C-Kermit UNIX Platforms
C-Kermit has been built and tested successfully on 16-bit, 32-bit, and 64-bit
architectures under portable UNIX versions including 4.2, 4.3, and 4.4BSD,
AT&T UNIX System V Releases 3 and 4; and POSIX versions. C-Kermit 8.0 or
earlier versions (in most cases, 6.0 or later) have been successfully built
and tested on at least the following specific UNIX platforms:
- Acorn RISCiX
- Alliant FX/8 with Concentrix 4.1
- Altos 486, 586, or 986 with XENIX 3.0
- Altos ACS68000 with UNIX System III R2
- Amdahl mainframes with UTS 2.4 and UTSV 5.2.6b
- Amdahl mainframes with UNIX System V R5.2.6
- Apollo workstations with Aegis 9.7 and with DomainOS SR10.0 and 10.4
- Apple Macintosh with A/UX
- Apple Power Macintosh with Mac OS/X 1.0 thru 10.2
- Apple Power Macintosh with Debian Linux
- Apple Power Macintosh with MkLinux
- Apple Power Macintosh with LinuxPPP
- Apple Powerbook with MachTen 2.1.1.D
- AT&T System III
- AT&T 3B2 and 3B20 systems with UNIX System V R2 and R3
- AT&T 6300 PLUS with UNIX System V R2
- AT&T 6386 WGS UNIX PC with UNIX System V/386 3.2
- AT&T PC 7300 UNIXPC (3B1) System V R3.51m
- Atari Falcon with MiNT
- Atari ST with MINIX ST 1.5
- BeBox with BeOS DR7 and BeOS 4.5
- Bull DPX/2 with BOS/X
- Bull Escala and other RS/6000 compatibles with AIX
- Charles River Data Systems Universe with UNOS 9.2
- Commodore Amiga with UNIX System V R4
- Commodore Amiga with MINIX 1.5.10
- Concurrent (Masscomp) computers with RTU 4.0 through 6.0
- Convergent Technologies MiniFrame with CTIX System V R3
- Convex C1 and C2 with Convex/OS 8.x and 9.x
- Convex 3240, C220, and C240 with ConvexOS V10.x
- Cray supercomputers with UNICOS 6.1 through 8.0 and with CSOS 1.0
- DEC Alpha, DECstation, and or PC with with OSF/1 versions 1 through 3
- DEC Alpha with Digital UNIX 3.2 through 4.0D
- DEC Alpha with Compaq Tru64 UNIX 4.0E through 5.1
- DEC Alpha with Linux (Debian, Red Hat, SuSE)
- DEC Alpha with FreeBSD, NetBSD
- DEC PDP-11 with 2.4, 2.9, 2.10, and 2.11 BSD
- DEC VAX with 4.1BSD, 4.2BSD, 4.3BSD, 4.3BSD-Reno, 4.3BSD-Networking/2
- DEC VAX with AT&T Bell Labs UNIX 7th Edition
- DEC VAX with AT&T Bell Labs Research UNIX 10th Edition
- DEC VAX with AT&T System V R3
- DEC VAX with ULTRIX 1.0, 2.0, 3.0, and 4.x
- DECstation with Berkeley Sprite
- DECstation with MACH 2.6
- DECstation with NetBSD
- DECstation with ULTRIX 4.2 through 4.5
- Data General AViiON 88K with DG/UX 4.3 through 5.4R4.11
- DIAB DS90 with DNIX 5.2 and 5.3
- Dolphin Server Technology Triton 88/17 with Dolphin UNIX System V/88 R3.2
- Encore Multimax with UMAX 4.3
- Encore 88K with UMAX V 5.2
- Fortune 32:16 with For:Pro 2.1
- FPS 500 with FPX 4.1
- Harris HCX-2900
- Harris Night Hawk 68K and 88K with CX/UX
- HP-9000 with 4.4BSD
- HP-9000 with HP-UX 5.00 through 11.20
- HP-9000 with Trusted HP-UX 10.xx and 11.xx
- HP-9000 PA-RISC with NeXTSTEP/Mach 3.3
- HP-9000 PA-RISC with OPENSTEP/Mach 4.1
- HP-9000 PA-RISC with Debian Linux 3.0
- HP-9000 PA-RISC with FTX 3.x
- IA64 (Itanium) with HP-UX 11.20, Red Hat Linux, SuSE Linux
- IBM 370-series mainframes with AIX/370 1.2
- IBM 370-series mainframes with AIX/ESA 2.1
- IBM 390-series mainframes with Linux/S390 and SuSE Linux
- IBM PS/2 with AIX 1.0 - 1.2.1
- IBM RS/6000 and Power Series with AIX 3.0 through 5.1
- IBM RT PC with AIX 2.x, ACIS 4.x, AOS/4.3BSD-Reno
- ICL DRS400 and 400E with System V R3
- ICL DRS3000 and DRS6000 with DRS/NX UNIX System V R4;
- Integrated Solutions VS8 with ISI 4.2BSD
- Intel 302 with Bell Tech System V/386 R3.2
- Intergraph Clipper with CLIX 3.x
- Luxor ABC-9000 with DNIX
- MIPS Computer Systems with RISC/os UMIPS 4.52
- Modcomp Realstar 1000 with Real/IX D.1
- Motorola Four Phase
- Motorola VME Delta Series with System V/68 R3
- Motorola VME Delta Series with System V/88 R32 and R40
- Motorola 680x0 with Debian Linux
- Motorola 680x0 with NetBSD
- NCR Tower 1632 with System V R2
- NCR Tower 32 with OS 1.x-2.x
- NCR System 3000 and MP-RAS with System V R4
- NeXT workstations with NeXTSTEP/Mach 1.0 through 3.3
- NeXT workstations with OPENSTEP/Mach 4.1 and 4.2
- Nixdorf Targon/31 M15 with TOS 4.0.13
- Norsk Data Uniline 88/17 with System V/88 R3.2
- OkiStation 7300 Series with System V R4
- Olivetti CP 486 with UNIX System V R4
- Olivetti LSX 3005 through 3045 with X/OS UNIX 2.3 through 3.0;
- Olivetti LSX 5020 with SCO UNIX 3.2.2
- PCs with 386BSD (Jolix)
- PCs with AT&T UNIX System V R3.2
- PCs with BeOS 4.5
- PCs with BSDI/386 1.0-4.1
- PCs with Dell UNIX System V/386 R4.04 issue 2.2
- PCs with DG/UX 5.40-5.4R4.20
- PCs with ESIX System V R3 and R4
- PCs with FreeBSD 1.0 through 4.6
- PCs with Interactive Systems Corporation System III PC/IX
- PCs with Interactive Systems Corporation 386/ix 1.x and 2.x
- PCs with Interactive Systems Corporation System V/386 R3.2 V2.2-4.1.1
- PCs with Linux (Debian, Red Hat, Slackware, Caldera, SuSE, Mandrake,
Turbo, VA, etc)
- PCs with Lynx/386
- PCs with Mark Williams COHERENT/386 4.0 and 4.2
- PCs with MINIX/386
- PCs with Microport SV/AT System V R2
- PCs with Microport 3.0U3 and SVR4.0 V2.2-4.1
- PCs with Mt Xinu Mach386
- PCs with NCR MP-RAS 2.03 and 3.02
- PCs with NetBSD 1.0 through 1.6
- PCs with Neutrino 2+
- PCs with NeXTSTEP/486
- PCs with OpenBSD 2.3 through 3.0
- PCs with OPENSTEP/Mach 4.1 and 4.2
- PCs with QNX 4.0 through 6.1
- PCs with SCO ODT 1.1 through 3.0
- PCs with SCO Open Server R5.0.0 through 5.0.6a
- PCs with SCO Open UNIX 8.0.0 and 8.0.1
- PCs with SCO UNIX/386 3.2v4.0 and 4.2
- PCs with SCO Xenix/286 2.3.3
- PCs with SCO Xenix/386 2.2.x through 2.3.4
- PCs with Sequent DYNIX/ptx 2.16-4.4.2
- PCs with SINIX-L 5.41-5.42
- PCs with Sun Solaris 1.0 through Solaris 8
- PCs with Trusted Xenix
- PCs with UnixWare 1.0 through 7.1.0
- PCs with Versyss System V R3
- Perkin-Elmer 3200 series with AT&T Bell Labs UNIX V7
- Perkin-Elmer 3200 series with AT&T System V R3
- Perkin-Elmer 3200 series with Xelos R02
- PFU Compact A Series SX/A TISP V10/E50
- Plan 9 from Bell Labs on Intel, MIPS, SPARC, and 680x0
- Prime EXL7000 or 8000 MIPS RISC/os 4.52
- Pyramid MIS T Series with OSx 4.4 through 5.1a
- Pyramid MIS S and ES Series with DataCenter/OSx
- Sequent Balance or Symmetry with DYNIX 3.x and DYNIX/ptx 1.3, 1.4, and 4.0
- Siemens Nixdorf RM x00 (MIPS) with SINIX 5.41-5.42
- Siemens Nixdorf RM x00 (MIPS) with Reliant 5.43-5.44
- Silicon Graphics IRIX 3.3 through 6.5.1
- Sharp Zaurus SL-5500 Linux
- Solbourne 5E/900 with OS/MP 4.1A
- Sony NEWS with NEWS-OS 4.x
- Sperry 5000 with UTS V and System V R3
- Stardent 1520 UNIX System V R3 2.2
- Stratus Continuum with FTX 2.x through 3.1
- Sun computers with SunOS 3.2 through 4.1.4
- Sun computers with Solaris 1.0 through Solaris 9
- Sun SPARC with Linux (Debian, Red Hat, SuSE)
- Sun SPARC with NeXTSTEP/Mach 3.3
- Sun SPARC with OPENSTEP/Mach 4.1, 4.2
- Sun SPARC with Plan 9 from Bell Labs
- Tandy Model 6000 with XENIX 3.2
- Tektronix 6130 with UTek OS
- UNISYS 640 with CTIX SVR3.2 5.3
- UNISYS S/4040 with CTIX SVR3.2
- UNISYS U6000/65 MP with UNIX System V R4
The latest version of C-Kermit is not necessarily available for all of these
platforms, many of which are no longer available to us, but source code and
(in many cases) binaries are available for previous C-Kermit releases to cover
all the platforms listed above.
C-Kermit / Columbia University / kermit@columbia.edu / October 2002