_INTERNAL move(CW_BAR, 1); printw("%10s Protocol:",ptab[protocol].p_name); #endif /* XYZ_INTERNAL */ #ifdef CK_PCT_BAR if (thermometer) { oldpct = pct = 0; move(CW_BAR,22); printw(" ...10...20...30...40...50...60...70...80...90..100"); move(CW_BAR,22+56); } #endif /* CK_PCT_BAR */ move(CW_TR, 1); printw("Estimated Time Left:"); move(CW_CP, 2); printw("Transfer Rate, CPS:"); move(CW_WS, 8); printw("Window Slots:%s", protocol == PROTO_K ? "" : " N/A" ); move(CW_PT, 9); printw("Packet Type:"); #ifdef XYZ_INTERNAL if (protocol != PROTO_K) { move(CW_PC, 11); printw("I/O Count:"); move(CW_PL, 10); printw("I/O Length:"); } else { #endif /* XYZ_INTERNAL */ move(CW_PC, 8); printw("Packet Count:"); move(CW_PL, 7); printw("Packet Length:"); #ifdef XYZ_INTERNAL } #endif /* XYZ_INTERNAL */ #ifndef COMMENT move(CW_PR, 9); printw("Error Count:"); #else move(CW_PR, 2); printw("Packet Retry Count:"); #endif #ifdef COMMENT move(CW_PB, 2); printw("Packet Block Check:"); #endif /* COMMENT */ move(CW_ERR,10); printw("Last Error:"); move(CW_MSG, 8); printw("Last Message:"); #ifdef CK_NEED_SIG move(CW_INT, 0); printw( "<%s>X to cancel file, <%s>Z to cancel group, <%s> to resend last packet", dbchr(escape), dbchr(escape), dbchr(escape) ); move(CW_INT + 1, 0); printw( "<%s>E to send Error packet, ^C to quit immediately, <%s>L to refresh screen.", dbchr(escape), dbchr(escape) ); #else /* !CK_NEED_SIG */ move(CW_INT, 0); #ifdef OS2 if ( protocol == PROTO_K ) { printw( "X to cancel file, Z to cancel group, to resend last packet," ); } #else /* !OS2 */ printw( "X to cancel file, Z to cancel group, to resend last packet," ); #endif /* OS2 */ move(CW_INT + 1, 0); if (protocol == PROTO_K) { printw( #ifdef VMS "E to send Error packet, ^C to quit immediately, ^W to refresh screen." #else "E to send Error packet, ^C to quit immediately, ^L to refresh screen." #endif /* VMS */ ); } else { printw("^C to cancel file transfer."); } #endif /* CK_NEED_SIG */ refresh(); cendw = 0; } len = strlen(s); /* Length of argument string */ debug(F101,"SCREENC switch","",f); /* Handle our function code */ switch (f) { case SCR_FN: /* Filename */ fsiz = -1L; /* Invalidate previous file size */ move(CW_PCD,22); /* Erase percent done from last time */ #ifdef KUI KuiSetProperty( KUI_FILE_TRANSFER, (long) CW_PCD, (long) 0 ); #endif /* KUI */ clrtoeol(); move(CW_SIZ,22); /* Erase file size from last time */ #ifdef KUI KuiSetProperty( KUI_FILE_TRANSFER, (long) CW_SIZ, (long) 0 ); #endif /* KUI */ clrtoeol(); move(CW_ERR,22); /* And last error message */ #ifdef KUI KuiSetProperty( KUI_FILE_TRANSFER, (long) CW_ERR, (long) "" ); #endif /* KUI */ clrtoeol(); if (what == W_SEND) { /* If we're sending... */ #ifdef CK_RESEND switch (sendmode) { case SM_RESEND: move(CW_NAM,11); printw("RESENDING:"); break; default: move(CW_NAM,13); printw("SENDING:"); break; } #else move(CW_NAM,13); printw("SENDING:"); #endif /* CK_RESEND */ } else if (what == W_RECV) { /* If we're receiving... */ move(CW_NAM,11); printw("RECEIVING:"); } else { /* If we don't know... */ move(CW_NAM,11); /* (should never see this) */ printw("File Name:"); } move(CW_NAM,22); /* Display the filename */ if (len > 57) { printw("%.55s..",s); len = 57; } else printw("%s",s); #ifdef KUI KuiSetProperty( KUI_FILE_TRANSFER, (long) CW_NAM, (long) s ); #endif /* KUI */ q = len; /* Remember name length for later */ clrtoeol(); scrft(); /* Display file type (can change) */ refresh(); #ifdef OS2 SaveCmdMode(0, 0); #endif /* OS2 */ return; case SCR_AN: /* File as-name */ if (q + len + 4 < 58) { /* Will fit */ move(CW_NAM, 22 + q); printw(" => %s",s); #ifdef KUI KuiSetProperty( KUI_FILE_TRANSFER, (long) CW_NAM, (long) s ); #endif /* KUI */ } else { /* Too long */ move(CW_NAM, 22); /* Overwrite previous name */ q = 0; if (len + 4 > 57) { /* wg15 */ printw(" => %.51s..",s); /* wg15 */ len = 53; /* wg15 */ } else printw(" => %s",s); /* wg15 */ #ifdef KUI KuiSetProperty( KUI_FILE_TRANSFER, (long) CW_NAM, (long) s ); #endif /* KUI */ } q += len + 4; /* Remember horizontal position */ clrtoeol(); refresh(); #ifdef OS2 SaveCmdMode(0, 0); #endif /* OS2 */ return; case SCR_FS: /* File size */ fsiz = n; move(CW_SIZ,22); if (fsiz > -1L) { #ifdef KUI KuiSetProperty( KUI_FILE_TRANSFER, (long) CW_SIZ, (long) n ); #endif /* KUI */ printw("%ld",n); } clrtoeol(); move(CW_PCD, 8); if (fsiz > -1L) { /* Put up percent label */ pctlbl = 1; printw("Percent Done:"); } clrtoeol(); scrft(); /* File type */ refresh(); #ifdef OS2 SaveCmdMode(0, 0); #endif /* OS2 */ return; case SCR_PT: /* Packet type or pseudotype */ if (spackets < 5) { extern int sysindex; extern struct sysdata sysidlist[]; /* Things that won't change after the 4th packet */ move(CW_PAR,22); printw("%s",parnam((char)parity)); #ifdef KUI KuiSetProperty( KUI_FILE_TRANSFER, (long) CW_PAR, (long) parnam((char)parity) ); #endif /* KUI */ clrtoeol(); #ifdef COMMENT move(CW_PB, 22); /* Block check on this packet */ if (bctu == 4) printw("B"); else printw("%d",bctu); clrtoeol(); #endif /* COMMENT */ if (spackets == 4) { move(CW_LIN,8); if (protocol == PROTO_K && sysindex > -1) { if (network) { move(CW_LIN,8); printw("Network Host: %s (%s)", ttname, sysidlist[sysindex].sid_name ); } else { move(CW_LIN,0); printw("Communication Device: %s (remote host is %s)", ttname, sysidlist[sysindex].sid_name ); } clrtoeol(); } } } #ifdef CK_TIMERS if (rttflg && protocol == PROTO_K) { move(CW_TMO, 22); printw("%02ld / %02d", (rttdelay + 500) / 1000, rcvtimo); clrtoeol(); } #endif /* CK_TIMERS */ x = (what == W_RECV) ? /* Packet length */ rpktl+1 : spktl; if (x != oldlen) { /* But only if it changed. */ move(CW_PL, 22); printw("%d",x); #ifdef KUI KuiSetProperty( KUI_FILE_TRANSFER, (long) CW_PL, (long) x ); #endif /* KUI */ clrtoeol(); oldlen = x; } move(CW_PC, 22); /* Packet count (always). */ printw("%d", (what == W_RECV) ? rpackets : spackets); #ifdef KUI KuiSetProperty( KUI_FILE_TRANSFER, (long) CW_PC, (long) spackets ); #endif /* KUI */ clrtoeol(); /* down with short packets. */ if (protocol == PROTO_K && wcur != oldwin) { /* Window slots */ char ws[16]; /* only if changed */ sprintf(ws, "%d of %d", wcur < 1 ? 1 : wcur, wslotn); move(CW_WS, 22); printw("%s", ws); #ifdef KUI KuiSetProperty( KUI_FILE_TRANSFER, (long) CW_WS, (long) ws ); #endif /* KUI */ clrtoeol(); oldwin = wcur; } errors = retrans + crunched + timeouts; if (errors != oldtry) { /* Retry count, if changed */ move(CW_PR, 22); printw("%d",errors); #ifdef KUI KuiSetProperty( KUI_FILE_TRANSFER, (long) CW_PR, (long) errors ); #endif /* KUI */ clrtoeol(); oldtry = errors; } if (c != oldtyp && c != 'Y' && c != 'N') { /* Sender's packet type */ char type[2]; sprintf(type, "%c",c); move(CW_PT,22); printw("%s", type); #ifdef KUI KuiSetProperty( KUI_FILE_TRANSFER, (long) CW_PT, (long) type ); #endif /* KUI */ clrtoeol(); oldtyp = c; } switch (c) { /* Now handle specific packet types */ case 'S': /* Beginning of transfer */ fcnt = fbyt = 0L; /* Clear counters */ gtv = -1L; /* And old/new things... */ oldpct = pct = 0L; break; case 'D': /* Data packet */ if (fsiz > 0L) { /* Show percent done if known */ oldpct = pct; /* Remember previous percent */ howfar = ffc; #ifdef CK_RESEND if (what == W_SEND) /* Account for PSEND or RESEND */ howfar += sendstart; else if (what == W_RECV) howfar += rs_len; #endif /* CK_RESEND */ /* Percent done, to be displayed... */ pct = (fsiz > 99L) ? (howfar / (fsiz / 100L)) : 0L; if (pct > 100L || /* Allow for expansion and */ (oldpct == 99L && pct < 0L)) /* other boundary conditions */ pct = 100L; if (pct != oldpct) /* Only do this 100 times per file */ updpct(oldpct, pct); } else { move(CW_PCD,22); printw("%ld", ffc); } cps = shocps((int) pct); old_tr = shoetl(old_tr, cps, fsiz, howfar); break; case '%': /* Timeouts, retransmissions */ cps = shocps((int) pct); old_tr = shoetl(old_tr, cps, fsiz, howfar); errors = retrans + crunched + timeouts; if (errors != oldtry) { /* Error count, if changed */ move(CW_PR, 22); printw("%d",errors); clrtoeol(); #ifdef KUI KuiSetProperty(KUI_FILE_TRANSFER, (long) CW_PR, (long) errors ); #endif /* KUI */ } oldtry = errors; if (s) if (*s) { move(CW_ERR,22); printw("%s",s); clrtoeol(); #ifdef KUI KuiSetProperty(KUI_FILE_TRANSFER, (long) CW_ERR, (long) s); #endif /* KUI */ } break; case 'E': /* Error packet */ #ifdef COMMENT move(CW_ERR,22); /* Print its data field */ if (*s) { printw("%s",s); #ifdef KUI KuiSetProperty( KUI_FILE_TRANSFER, (long) CW_ERR, (long) s ); #endif /* KUI */ } clrtoeol(); #endif /* COMMENT */ fcnt = fbyt = 0L; /* So no bytes for this file */ break; case 'Q': /* Crunched packet */ cps = shocps((int) pct); old_tr = shoetl( old_tr, cps, fsiz, howfar ) ; move(CW_ERR,22); printw("Damaged Packet"); #ifdef KUI KuiSetProperty(KUI_FILE_TRANSFER, (long) CW_ERR, (long) "Damaged Packet" ); #endif /* KUI */ clrtoeol(); break; case 'T': /* Timeout */ cps = shocps((int) pct); old_tr = shoetl(old_tr, cps, fsiz, howfar); move(CW_ERR,22); printw("Timeout %d sec",rcvtimo); #ifdef KUI KuiSetProperty(KUI_FILE_TRANSFER, (long) CW_ERR, (long) "Timeout" ); #endif /* KUI */ clrtoeol(); errors = retrans + crunched + timeouts; if (errors != oldtry) { /* Error count, if changed */ move(CW_PR, 22); printw("%d",errors); #ifdef KUI KuiSetProperty(KUI_FILE_TRANSFER, (long) CW_PR, (long) errors ); #endif /* KUI */ clrtoeol(); oldtry = errors; } break; default: /* Others, do nothing */ break; } refresh(); #ifdef OS2 SaveCmdMode(0, 0); #endif /* OS2 */ return; case SCR_ST: /* File transfer status */ #ifdef COMMENT move(CW_PCD,22); /* Update percent done */ if (c == ST_OK) { /* OK, print 100 % */ if (pctlbl) updpct(oldpct,100); else printw("%ld", ffc); pct = 100; oldpct = 0; } else if (fsiz > 0L) /* Not OK, update final percent */ /* The else part writes all over the screen -- howfar and/or fsiz have been reset as a consequence of the not-OKness of the transfer. */ if (pctlbl) updpct(oldpct, (howfar * 100L) / fsiz); clrtoeol(); #else if (c == ST_OK) { /* OK, print 100 % */ move(CW_PCD,22); /* Update percent done */ if (pctlbl) updpct(oldpct,100); else printw("%ld", ffc); pct = 100; oldpct = 0; clrtoeol(); } #endif /* COMMENT */ move(CW_MSG,22); /* Remove any previous message */ #ifdef KUI KuiSetProperty( KUI_FILE_TRANSFER, (long) CW_MSG, (long) "" ); #endif /* KUI */ clrtoeol(); refresh(); move(CW_TR, 22); #ifdef KUI KuiSetProperty( KUI_FILE_TRANSFER, (long) CW_TR, (long) "" ); #endif /* KUI */ clrtoeol(); refresh(); switch (c) { /* Print new status message */ case ST_OK: /* Transfer OK */ fcnt++; /* Count this file */ fbyt += ffc; /* Count its bytes */ move(CW_MSG,22); printw("Transfer OK"); /* Say Transfer was OK */ #ifdef KUI KuiSetProperty(KUI_FILE_TRANSFER, (long) CW_MSG, (long) "Transfer OK" ); #endif /* KUI */ clrtoeol(); refresh(); return; case ST_DISC: /* Discarded */ move(CW_ERR,22); printw("File discarded"); #ifdef KUI KuiSetProperty(KUI_FILE_TRANSFER, (long) CW_ERR, (long) "File discarded" ); #endif /* KUI */ pct = oldpct = 0; clrtoeol(); refresh(); return; case ST_INT: /* Interrupted */ move(CW_ERR,22); printw("Transfer interrupted"); #ifdef KUI KuiSetProperty(KUI_FILE_TRANSFER, (long) CW_ERR, (long) "Transfer interrupted" ); #endif /* KUI */ pct = oldpct = 0; clrtoeol(); refresh(); return; case ST_SKIP: /* Skipped */ move(CW_ERR,22); printw("File skipped"); #ifdef KUI KuiSetProperty(KUI_FILE_TRANSFER, (long) CW_ERR, (long) "File skipped" ); #endif /* KUI */ pct = oldpct = 0; clrtoeol(); refresh(); return; case ST_ERR: /* Error message */ move(CW_ERR,22); printw("%s",s); #ifdef KUI KuiSetProperty( KUI_FILE_TRANSFER, (long) CW_ERR, (long) s ); #endif /* KUI */ pct = oldpct = 0; clrtoeol(); refresh(); return; case ST_REFU: /* Refused */ move(CW_ERR,22); if (*s) { char errbuf[64] ; sprintf( errbuf, "Refused, %s", s ) ; printw("%s", errbuf); #ifdef KUI KuiSetProperty(KUI_FILE_TRANSFER,(long) CW_ERR,(long) errbuf); #endif /* KUI */ } else { printw("Refused"); #ifdef KUI KuiSetProperty(KUI_FILE_TRANSFER,(long)CW_ERR,(long)"Refused"); #endif /* KUI */ } pct = oldpct = 0; clrtoeol(); refresh(); return; case ST_INC: move(CW_ERR,22); printw("Incomplete"); #ifdef KUI KuiSetProperty(KUI_FILE_TRANSFER,(long)CW_ERR,(long)"Incomplete"); #endif /* KUI */ pct = oldpct = 0; clrtoeol(); refresh(); return; case ST_MSG: move(CW_MSG,22); printw("%s",s); #ifdef KUI KuiSetProperty(KUI_FILE_TRANSFER,(long)CW_MSG,(long)s); #endif /* KUI */ clrtoeol(); refresh(); return; default: /* Bad call */ move(CW_ERR,22); printw("*** screen() called with bad status ***"); #ifdef KUI KuiSetProperty( KUI_FILE_TRANSFER, (long) CW_ERR, (long) "*** screen() called with bad status ***" ); #endif /* KUI */ clrtoeol(); refresh(); return; } case SCR_TC: { /* Transaction complete */ long ecps; char msgbuf[128]; int eff = -1; ecps = (tsecs > 0) ? ((fbyt * 10L) / (long) tsecs) / 10L : fbyt; move(CW_CP,22); /* Overall transfer rate */ #ifdef KUI KuiSetProperty( KUI_FILE_TRANSFER, (long) CW_CP, (long) ecps ); #endif /* KUI */ printw("%ld", ecps); clrtoeol(); move(CW_MSG,22); /* Print statistics in message line */ clrtoeol(); #ifdef COMMENT if (speed > 99L && speed != 8880L && network == 0) eff = (((ecps * 100L) / (speed / 100L)) + 5L) / 10L; if (eff > -1) sprintf(msgbuf, "Files: %ld, Total Bytes: %ld, Efficiency: %d%%", fcnt, fbyt, eff ); else #endif /* COMMENT */ sprintf(msgbuf, "Files: %ld, Bytes: %ld, %ld CPS", fcnt, fbyt, ecps ); printw("%s", msgbuf); #ifdef KUI KuiSetProperty(KUI_FILE_TRANSFER, (long) CW_MSG, (long) msgbuf); #endif /* KUI */ clrtoeol(); move(CW_TR, 1); printw(" Elapsed Time: %s",hhmmss((long)tsecs)); #ifdef KUI KuiSetProperty(KUI_FILE_TRANSFER, (long) CW_TR, (long) hhmmss((long)tsecs) ); #endif /* KUI */ clrtoeol(); move(23,0); clrtoeol(); /* Clear instructions lines */ move(22,0); clrtoeol(); /* to make room for prompt. */ refresh(); #ifndef VMSCURSE endwin(); #ifdef SOLARIS conres(); #endif /* SOLARIS */ #endif /* VMSCURSE */ pct = 100; oldpct = 0; /* Reset these for next time. */ oldtyp = 0; oldwin = -1; oldtry = -1; oldlen = -1; cendw = 1; if (xfrbel) bleep(BP_NOTE); /* Close window, then beep. */ ft_win = 0; /* Window closed. */ return; } case SCR_EM: /* Error packet (fatal) */ move (CW_ERR,22); printw("%s",s); #ifdef KUI KuiSetProperty( KUI_FILE_TRANSFER, (long) CW_ERR, (long) s ); #endif /* KUI */ if (xfrbel) bleep(BP_FAIL); pct = oldpct = 0; clrtoeol(); refresh(); return; case SCR_QE: /* Quantity equals */ case SCR_TU: /* Undelimited text */ case SCR_TN: /* Text delimited at start */ case SCR_TZ: /* Text delimited at end */ return; /* (ignored in fullscreen display) */ case SCR_XD: /* X-packet data */ move(CW_NAM,22); printw("%s",s); #ifdef KUI KuiSetProperty( KUI_FILE_TRANSFER, (long) CW_NAM, (long) s ); #endif /* KUI */ clrtoeol(); refresh(); return; case SCR_CW: /* Close Window */ clrtoeol(); move(23,0); clrtoeol(); move(22,0); clrtoeol(); refresh(); pct = 100; oldpct = 0; /* Reset these for next time. */ oldtyp = 0; oldwin = -1; oldtry = -1; oldlen = -1; #ifndef VMSCURSE endwin(); #endif /* VMSCURSE */ ft_win = 0; /* Flag that window is closed. */ cendw = 1; return; case SCR_CD: /* Display current directory */ move(CW_DIR,22); printw("%s", s); #ifdef KUI KuiSetProperty( KUI_FILE_TRANSFER, (long) CW_DIR, (long) s ); #endif /* KUI */ clrtoeol(); refresh(); #ifdef OS2 SaveCmdMode(0, 0); #endif /* OS2 */ return; default: /* Bad call */ move (CW_ERR,22); #ifdef KUI KuiSetProperty(KUI_FILE_TRANSFER, (long) CW_ERR, (long) "*** screen() called with bad function code ***" ); #endif /* KUI */ printw("*** screen() called with bad function code ***"); clrtoeol(); refresh(); return; } } #endif /* CK_CURSES */ #endif /* MAC */