# /usr/libexec/src2pkg/DEFINES
## src2pkg - Copyright 2005-2012 Gilbert Ashley <amigo@ibilio.org>
## src2pkg is free software released under the GNU General Public License Version 2

# This file defines some of the variables for src2pkg which, in some cases,
#  a user might want or need to edit to change basic default behaviours of src2pkg.
# The syntax used in this file defines variables in such a way 
# that they can still be overridden when needed.  ! [[ $VAR ]] && VAR=VALUE
# means if VAR is not given then set VAR to VALUE. Doing it this way still lets you
# override the defaults for any package which needs it.
# This syntax is what allows you to pass command-line arguments or script
# commands which override these defaults. Once given like this: VAR=VALUE
# the VAR will always be VALUE, unless explicitly overridden later.
# Still, the best place to set any such variables is in your configuration file
# in /etc/src2pkg/src2pkg.conf The src2pkg.conf file is not overwritten when
# you upgrade to a newer version of src2pkg, so your changes will not be lost.
# It is also not removed if you uninstall srcpkg.
# This DEFINES file *is* overwritten if you upgrade and will be removed if
# you uninstall src2pkg. Please use the conf file for any changes you want to make,
# but use the same syntax as found in this file for maximum flexibility.
# The src2pkg.conf file contains helpful notes to guide you in setting up any
# variable which you might normally want or need to change.

#####------------------ src2pkg Defaults --------------------------#####

! [[ $QUIET = "NO" ]] && QUIET="YES"
! [[ $COLOR_PROMPT = "NO" ]] && COLOR_PROMPT="YES"

# This replaces CREATOR and is the default signature in slack-desc(PKG_DESC)
# and gets written to the 11th line of the file.
! [[ $PACKAGER ]] && PACKAGER="src2pkg"
! [[ $SIGNATURE ]] && SIGNATURE="Packaged by $PACKAGER"
[[ $SIGNATURE ]] && BLURB_11="$SIGNATURE"
! [[ $BLURB_11 ]] && BLURB_11="Packaged by src2pkg"

# SIG is a suffix to BUILD for signing packages
! [[ $SIG ]] && SIG=""

# Don't change things below here unless you really know what you are doing.
# These are the best known 'sane' defaults for building conformant packages.
# By default most sources install to /usr/local, but that's for locally-compiled sources
# which are not packaged.
# Software for packages should install with prefix of  /usr or /opt/pkgname usually.
! [[ $PRE_FIX ]] && PRE_FIX="/usr"

# Here's where the standardized directories can be given, such as --sysconfdir=/etc --localstatedir=/var/lib .
# ! [[ $STD_CONFIGS ]] && STD_CONFIGS="--sysconfdir=/etc --localstatedir=/var/lib "
# We leave this blank to avoid breaking some builds. Add any needed configure options to EXTRA_CONFIGS
# in your src2pkg script -this is just the sort of one-off build requirement that is best  documented there.
! [[ $STD_CONFIGS ]] && STD_CONFIGS=""

# Extra arguments to the compiler, usually architecture specific stuff
# An example for ix86 would be this:"-fomit-frame-pointer" or "-Wall"
# ! [[ $EXTRA_FLAGS ]] && EXTRA_FLAGS="-Wall"
# We leave this blank by default
! [[ $EXTRA_FLAGS ]] && EXTRA_FLAGS=""

# DEFAULT_CONFIG_COMMAND
[[ $DEFAULT_CONFIG_COMMAND ]] || DEFAULT_CONFIG_COMMAND='./configure'
# DEFAULT_ MAKE_COMMAND combine the JOBS variable if it is given
if [[ -z $NUMJOBS ]] ; then
	[[ $DEFAULT_MAKE_COMMAND ]] || DEFAULT_MAKE_COMMAND="$(echo make |white_out)"
else
	[[ $DEFAULT_MAKE_COMMAND ]] || DEFAULT_MAKE_COMMAND="$(echo make -j$NUMJOBS |white_out)"
fi

# Binary and library strip commands
# binaries are not usually sensitive to stripping. "-p --strip-unneeded" should always be safe.
# This:"-p -strip-all" strips even smaller, but is also sometimes risky, especially for libraries.
# It also marks all objects as stripped, even if nothing was stripped. Use with caution
! [[ $BIN_STRIP_COMMAND ]] && BIN_STRIP_COMMAND="strip -p --strip-unneeded"
# --strip-unneeded seems to work fine for most libraries. Use "strip -p --strip-debug" if you have any problems
! [[ $LIB_STRIP_COMMAND ]] && LIB_STRIP_COMMAND="strip -p --strip-unneeded"
# --strip-unneeded seems to work fine for most libraries. Use "strip -p --strip-debug" if you have any problems
! [[ $STATIC_LIB_STRIP_COMMAND ]] && STATIC_LIB_STRIP_COMMAND="strip -p --strip-debug"
# Always stripping seems safe as the default. I've had no problems using the above options.
! [[ $STRIP_BINS ]] && STRIP_BINS="YES"
! [[ $STRIP_LIBS ]]  && STRIP_LIBS="YES"
# If you need to keep libraries unstripped put STRIP_LIBS="NO" in your build script.
# If set to 'YES', STRIP_HARD will strip .note, .comment and .compact_rel sections from libs and bins
# This is set to NO as default as it is only useful where space really needs to be saved -like embedded systems 
! [[ $STRIP_HARD ]] && STRIP_HARD="NO"

# Using bzip2 by default would be alright, but saves little space in this case. gzip is standard.
# Note that using SAVE_SPACE changes this to bzip2
! [[ $MAN_COMPRESS ]] && MAN_COMPRESS="gzip -9"
# These 4 set up a standard build environment that behaves like SlackBuild scripts
! [[ $SOURCES_DIR ]] && SOURCES_DIR=$CWD
# SRC_BUILDS_DIR is the directory where the sources get built
! [[ $SRC_BUILDS_DIR ]] && SRC_BUILDS_DIR="/tmp"
#  PKG_BUILDS_DIR -where packages are pre-installed and assembled
! [[ $PKG_BUILDS_DIR ]] && PKG_BUILDS_DIR="/tmp"
#  PKG_DEST_DIR -where assembled packages are left
! [[ $PKG_DEST_DIR ]] && PKG_DEST_DIR="/tmp"
# libsentry needs a backup path -usually the same as SRC_BUILDS_DIR
! [[ $BACKUP_DIR ]] && BACKUP_DIR="/tmp"
# If you specify KEEP_BACKUPS=YES a .tgz archive is created in:
! [[ $BACKUPS_SAVE_DIR ]] && BACKUPS_SAVE_DIR="/tmp"

## Package corrections preferences
! [[ $CORRECT_NAMES ]] && CORRECT_NAMES="YES"
! [[ $CORRECT_MANS ]] && CORRECT_MANS="YES"
! [[ $CORRECT_DOCS ]] && CORRECT_DOCS="YES"
## CORRECT_USRX11R6
! [[ $CORRECT_USRX11R6 ]] && CORRECT_USRX11R6="YES"
## CORRECT_ICONS
! [[ $CORRECT_ICONS ]] && CORRECT_ICONS="YES"

## even if you use the recommended corrections above, it
#  may be useful to not correct some or all perms (CVS SVN ?) sometimes
! [[ $CORRECT_PERMS ]] && CORRECT_PERMS="YES"
! [[ $CORRECT_SUID_PERMS ]] && CORRECT_SUID_PERMS="YES"

## AUTO_PATCH
! [[ $AUTO_PATCH ]] && AUTO_PATCH="YES"

# set defaults for kiss-linux
# DEPTH and SCRIPT_DIR are used in gen_deps_list_kiss (FUNCTIONS) 
# if [[ -f /etc/kiss-version ]] ; then
# hmm, how is this working with db-root?
if [[ $PKG_FORMAT = 'tpkg' ]] ; then
	[[ $ADM_DIR_NAME ]] || ADM_DIR_NAME=/var/lib/tpkg
	[[ $PKG_POSTINST ]] || PKG_POSTINST="doinst.sh"
	[[ $PKG_PREINST ]] || PKG_PREINST="preinst"
	[[ $PKG_PRERM ]] || PKG_PRERM="prerm"
	[[ $PKG_POSTRM ]] || PKG_POSTRM="postrm"
	[[ $PKG_REQUIRED ]] || PKG_REQUIRED="pkg-required"
	[[ $PKG_PROVIDES ]] || PKG_PROVIDES="pkg-provides"
	[[ $PKG_SUGGESTS ]] || PKG_SUGGESTS="pkg-suggests"
	[[ $PKG_DESC ]] || PKG_DESC="pkg-desc"
	[[ $PKG_META ]] || PKG_META="pkg-meta"
	[[ $PKG_LINKS ]] || PKG_LINKS="pkg-links"
	[[ $DEPTH ]] || DEPTH=6
	[[ $SCRIPT_DIR ]] || SCRIPT_DIR=postinst
else
	DEPTH=5
	SCRIPT_DIR=scripts
fi

# allow some compatibility for other package systems and directory layout schemes
! [[ $ADM_DIR_NAME ]] && ADM_DIR_NAME=/var/log
! [[ $PKG_DESC ]] && PKG_DESC="slack-desc"
! [[ $PKG_REQUIRED ]] && PKG_REQUIRED="slack-required"
! [[ $PKG_PROVIDES ]] && PKG_PROVIDES="slack-provides"
! [[ $PKG_SUGGESTS ]] && PKG_SUGGESTS="slack-suggests"
! [[ $PKG_CONFLICTS ]] && PKG_CONFLICTS="slack-conflicts"
! [[ $INSTALLPKG ]] && INSTALLPKG="internal"
! [[ $ADM_DIR_NAME ]] && ADM_DIR_NAME=/var/log
! [[ $PKG_POSTINST ]] && PKG_POSTINST="doinst.sh"
! [[ $PKG_PREINST ]] && PKG_PREINST="slack-preinst"
! [[ $PKG_PRERM ]] && PKG_PRERM="slack-prerm"
! [[ $PKG_POSTRM ]] && PKG_POSTRM="slack-postrm"
! [[ $PKG_META ]] && PKG_META="slack-meta"
! [[ $PKG_LINKS ]] && PKG_LINKS="slack-links"

if [[ "$PKG_FORMAT" = "pet2" ]] ; then
	PKG_FORMAT=pet PET2=1
fi

# Compression type for final packages 
# If not already specified, try to figure it out
if ! [[ $PKG_FORMAT ]] ; then
	if [[ -f /etc/slackware-version ]] ; then
		DISTRO_VERSION=$(cat /etc/slackware-version |cut -f2 -d ' ' |cut -f1 -d '.')
		if [[ $DISTRO_VERSION -lt 13 ]] ; then
			PKG_FORMAT=tgz
		else
			PKG_FORMAT=txz
		fi
	elif [[ -f /etc/vector-version ]] ; then
		PKG_FORMAT=tbz
	elif [[ -f /etc/zenwalk-version ]] || [[ -f /etc/salix-version ]] ; then
		# probably needs treatment like slackware -assume they are using a recent version
		PKG_FORMAT=txz
	elif [[ -f /etc/slitaz-release ]] ; then
		PKG_FORMAT=taz
	elif [[ -f /etc/debian_version ]] || [[ -f /etc/debian-version ]] \
			|| [[ -f /etc/lsb-release ]] ; then
		PKG_FORMAT=deb
	elif [[ -f /etc/redhat-release ]] || [[ -f /etc/redhat_release ]] \
			|| [[ -f /etc/SUSE-release ]] || [[ -f /etc/openSUSE-release ]] \
			|| [[ -f /etc/UnitedLinux-release ]] || [[ -f /etc/mandrake-release ]] \
			|| [[ -f /etc/mandriva-release ]] ; then
		PKG_FORMAT=rpm
	elif [[ -f /etc/DISTRO_SPECS ]] ; then
		PKG_FORMAT=pet PET2=1
	elif [[ -f /etc/puppyversion ]] ; then
		PKG_FORMAT=pet
	else
		PKG_FORMAT=tgz
	fi
fi

# set the interactive mode preferences
if [[ "$INTERACTIVE_MODE" = "ALL" ]] ; then
QUERY_FOR_EXTRA_CONFIGS="YES"
# CONFIRM_CONFIGURATION="YES"
QUERY_FOR_PKG_DESC="YES"
fi

# set the default installation method
! [[ $INSTALL_TYPE ]] && INSTALL_TYPE=DESTDIR
# ! [[ $INSTALL_TYPE ]] && INSTALL_TYPE=JAIL

# Don't generate md5 checksums by default
! [[ $CREATE_MD5_CHECKSUM ]] && CREATE_MD5_CHECKSUM="NO"
# database features
if [[ $EXTENDED_DATABASE = "YES" ]] ; then
	ADD_REQUIRED_FILE="YES"
	ADD_PROVIDES_FILE="YES"
	ADD_SUGGESTS_FILE="YES"
	! [[ $ADD_SRC2PKG_SCRIPT ]] && ADD_SRC2PKG_SCRIPT="YES"
else
	# Don't generate PKG_REQUIRED (slack-required) file by default
	! [[ $ADD_REQUIRED_FILE ]] && ADD_REQUIRED_FILE="NO"
	! [[ $ADD_PROVIDES_FILE ]] && ADD_PROVIDES_FILE="NO"
	! [[ $ADD_SUGGESTS_FILE ]] && ADD_SUGGESTS_FILE="NO"
fi

# Don't use package version numbers in PKG_REQUIRED files
! [[ $INCLUDE_DEP_VERSIONS ]] && INCLUDE_DEP_VERSIONS="NO"
# Exclude aaa_elflibs, glibc* and gcc* packages from PKG_REQUIRED files
! [[ $INCLUDE_BASE_LIBS ]] && INCLUDE_BASE_LIBS="NO"

# options for inclusion of src2pkg scripts inside the package
# Don't include src2pkg buils scripts in the package by default
! [[ $ADD_SRC2PKG_SCRIPT ]] && ADD_SRC2PKG_SCRIPT="NO"
# Default directory for including src2pkg build scripts
# ! [[ $SRC2PKG_SCRIPT_DIR ]] && SRC2PKG_SCRIPT_DIR="/usr/src/src2pkg/scripts"
! [[ $SRC2PKG_SCRIPT_DIR ]] && SRC2PKG_SCRIPT_DIR="DOC_DIR"
# Don't use program  version numbers by default
! [[ $USE_VERSION_NUMBERS ]] && USE_VERSION_NUMBERS="NO"
# if src2pkg scripts are stored outside of DOC_DIR, link to them in DOC_DIR by default
! [[ $LINK_SCRIPT_TO_DOC_DIR ]] && LINK_SCRIPT_TO_DOC_DIR="YES"

# User Authorization options
! [[ $AUTHORIZE_USERS ]] && AUTHORIZE_USERS="NO"
! [[ $AUTHORIZE_USER_CONF ]] && AUTHORIZE_USER_CONF="NO"
! [[ $ALLOW_USER_EXTENSIONS ]] && ALLOW_USER_EXTENSIONS="NO"

# options for auto-detecting configure options
# AUTO_CONFIG can be set to FOREIGN or NATIVE
! [[ $AUTO_CONFIG ]] && AUTO_CONFIG=""
# default list of options to check for
! [[ $AUTO_CONFIG_OPTIONS ]] && AUTO_CONFIG_OPTIONS="sysconfdir localstatedir"
# by default don't create links to common licenses
! [[ $LINK_LICENSES ]] && LINK_LICENSES=NO
# by default, don't compress document directories
! [[ $COMPRESS_DOCS ]] && COMPRESS_DOCS=NO
# by default, use gzip when compressing document directories
! [[ $DOC_COMPRESSOR ]] && DOC_COMPRESSOR=gzip

# COMPRESS_BINS and COMPRESS_LIBS options
! [[ $BIN_COMPRESSOR ]] && BIN_COMPRESSOR=upx-ucl
if ! [[ $BIN_COMPRESSOR_OPTIONS ]] ; then
	if [[ "$BIN_COMPRESSOR" = "upx" ]] || [[ "$BIN_COMPRESSOR" = "upx-ucl" ]] ; then
		BIN_COMPRESSOR_OPTIONS="--brute"
	fi
fi

! [[ $COMPRESSION_SIZE_LIMIT ]] && COMPRESSION_SIZE_LIMIT=50
! [[ $COMPRESS_BINS ]] && COMPRESS_BINS=NO
# turns out this routine doesn't work anyway :-(
# ! [[ $COMPRESS_LIBS ]] && COMPRESS_LIBS=NO

# DESC_WRAP_LENGTH
# this variable tells text_wrapper how characters to use for each line
# in the PKG_DESC files created
! [[ $DESC_WRAP_LENGTH ]] && DESC_WRAP_LENGTH=80
# this variable tells the text wrapper how many lines to pad the PKG_DESC file.
# the PKG_DESC file should be at least 11 lines -the first, second and 11th line
# are supplied separately (8+3=11) and lines 12 and 13 are optionally added
! [[ $DESC_MAX_LINES ]] && DESC_MAX_LINES=11
# HANDY_RULER_TEXT sets the text to write in the header of the PKG_DESC file
# make sure it isn't longer than the $DESC_WRAP_LENGTH above!
! [[ $HANDY_RULER_TEXT ]] && HANDY_RULER_TEXT="Use this guide to format your text with"

# DOWNLOADER
! [[ $DOWNLOADER  ]] &&  DOWNLOADER=wget
# DOWNLOADER_OPTIONS
if [[ "$DOWNLOADER" = "wget" ]] && [[ ! $DOWNLOADER_OPTIONS ]] ; then
	 DOWNLOADER_OPTIONS="--tries=3 --timeout=15 -O"
fi

if [[ "$DOWNLOADER" = "aria2c" ]] && [[ ! $DOWNLOADER_OPTIONS ]] ; then
	 DOWNLOADER_OPTIONS="--seed-time=0"
fi

## EXIT_ON_PATCH_FAILURE
! [[ $EXIT_ON_PATCH_FAILURE ]] && EXIT_ON_PATCH_FAILURE="NO"

# LOG_COMMANDS
! [[ $LOG_COMMANDS ]] && LOG_COMMANDS="NO"

# PATCHES_DIR
! [[ $PATCHES_DIR ]] && PATCHES_DIR="$CWD"

# alias the old FORCE_ZERO_LENGTH
[[ "$ALLOW_EMPTY_FILES" = "YES" ]] && FORCE_ZERO_LENGTH="YES"

## AUTO_DESKTOP
! [[ $AUTO_DESKTOP ]] && AUTO_DESKTOP="NO"

## AUDIO_NOTIFICATION
! [[ $AUDIO_NOTIFICATION ]] && AUDIO_NOTIFICATION="NO"

## TTS_ENGINE
! [[ $TTS_ENGINE ]] && TTS_ENGINE="flite"

## COMPAT_NAME_SUFFIX
! [[ $COMPAT_NAME_SUFFIX ]] &&  COMPAT_NAME_SUFFIX='-compat32'

## COMPAT_NAME_PREFIX
! [[ $COMPAT_NAME_PREFIX ]] &&  COMPAT_NAME_PREFIX=''

## FAIL_ON_BAD_DIRS
! [[ $FAIL_ON_BAD_DIRS ]] && FAIL_ON_BAD_DIRS=YES

## stuff for debian packages
! [[ $DEB_COMPAT ]] && DEB_COMPAT=2.0
! [[ $PKG_COMPRESSOR ]] && PKG_COMPRESSOR=gzip
case $PKG_COMPRESSOR in
	gzip) COMP_EXT=gz ;;
	bzip2) COMP_EXT=bz2 ;;
	lzma) COMP_EXT=lzma ;;
	xz) COMP_EXT=xz ;;
	*) COMP_EXT=gz ;;
esac
# export it so find command works with it later
export COMP_EXT

# remove libtool *.la files if disable-static is used or no *.a files are found
[[ $CORRECT_LIBTOOL_FILES ]] || CORRECT_LIBTOOL_FILES=YES
[[ $ENFORCE_DISABLE_STATIC ]] || ENFORCE_DISABLE_STATIC="YES"
[[ $REMOVE_LIBTOOL_FILES ]] || REMOVE_LIBTOOL_FILES="NO"

[[ $EXTRA_CMAKE_OPTIONS ]] || EXTRA_CMAKE_OPTIONS="-DCMAKE_BUILD_TYPE=Release"

## CHECK_BUILD 
! [[ $CHECK_BUILD ]] && CHECK_BUILD="NO"
## EXIT_ON_CHECK_FAILURE
! [[ $EXIT_ON_CHECK_FAILURE ]] && EXIT_ON_CHECK_FAILURE="NO"

## DOC_SPLIT_SIZE
# When using SPLIT_PACKAGE, only create a 'NAME-docs' package if the documents contents
# are above this size limit (Total of DOC_DIR,MAN_DIR, INFO_DIR and PKG_DIR/usr/share/gtk-doc)
! [[ $DOC_SPLIT_SIZE ]] && DOC_SPLIT_SIZE=100