/* $NetBSD: if_ure.c,v 1.58.4.2 2024/10/13 15:27:01 martin Exp $ */ /* $OpenBSD: if_ure.c,v 1.10 2018/11/02 21:32:30 jcs Exp $ */ /*- * Copyright (c) 2015-2016 Kevin Lo * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /* RealTek RTL8152/RTL8153 10/100/Gigabit USB Ethernet device */ #include __KERNEL_RCSID(0, "$NetBSD: if_ure.c,v 1.58.4.2 2024/10/13 15:27:01 martin Exp $"); #ifdef _KERNEL_OPT #include "opt_usb.h" #include "opt_inet.h" #endif #include #include #include #include #include /* XXX for in_undefer_cksum() */ #ifdef INET6 #include #include /* XXX for in6_undefer_cksum() */ #endif #include /* XXX for RTK_GMEDIASTAT */ #include #include #define URE_PRINTF(un, fmt, args...) \ device_printf((un)->un_dev, "%s: " fmt, __func__, ##args); #define URE_DEBUG #ifdef URE_DEBUG #define DPRINTF(x) do { if (uredebug) printf x; } while (0) #define DPRINTFN(n, x) do { if (uredebug >= (n)) printf x; } while (0) int uredebug = 0; #else #define DPRINTF(x) #define DPRINTFN(n, x) #endif #define ETHER_IS_ZERO(addr) \ (!(addr[0] | addr[1] | addr[2] | addr[3] | addr[4] | addr[5])) static const struct usb_devno ure_devs[] = { { USB_VENDOR_REALTEK, USB_PRODUCT_REALTEK_RTL8152 }, { USB_VENDOR_REALTEK, USB_PRODUCT_REALTEK_RTL8153 }, { USB_VENDOR_TPLINK, USB_PRODUCT_TPLINK_UE300 }, }; #define URE_BUFSZ (16 * 1024) static void ure_reset(struct usbnet *); static uint32_t ure_txcsum(struct mbuf *); static int ure_rxcsum(struct ifnet *, struct ure_rxpkt *); static void ure_rtl8152_init(struct usbnet *); static void ure_rtl8153_init(struct usbnet *); static void ure_disable_teredo(struct usbnet *); static void ure_init_fifo(struct usbnet *); static void ure_uno_stop(struct ifnet *, int); static void ure_uno_mcast(struct ifnet *); static int ure_uno_mii_read_reg(struct usbnet *, int, int, uint16_t *); static int ure_uno_mii_write_reg(struct usbnet *, int, int, uint16_t); static void ure_uno_miibus_statchg(struct ifnet *); static unsigned ure_uno_tx_prepare(struct usbnet *, struct mbuf *, struct usbnet_chain *); static void ure_uno_rx_loop(struct usbnet *, struct usbnet_chain *, uint32_t); static int ure_uno_init(struct ifnet *); static int ure_match(device_t, cfdata_t, void *); static void ure_attach(device_t, device_t, void *); CFATTACH_DECL_NEW(ure, sizeof(struct usbnet), ure_match, ure_attach, usbnet_detach, usbnet_activate); static const struct usbnet_ops ure_ops = { .uno_stop = ure_uno_stop, .uno_mcast = ure_uno_mcast, .uno_read_reg = ure_uno_mii_read_reg, .uno_write_reg = ure_uno_mii_write_reg, .uno_statchg = ure_uno_miibus_statchg, .uno_tx_prepare = ure_uno_tx_prepare, .uno_rx_loop = ure_uno_rx_loop, .uno_init = ure_uno_init, }; static int ure_ctl(struct usbnet *un, uint8_t rw, uint16_t val, uint16_t index, void *buf, int len) { usb_device_request_t req; usbd_status err; if (usbnet_isdying(un)) return 0; if (rw == URE_CTL_WRITE) req.bmRequestType = UT_WRITE_VENDOR_DEVICE; else req.bmRequestType = UT_READ_VENDOR_DEVICE; req.bRequest = UR_SET_ADDRESS; USETW(req.wValue, val); USETW(req.wIndex, index); USETW(req.wLength, len); DPRINTFN(5, ("ure_ctl: rw %d, val %04hu, index %04hu, len %d\n", rw, val, index, len)); err = usbd_do_request(un->un_udev, &req, buf); if (err) { DPRINTF(("ure_ctl: error %d\n", err)); if (rw == URE_CTL_READ) memset(buf, 0, len); return -1; } return 0; } static int ure_read_mem(struct usbnet *un, uint16_t addr, uint16_t index, void *buf, int len) { return ure_ctl(un, URE_CTL_READ, addr, index, buf, len); } static int ure_write_mem(struct usbnet *un, uint16_t addr, uint16_t index, void *buf, int len) { return ure_ctl(un, URE_CTL_WRITE, addr, index, buf, len); } static uint8_t ure_read_1(struct usbnet *un, uint16_t reg, uint16_t index) { uint32_t val; uint8_t temp[4]; uint8_t shift; shift = (reg & 3) << 3; reg &= ~3; ure_read_mem(un, reg, index, &temp, 4); val = UGETDW(temp); val >>= shift; return val & 0xff; } static uint16_t ure_read_2(struct usbnet *un, uint16_t reg, uint16_t index) { uint32_t val; uint8_t temp[4]; uint8_t shift; shift = (reg & 2) << 3; reg &= ~3; ure_read_mem(un, reg, index, &temp, 4); val = UGETDW(temp); val >>= shift; return val & 0xffff; } static uint32_t ure_read_4(struct usbnet *un, uint16_t reg, uint16_t index) { uint8_t temp[4]; ure_read_mem(un, reg, index, &temp, 4); return UGETDW(temp); } static int ure_write_1(struct usbnet *un, uint16_t reg, uint16_t index, uint32_t val) { uint16_t byen; uint8_t temp[4]; uint8_t shift; byen = URE_BYTE_EN_BYTE; shift = reg & 3; val &= 0xff; if (reg & 3) { byen <<= shift; val <<= (shift << 3); reg &= ~3; } USETDW(temp, val); return ure_write_mem(un, reg, index | byen, &temp, 4); } static int ure_write_2(struct usbnet *un, uint16_t reg, uint16_t index, uint32_t val) { uint16_t byen; uint8_t temp[4]; uint8_t shift; byen = URE_BYTE_EN_WORD; shift = reg & 2; val &= 0xffff; if (reg & 2) { byen <<= shift; val <<= (shift << 3); reg &= ~3; } USETDW(temp, val); return ure_write_mem(un, reg, index | byen, &temp, 4); } static int ure_write_4(struct usbnet *un, uint16_t reg, uint16_t index, uint32_t val) { uint8_t temp[4]; USETDW(temp, val); return ure_write_mem(un, reg, index | URE_BYTE_EN_DWORD, &temp, 4); } static uint16_t ure_ocp_reg_read(struct usbnet *un, uint16_t addr) { uint16_t reg; ure_write_2(un, URE_PLA_OCP_GPHY_BASE, URE_MCU_TYPE_PLA, addr & 0xf000); reg = (addr & 0x0fff) | 0xb000; return ure_read_2(un, reg, URE_MCU_TYPE_PLA); } static void ure_ocp_reg_write(struct usbnet *un, uint16_t addr, uint16_t data) { uint16_t reg; ure_write_2(un, URE_PLA_OCP_GPHY_BASE, URE_MCU_TYPE_PLA, addr & 0xf000); reg = (addr & 0x0fff) | 0xb000; ure_write_2(un, reg, URE_MCU_TYPE_PLA, data); } static int ure_uno_mii_read_reg(struct usbnet *un, int phy, int reg, uint16_t *val) { if (un->un_phyno != phy) { *val = 0; return EINVAL; } /* Let the rgephy driver read the URE_PLA_PHYSTATUS register. */ if (reg == RTK_GMEDIASTAT) { *val = ure_read_1(un, URE_PLA_PHYSTATUS, URE_MCU_TYPE_PLA); return USBD_NORMAL_COMPLETION; } *val = ure_ocp_reg_read(un, URE_OCP_BASE_MII + reg * 2); return 0; } static int ure_uno_mii_write_reg(struct usbnet *un, int phy, int reg, uint16_t val) { if (un->un_phyno != phy) return EINVAL; ure_ocp_reg_write(un, URE_OCP_BASE_MII + reg * 2, val); return 0; } static void ure_uno_miibus_statchg(struct ifnet *ifp) { struct usbnet * const un = ifp->if_softc; struct mii_data * const mii = usbnet_mii(un); if (usbnet_isdying(un)) return; if ((mii->mii_media_status & (IFM_ACTIVE | IFM_AVALID)) == (IFM_ACTIVE | IFM_AVALID)) { switch (IFM_SUBTYPE(mii->mii_media_active)) { case IFM_10_T: case IFM_100_TX: usbnet_set_link(un, true); break; case IFM_1000_T: if ((un->un_flags & URE_FLAG_8152) != 0) break; usbnet_set_link(un, true); break; default: break; } } } static void ure_uno_mcast(struct ifnet *ifp) { struct usbnet *un = ifp->if_softc; struct ethercom *ec = usbnet_ec(un); struct ether_multi *enm; struct ether_multistep step; uint32_t mchash[2] = { 0, 0 }; uint32_t h = 0, rxmode; if (usbnet_isdying(un)) return; rxmode = ure_read_4(un, URE_PLA_RCR, URE_MCU_TYPE_PLA); rxmode &= ~(URE_RCR_AAP | URE_RCR_AM); /* continue to accept my own DA and bcast frames */ ETHER_LOCK(ec); if (usbnet_ispromisc(un)) { ec->ec_flags |= ETHER_F_ALLMULTI; ETHER_UNLOCK(ec); /* run promisc. mode */ rxmode |= URE_RCR_AM; /* ??? */ rxmode |= URE_RCR_AAP; mchash[0] = mchash[1] = 0xffffffff; goto update; } ec->ec_flags &= ~ETHER_F_ALLMULTI; ETHER_FIRST_MULTI(step, ec, enm); while (enm != NULL) { if (memcmp(enm->enm_addrlo, enm->enm_addrhi, ETHER_ADDR_LEN)) { ec->ec_flags |= ETHER_F_ALLMULTI; ETHER_UNLOCK(ec); /* accept all mcast frames */ rxmode |= URE_RCR_AM; mchash[0] = mchash[1] = ~0U; /* necessary ?? */ goto update; } h = ether_crc32_be(enm->enm_addrlo, ETHER_ADDR_LEN); mchash[h >> 31] |= 1U << ((h >> 26) & 0x1f); ETHER_NEXT_MULTI(step, enm); } ETHER_UNLOCK(ec); if (h != 0) { rxmode |= URE_RCR_AM; /* activate mcast hash filter */ h = bswap32(mchash[0]); mchash[0] = bswap32(mchash[1]); mchash[1] = h; } update: ure_write_4(un, URE_PLA_MAR0, URE_MCU_TYPE_PLA, mchash[0]); ure_write_4(un, URE_PLA_MAR4, URE_MCU_TYPE_PLA, mchash[1]); ure_write_4(un, URE_PLA_RCR, URE_MCU_TYPE_PLA, rxmode); } static void ure_reset(struct usbnet *un) { int i; ure_write_1(un, URE_PLA_CR, URE_MCU_TYPE_PLA, URE_CR_RST); for (i = 0; i < URE_TIMEOUT; i++) { if (usbnet_isdying(un)) return; if (!(ure_read_1(un, URE_PLA_CR, URE_MCU_TYPE_PLA) & URE_CR_RST)) break; usbd_delay_ms(un->un_udev, 10); } if (i == URE_TIMEOUT) URE_PRINTF(un, "reset never completed\n"); } static int ure_uno_init(struct ifnet *ifp) { struct usbnet * const un = ifp->if_softc; uint8_t eaddr[8]; /* Set MAC address. */ memset(eaddr, 0, sizeof(eaddr)); memcpy(eaddr, CLLADDR(ifp->if_sadl), ETHER_ADDR_LEN); ure_write_1(un, URE_PLA_CRWECR, URE_MCU_TYPE_PLA, URE_CRWECR_CONFIG); ure_write_mem(un, URE_PLA_IDR, URE_MCU_TYPE_PLA | URE_BYTE_EN_SIX_BYTES, eaddr, 8); ure_write_1(un, URE_PLA_CRWECR, URE_MCU_TYPE_PLA, URE_CRWECR_NORAML); /* Reset the packet filter. */ ure_write_2(un, URE_PLA_FMC, URE_MCU_TYPE_PLA, ure_read_2(un, URE_PLA_FMC, URE_MCU_TYPE_PLA) & ~URE_FMC_FCR_MCU_EN); ure_write_2(un, URE_PLA_FMC, URE_MCU_TYPE_PLA, ure_read_2(un, URE_PLA_FMC, URE_MCU_TYPE_PLA) | URE_FMC_FCR_MCU_EN); /* Enable transmit and receive. */ ure_write_1(un, URE_PLA_CR, URE_MCU_TYPE_PLA, ure_read_1(un, URE_PLA_CR, URE_MCU_TYPE_PLA) | URE_CR_RE | URE_CR_TE); ure_write_2(un, URE_PLA_MISC_1, URE_MCU_TYPE_PLA, ure_read_2(un, URE_PLA_MISC_1, URE_MCU_TYPE_PLA) & ~URE_RXDY_GATED_EN); return 0; } static void ure_uno_stop(struct ifnet *ifp, int disable __unused) { struct usbnet * const un = ifp->if_softc; ure_reset(un); } static void ure_rtl8152_init(struct usbnet *un) { uint32_t pwrctrl; /* Disable ALDPS. */ ure_ocp_reg_write(un, URE_OCP_ALDPS_CONFIG, URE_ENPDNPS | URE_LINKENA | URE_DIS_SDSAVE); usbd_delay_ms(un->un_udev, 20); if (un->un_flags & URE_FLAG_VER_4C00) { ure_write_2(un, URE_PLA_LED_FEATURE, URE_MCU_TYPE_PLA, ure_read_2(un, URE_PLA_LED_FEATURE, URE_MCU_TYPE_PLA) & ~URE_LED_MODE_MASK); } ure_write_2(un, URE_USB_UPS_CTRL, URE_MCU_TYPE_USB, ure_read_2(un, URE_USB_UPS_CTRL, URE_MCU_TYPE_USB) & ~URE_POWER_CUT); ure_write_2(un, URE_USB_PM_CTRL_STATUS, URE_MCU_TYPE_USB, ure_read_2(un, URE_USB_PM_CTRL_STATUS, URE_MCU_TYPE_USB) & ~URE_RESUME_INDICATE); ure_write_2(un, URE_PLA_PHY_PWR, URE_MCU_TYPE_PLA, ure_read_2(un, URE_PLA_PHY_PWR, URE_MCU_TYPE_PLA) | URE_TX_10M_IDLE_EN | URE_PFM_PWM_SWITCH); pwrctrl = ure_read_4(un, URE_PLA_MAC_PWR_CTRL, URE_MCU_TYPE_PLA); pwrctrl &= ~URE_MCU_CLK_RATIO_MASK; pwrctrl |= URE_MCU_CLK_RATIO | URE_D3_CLK_GATED_EN; ure_write_4(un, URE_PLA_MAC_PWR_CTRL, URE_MCU_TYPE_PLA, pwrctrl); ure_write_2(un, URE_PLA_GPHY_INTR_IMR, URE_MCU_TYPE_PLA, URE_GPHY_STS_MSK | URE_SPEED_DOWN_MSK | URE_SPDWN_RXDV_MSK | URE_SPDWN_LINKCHG_MSK); /* Enable Rx aggregation. */ ure_write_2(un, URE_USB_USB_CTRL, URE_MCU_TYPE_USB, ure_read_2(un, URE_USB_USB_CTRL, URE_MCU_TYPE_USB) & ~URE_RX_AGG_DISABLE); /* Disable ALDPS. */ ure_ocp_reg_write(un, URE_OCP_ALDPS_CONFIG, URE_ENPDNPS | URE_LINKENA | URE_DIS_SDSAVE); usbd_delay_ms(un->un_udev, 20); ure_init_fifo(un); ure_write_1(un, URE_USB_TX_AGG, URE_MCU_TYPE_USB, URE_TX_AGG_MAX_THRESHOLD); ure_write_4(un, URE_USB_RX_BUF_TH, URE_MCU_TYPE_USB, URE_RX_THR_HIGH); ure_write_4(un, URE_USB_TX_DMA, URE_MCU_TYPE_USB, URE_TEST_MODE_DISABLE | URE_TX_SIZE_ADJUST1); } static void ure_rtl8153_init(struct usbnet *un) { uint16_t val; uint8_t u1u2[8]; int i; /* Disable ALDPS. */ ure_ocp_reg_write(un, URE_OCP_POWER_CFG, ure_ocp_reg_read(un, URE_OCP_POWER_CFG) & ~URE_EN_ALDPS); usbd_delay_ms(un->un_udev, 20); memset(u1u2, 0x00, sizeof(u1u2)); ure_write_mem(un, URE_USB_TOLERANCE, URE_MCU_TYPE_USB | URE_BYTE_EN_SIX_BYTES, u1u2, sizeof(u1u2)); for (i = 0; i < URE_TIMEOUT; i++) { if (usbnet_isdying(un)) return; if (ure_read_2(un, URE_PLA_BOOT_CTRL, URE_MCU_TYPE_PLA) & URE_AUTOLOAD_DONE) break; usbd_delay_ms(un->un_udev, 10); } if (i == URE_TIMEOUT) URE_PRINTF(un, "timeout waiting for chip autoload\n"); for (i = 0; i < URE_TIMEOUT; i++) { if (usbnet_isdying(un)) return; val = ure_ocp_reg_read(un, URE_OCP_PHY_STATUS) & URE_PHY_STAT_MASK; if (val == URE_PHY_STAT_LAN_ON || val == URE_PHY_STAT_PWRDN) break; usbd_delay_ms(un->un_udev, 10); } if (i == URE_TIMEOUT) URE_PRINTF(un, "timeout waiting for phy to stabilize\n"); ure_write_2(un, URE_USB_U2P3_CTRL, URE_MCU_TYPE_USB, ure_read_2(un, URE_USB_U2P3_CTRL, URE_MCU_TYPE_USB) & ~URE_U2P3_ENABLE); if (un->un_flags & URE_FLAG_VER_5C10) { val = ure_read_2(un, URE_USB_SSPHYLINK2, URE_MCU_TYPE_USB); val &= ~URE_PWD_DN_SCALE_MASK; val |= URE_PWD_DN_SCALE(96); ure_write_2(un, URE_USB_SSPHYLINK2, URE_MCU_TYPE_USB, val); ure_write_1(un, URE_USB_USB2PHY, URE_MCU_TYPE_USB, ure_read_1(un, URE_USB_USB2PHY, URE_MCU_TYPE_USB) | URE_USB2PHY_L1 | URE_USB2PHY_SUSPEND); } else if (un->un_flags & URE_FLAG_VER_5C20) { ure_write_1(un, URE_PLA_DMY_REG0, URE_MCU_TYPE_PLA, ure_read_1(un, URE_PLA_DMY_REG0, URE_MCU_TYPE_PLA) & ~URE_ECM_ALDPS); } if (un->un_flags & (URE_FLAG_VER_5C20 | URE_FLAG_VER_5C30)) { val = ure_read_1(un, URE_USB_CSR_DUMMY1, URE_MCU_TYPE_USB); if (ure_read_2(un, URE_USB_BURST_SIZE, URE_MCU_TYPE_USB) == 0) val &= ~URE_DYNAMIC_BURST; else val |= URE_DYNAMIC_BURST; ure_write_1(un, URE_USB_CSR_DUMMY1, URE_MCU_TYPE_USB, val); } ure_write_1(un, URE_USB_CSR_DUMMY2, URE_MCU_TYPE_USB, ure_read_1(un, URE_USB_CSR_DUMMY2, URE_MCU_TYPE_USB) | URE_EP4_FULL_FC); ure_write_2(un, URE_USB_WDT11_CTRL, URE_MCU_TYPE_USB, ure_read_2(un, URE_USB_WDT11_CTRL, URE_MCU_TYPE_USB) & ~URE_TIMER11_EN); ure_write_2(un, URE_PLA_LED_FEATURE, URE_MCU_TYPE_PLA, ure_read_2(un, URE_PLA_LED_FEATURE, URE_MCU_TYPE_PLA) & ~URE_LED_MODE_MASK); if ((un->un_flags & URE_FLAG_VER_5C10) && un->un_udev->ud_speed != USB_SPEED_SUPER) val = URE_LPM_TIMER_500MS; else val = URE_LPM_TIMER_500US; ure_write_1(un, URE_USB_LPM_CTRL, URE_MCU_TYPE_USB, val | URE_FIFO_EMPTY_1FB | URE_ROK_EXIT_LPM); val = ure_read_2(un, URE_USB_AFE_CTRL2, URE_MCU_TYPE_USB); val &= ~URE_SEN_VAL_MASK; val |= URE_SEN_VAL_NORMAL | URE_SEL_RXIDLE; ure_write_2(un, URE_USB_AFE_CTRL2, URE_MCU_TYPE_USB, val); ure_write_2(un, URE_USB_CONNECT_TIMER, URE_MCU_TYPE_USB, 0x0001); ure_write_2(un, URE_USB_POWER_CUT, URE_MCU_TYPE_USB, ure_read_2(un, URE_USB_POWER_CUT, URE_MCU_TYPE_USB) & ~(URE_PWR_EN | URE_PHASE2_EN)); ure_write_2(un, URE_USB_MISC_0, URE_MCU_TYPE_USB, ure_read_2(un, URE_USB_MISC_0, URE_MCU_TYPE_USB) & ~URE_PCUT_STATUS); memset(u1u2, 0xff, sizeof(u1u2)); ure_write_mem(un, URE_USB_TOLERANCE, URE_MCU_TYPE_USB | URE_BYTE_EN_SIX_BYTES, u1u2, sizeof(u1u2)); ure_write_2(un, URE_PLA_MAC_PWR_CTRL, URE_MCU_TYPE_PLA, URE_ALDPS_SPDWN_RATIO); ure_write_2(un, URE_PLA_MAC_PWR_CTRL2, URE_MCU_TYPE_PLA, URE_EEE_SPDWN_RATIO); ure_write_2(un, URE_PLA_MAC_PWR_CTRL3, URE_MCU_TYPE_PLA, URE_PKT_AVAIL_SPDWN_EN | URE_SUSPEND_SPDWN_EN | URE_U1U2_SPDWN_EN | URE_L1_SPDWN_EN); ure_write_2(un, URE_PLA_MAC_PWR_CTRL4, URE_MCU_TYPE_PLA, URE_PWRSAVE_SPDWN_EN | URE_RXDV_SPDWN_EN | URE_TX10MIDLE_EN | URE_TP100_SPDWN_EN | URE_TP500_SPDWN_EN | URE_TP1000_SPDWN_EN | URE_EEE_SPDWN_EN); val = ure_read_2(un, URE_USB_U2P3_CTRL, URE_MCU_TYPE_USB); if (!(un->un_flags & (URE_FLAG_VER_5C00 | URE_FLAG_VER_5C10))) val |= URE_U2P3_ENABLE; else val &= ~URE_U2P3_ENABLE; ure_write_2(un, URE_USB_U2P3_CTRL, URE_MCU_TYPE_USB, val); memset(u1u2, 0x00, sizeof(u1u2)); ure_write_mem(un, URE_USB_TOLERANCE, URE_MCU_TYPE_USB | URE_BYTE_EN_SIX_BYTES, u1u2, sizeof(u1u2)); /* Disable ALDPS. */ ure_ocp_reg_write(un, URE_OCP_POWER_CFG, ure_ocp_reg_read(un, URE_OCP_POWER_CFG) & ~URE_EN_ALDPS); usbd_delay_ms(un->un_udev, 20); ure_init_fifo(un); /* Enable Rx aggregation. */ ure_write_2(un, URE_USB_USB_CTRL, URE_MCU_TYPE_USB, ure_read_2(un, URE_USB_USB_CTRL, URE_MCU_TYPE_USB) & ~URE_RX_AGG_DISABLE); val = ure_read_2(un, URE_USB_U2P3_CTRL, URE_MCU_TYPE_USB); if (!(un->un_flags & (URE_FLAG_VER_5C00 | URE_FLAG_VER_5C10))) val |= URE_U2P3_ENABLE; else val &= ~URE_U2P3_ENABLE; ure_write_2(un, URE_USB_U2P3_CTRL, URE_MCU_TYPE_USB, val); memset(u1u2, 0xff, sizeof(u1u2)); ure_write_mem(un, URE_USB_TOLERANCE, URE_MCU_TYPE_USB | URE_BYTE_EN_SIX_BYTES, u1u2, sizeof(u1u2)); } static void ure_disable_teredo(struct usbnet *un) { ure_write_4(un, URE_PLA_TEREDO_CFG, URE_MCU_TYPE_PLA, ure_read_4(un, URE_PLA_TEREDO_CFG, URE_MCU_TYPE_PLA) & ~(URE_TEREDO_SEL | URE_TEREDO_RS_EVENT_MASK | URE_OOB_TEREDO_EN)); ure_write_2(un, URE_PLA_WDT6_CTRL, URE_MCU_TYPE_PLA, URE_WDT6_SET_MODE); ure_write_2(un, URE_PLA_REALWOW_TIMER, URE_MCU_TYPE_PLA, 0); ure_write_4(un, URE_PLA_TEREDO_TIMER, URE_MCU_TYPE_PLA, 0); } static void ure_init_fifo(struct usbnet *un) { uint32_t rxmode, rx_fifo1, rx_fifo2; int i; ure_write_2(un, URE_PLA_MISC_1, URE_MCU_TYPE_PLA, ure_read_2(un, URE_PLA_MISC_1, URE_MCU_TYPE_PLA) | URE_RXDY_GATED_EN); ure_disable_teredo(un); rxmode = ure_read_4(un, URE_PLA_RCR, URE_MCU_TYPE_PLA); rxmode &= ~URE_RCR_ACPT_ALL; rxmode |= URE_RCR_APM | URE_RCR_AB; /* accept my own DA and bcast */ ure_write_4(un, URE_PLA_RCR, URE_MCU_TYPE_PLA, rxmode); if (!(un->un_flags & URE_FLAG_8152)) { if (un->un_flags & (URE_FLAG_VER_5C00 | URE_FLAG_VER_5C10 | URE_FLAG_VER_5C20)) ure_ocp_reg_write(un, URE_OCP_ADC_CFG, URE_CKADSEL_L | URE_ADC_EN | URE_EN_EMI_L); if (un->un_flags & URE_FLAG_VER_5C00) ure_ocp_reg_write(un, URE_OCP_EEE_CFG, ure_ocp_reg_read(un, URE_OCP_EEE_CFG) & ~URE_CTAP_SHORT_EN); ure_ocp_reg_write(un, URE_OCP_POWER_CFG, ure_ocp_reg_read(un, URE_OCP_POWER_CFG) | URE_EEE_CLKDIV_EN); ure_ocp_reg_write(un, URE_OCP_DOWN_SPEED, ure_ocp_reg_read(un, URE_OCP_DOWN_SPEED) | URE_EN_10M_BGOFF); ure_ocp_reg_write(un, URE_OCP_POWER_CFG, ure_ocp_reg_read(un, URE_OCP_POWER_CFG) | URE_EN_10M_PLLOFF); ure_ocp_reg_write(un, URE_OCP_SRAM_ADDR, URE_SRAM_IMPEDANCE); ure_ocp_reg_write(un, URE_OCP_SRAM_DATA, 0x0b13); ure_write_2(un, URE_PLA_PHY_PWR, URE_MCU_TYPE_PLA, ure_read_2(un, URE_PLA_PHY_PWR, URE_MCU_TYPE_PLA) | URE_PFM_PWM_SWITCH); /* Enable LPF corner auto tune. */ ure_ocp_reg_write(un, URE_OCP_SRAM_ADDR, URE_SRAM_LPF_CFG); ure_ocp_reg_write(un, URE_OCP_SRAM_DATA, 0xf70f); /* Adjust 10M amplitude. */ ure_ocp_reg_write(un, URE_OCP_SRAM_ADDR, URE_SRAM_10M_AMP1); ure_ocp_reg_write(un, URE_OCP_SRAM_DATA, 0x00af); ure_ocp_reg_write(un, URE_OCP_SRAM_ADDR, URE_SRAM_10M_AMP2); ure_ocp_reg_write(un, URE_OCP_SRAM_DATA, 0x0208); } ure_reset(un); ure_write_1(un, URE_PLA_CR, URE_MCU_TYPE_PLA, 0); ure_write_1(un, URE_PLA_OOB_CTRL, URE_MCU_TYPE_PLA, ure_read_1(un, URE_PLA_OOB_CTRL, URE_MCU_TYPE_PLA) & ~URE_NOW_IS_OOB); ure_write_2(un, URE_PLA_SFF_STS_7, URE_MCU_TYPE_PLA, ure_read_2(un, URE_PLA_SFF_STS_7, URE_MCU_TYPE_PLA) & ~URE_MCU_BORW_EN); for (i = 0; i < URE_TIMEOUT; i++) { if (usbnet_isdying(un)) return; if (ure_read_1(un, URE_PLA_OOB_CTRL, URE_MCU_TYPE_PLA) & URE_LINK_LIST_READY) break; usbd_delay_ms(un->un_udev, 10); } if (i == URE_TIMEOUT) URE_PRINTF(un, "timeout waiting for OOB control\n"); ure_write_2(un, URE_PLA_SFF_STS_7, URE_MCU_TYPE_PLA, ure_read_2(un, URE_PLA_SFF_STS_7, URE_MCU_TYPE_PLA) | URE_RE_INIT_LL); for (i = 0; i < URE_TIMEOUT; i++) { if (usbnet_isdying(un)) return; if (ure_read_1(un, URE_PLA_OOB_CTRL, URE_MCU_TYPE_PLA) & URE_LINK_LIST_READY) break; usbd_delay_ms(un->un_udev, 10); } if (i == URE_TIMEOUT) URE_PRINTF(un, "timeout waiting for OOB control\n"); ure_write_2(un, URE_PLA_CPCR, URE_MCU_TYPE_PLA, ure_read_2(un, URE_PLA_CPCR, URE_MCU_TYPE_PLA) & ~URE_CPCR_RX_VLAN); ure_write_2(un, URE_PLA_TCR0, URE_MCU_TYPE_PLA, ure_read_2(un, URE_PLA_TCR0, URE_MCU_TYPE_PLA) | URE_TCR0_AUTO_FIFO); /* Configure Rx FIFO threshold and coalescing. */ ure_write_4(un, URE_PLA_RXFIFO_CTRL0, URE_MCU_TYPE_PLA, URE_RXFIFO_THR1_NORMAL); if (un->un_udev->ud_speed == USB_SPEED_FULL) { rx_fifo1 = URE_RXFIFO_THR2_FULL; rx_fifo2 = URE_RXFIFO_THR3_FULL; } else { rx_fifo1 = URE_RXFIFO_THR2_HIGH; rx_fifo2 = URE_RXFIFO_THR3_HIGH; } ure_write_4(un, URE_PLA_RXFIFO_CTRL1, URE_MCU_TYPE_PLA, rx_fifo1); ure_write_4(un, URE_PLA_RXFIFO_CTRL2, URE_MCU_TYPE_PLA, rx_fifo2); /* Configure Tx FIFO threshold. */ ure_write_4(un, URE_PLA_TXFIFO_CTRL, URE_MCU_TYPE_PLA, URE_TXFIFO_THR_NORMAL); } static int ure_match(device_t parent, cfdata_t match, void *aux) { struct usb_attach_arg *uaa = aux; return usb_lookup(ure_devs, uaa->uaa_vendor, uaa->uaa_product) != NULL ? UMATCH_VENDOR_PRODUCT : UMATCH_NONE; } static void ure_attach(device_t parent, device_t self, void *aux) { USBNET_MII_DECL_DEFAULT(unm); struct usbnet * const un = device_private(self); struct usb_attach_arg *uaa = aux; struct usbd_device *dev = uaa->uaa_device; usb_interface_descriptor_t *id; usb_endpoint_descriptor_t *ed; int error, i; uint16_t ver; uint8_t eaddr[8]; /* 2byte padded */ char *devinfop; uint32_t maclo, machi; aprint_naive("\n"); aprint_normal("\n"); devinfop = usbd_devinfo_alloc(dev, 0); aprint_normal_dev(self, "%s\n", devinfop); usbd_devinfo_free(devinfop); un->un_dev = self; un->un_udev = dev; un->un_sc = un; un->un_ops = &ure_ops; un->un_rx_xfer_flags = USBD_SHORT_XFER_OK; un->un_tx_xfer_flags = USBD_FORCE_SHORT_XFER; un->un_rx_list_cnt = URE_RX_LIST_CNT; un->un_tx_list_cnt = URE_TX_LIST_CNT; un->un_rx_bufsz = URE_BUFSZ; un->un_tx_bufsz = URE_BUFSZ; #define URE_CONFIG_NO 1 /* XXX */ error = usbd_set_config_no(dev, URE_CONFIG_NO, 1); if (error) { aprint_error_dev(self, "failed to set configuration: %s\n", usbd_errstr(error)); return; /* XXX */ } if (uaa->uaa_product == USB_PRODUCT_REALTEK_RTL8152) un->un_flags |= URE_FLAG_8152; #define URE_IFACE_IDX 0 /* XXX */ error = usbd_device2interface_handle(dev, URE_IFACE_IDX, &un->un_iface); if (error) { aprint_error_dev(self, "failed to get interface handle: %s\n", usbd_errstr(error)); return; /* XXX */ } id = usbd_get_interface_descriptor(un->un_iface); for (i = 0; i < id->bNumEndpoints; i++) { ed = usbd_interface2endpoint_descriptor(un->un_iface, i); if (ed == NULL) { aprint_error_dev(self, "couldn't get ep %d\n", i); return; /* XXX */ } if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN && UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) { un->un_ed[USBNET_ENDPT_RX] = ed->bEndpointAddress; } else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT && UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) { un->un_ed[USBNET_ENDPT_TX] = ed->bEndpointAddress; } } /* Set these up now for ure_ctl(). */ usbnet_attach(un); un->un_phyno = 0; ver = ure_read_2(un, URE_PLA_TCR1, URE_MCU_TYPE_PLA) & URE_VERSION_MASK; switch (ver) { case 0x4c00: un->un_flags |= URE_FLAG_VER_4C00; break; case 0x4c10: un->un_flags |= URE_FLAG_VER_4C10; break; case 0x5c00: un->un_flags |= URE_FLAG_VER_5C00; break; case 0x5c10: un->un_flags |= URE_FLAG_VER_5C10; break; case 0x5c20: un->un_flags |= URE_FLAG_VER_5C20; break; case 0x5c30: un->un_flags |= URE_FLAG_VER_5C30; break; default: /* fake addr? or just fail? */ break; } aprint_normal_dev(self, "RTL%d %sver %04x\n", (un->un_flags & URE_FLAG_8152) ? 8152 : 8153, (un->un_flags != 0) ? "" : "unknown ", ver); if (un->un_flags & URE_FLAG_8152) ure_rtl8152_init(un); else ure_rtl8153_init(un); if ((un->un_flags & URE_FLAG_VER_4C00) || (un->un_flags & URE_FLAG_VER_4C10)) ure_read_mem(un, URE_PLA_IDR, URE_MCU_TYPE_PLA, eaddr, sizeof(eaddr)); else ure_read_mem(un, URE_PLA_BACKUP, URE_MCU_TYPE_PLA, eaddr, sizeof(eaddr)); if (ETHER_IS_ZERO(eaddr)) { maclo = 0x00f2 | (cprng_strong32() & 0xffff0000); machi = cprng_strong32() & 0xffff; eaddr[0] = maclo & 0xff; eaddr[1] = (maclo >> 8) & 0xff; eaddr[2] = (maclo >> 16) & 0xff; eaddr[3] = (maclo >> 24) & 0xff; eaddr[4] = machi & 0xff; eaddr[5] = (machi >> 8) & 0xff; } memcpy(un->un_eaddr, eaddr, sizeof(un->un_eaddr)); struct ifnet *ifp = usbnet_ifp(un); /* * We don't support TSOv4 and v6 for now, that are required to * be handled in software for some cases. */ ifp->if_capabilities = IFCAP_CSUM_IPv4_Tx | IFCAP_CSUM_TCPv4_Tx | IFCAP_CSUM_UDPv4_Tx; #ifdef INET6 ifp->if_capabilities |= IFCAP_CSUM_TCPv6_Tx | IFCAP_CSUM_UDPv6_Tx; #endif if (un->un_flags & ~URE_FLAG_VER_4C00) { ifp->if_capabilities |= IFCAP_CSUM_IPv4_Rx | IFCAP_CSUM_TCPv4_Rx | IFCAP_CSUM_UDPv4_Rx | IFCAP_CSUM_TCPv6_Rx | IFCAP_CSUM_UDPv6_Rx; } struct ethercom *ec = usbnet_ec(un); ec->ec_capabilities = ETHERCAP_VLAN_MTU; #ifdef notyet ec->ec_capabilities |= ETHERCAP_JUMBO_MTU; #endif unm.un_mii_phyloc = un->un_phyno; usbnet_attach_ifp(un, IFF_SIMPLEX | IFF_BROADCAST | IFF_MULTICAST, 0, &unm); } static void ure_uno_rx_loop(struct usbnet *un, struct usbnet_chain *c, uint32_t total_len) { struct ifnet *ifp = usbnet_ifp(un); uint8_t *buf = c->unc_buf; uint16_t pkt_len = 0; uint16_t pkt_count = 0; struct ure_rxpkt rxhdr; do { if (total_len < sizeof(rxhdr)) { DPRINTF(("too few bytes left for a packet header\n")); if_statinc(ifp, if_ierrors); return; } buf += roundup(pkt_len, 8); memcpy(&rxhdr, buf, sizeof(rxhdr)); total_len -= sizeof(rxhdr); pkt_len = le32toh(rxhdr.ure_pktlen) & URE_RXPKT_LEN_MASK; DPRINTFN(4, ("next packet is %d bytes\n", pkt_len)); if (pkt_len > total_len) { DPRINTF(("not enough bytes left for next packet\n")); if_statinc(ifp, if_ierrors); return; } total_len -= roundup(pkt_len, 8); buf += sizeof(rxhdr); usbnet_enqueue(un, buf, pkt_len - ETHER_CRC_LEN, ure_rxcsum(ifp, &rxhdr), 0, 0); pkt_count++; } while (total_len > 0); if (pkt_count) rnd_add_uint32(usbnet_rndsrc(un), pkt_count); } static int ure_rxcsum(struct ifnet *ifp, struct ure_rxpkt *rp) { int enabled = ifp->if_csum_flags_rx, flags = 0; uint32_t csum, misc; if (enabled == 0) return 0; csum = le32toh(rp->ure_csum); misc = le32toh(rp->ure_misc); if (csum & URE_RXPKT_IPV4_CS) { flags |= M_CSUM_IPv4; if (csum & URE_RXPKT_TCP_CS) flags |= M_CSUM_TCPv4; if (csum & URE_RXPKT_UDP_CS) flags |= M_CSUM_UDPv4; } else if (csum & URE_RXPKT_IPV6_CS) { flags = 0; if (csum & URE_RXPKT_TCP_CS) flags |= M_CSUM_TCPv6; if (csum & URE_RXPKT_UDP_CS) flags |= M_CSUM_UDPv6; } flags &= enabled; if (__predict_false((flags & M_CSUM_IPv4) && (misc & URE_RXPKT_IP_F))) flags |= M_CSUM_IPv4_BAD; if (__predict_false( ((flags & (M_CSUM_TCPv4 | M_CSUM_TCPv6)) && (misc & URE_RXPKT_TCP_F)) || ((flags & (M_CSUM_UDPv4 | M_CSUM_UDPv6)) && (misc & URE_RXPKT_UDP_F)) )) flags |= M_CSUM_TCP_UDP_BAD; return flags; } static unsigned ure_uno_tx_prepare(struct usbnet *un, struct mbuf *m, struct usbnet_chain *c) { struct ure_txpkt txhdr; uint32_t frm_len = 0; uint8_t *buf = c->unc_buf; if ((unsigned)m->m_pkthdr.len > un->un_tx_bufsz - sizeof(txhdr)) return 0; /* header */ txhdr.ure_pktlen = htole32(m->m_pkthdr.len | URE_TXPKT_TX_FS | URE_TXPKT_TX_LS); txhdr.ure_csum = htole32(ure_txcsum(m)); memcpy(buf, &txhdr, sizeof(txhdr)); buf += sizeof(txhdr); frm_len = sizeof(txhdr); /* packet */ m_copydata(m, 0, m->m_pkthdr.len, buf); frm_len += m->m_pkthdr.len; DPRINTFN(2, ("tx %d bytes\n", frm_len)); return frm_len; } /* * We need to calculate L4 checksum in software, if the offset of * L4 header is larger than 0x7ff = 2047. */ static uint32_t ure_txcsum(struct mbuf *m) { struct ether_header *eh; int flags = m->m_pkthdr.csum_flags; uint32_t data = m->m_pkthdr.csum_data; uint32_t reg = 0; int l3off, l4off; uint16_t type; if (flags == 0) return 0; if (__predict_true(m->m_len >= (int)sizeof(*eh))) { eh = mtod(m, struct ether_header *); type = eh->ether_type; } else m_copydata(m, offsetof(struct ether_header, ether_type), sizeof(type), &type); switch (type = htons(type)) { case ETHERTYPE_IP: case ETHERTYPE_IPV6: l3off = ETHER_HDR_LEN; break; case ETHERTYPE_VLAN: l3off = ETHER_HDR_LEN + ETHER_VLAN_ENCAP_LEN; break; default: return 0; } if (flags & (M_CSUM_TCPv4 | M_CSUM_UDPv4)) { l4off = l3off + M_CSUM_DATA_IPv4_IPHL(data); if (__predict_false(l4off > URE_L4_OFFSET_MAX)) { in_undefer_cksum(m, l3off, flags); return 0; } reg |= URE_TXPKT_IPV4_CS; if (flags & M_CSUM_TCPv4) reg |= URE_TXPKT_TCP_CS; else reg |= URE_TXPKT_UDP_CS; reg |= l4off << URE_L4_OFFSET_SHIFT; } #ifdef INET6 else if (flags & (M_CSUM_TCPv6 | M_CSUM_UDPv6)) { l4off = l3off + M_CSUM_DATA_IPv6_IPHL(data); if (__predict_false(l4off > URE_L4_OFFSET_MAX)) { in6_undefer_cksum(m, l3off, flags); return 0; } reg |= URE_TXPKT_IPV6_CS; if (flags & M_CSUM_TCPv6) reg |= URE_TXPKT_TCP_CS; else reg |= URE_TXPKT_UDP_CS; reg |= l4off << URE_L4_OFFSET_SHIFT; } #endif else if (flags & M_CSUM_IPv4) reg |= URE_TXPKT_IPV4_CS; return reg; } #ifdef _MODULE #include "ioconf.c" #endif USBNET_MODULE(ure)