Kermit FAQ - My Backspace Key Doesn't Work!

(Home) (Prev) (Next)

5 My Backspace Key Doesn't Work!

From: fdc@columbia.edu (Frank da Cruz)
Newsgroups: comp.protocols.kermit.misc
Subject: Re: [?] Backspace key says, "^?"
Date: 7 Jan 1995 21:26:44 GMT
Organization: Columbia University
Lines: 122

In article <D201pG.DMB@indirect.com>,
Jim Monty <monty@indirect.com> wrote:
> DISCLAIMER: I've looked for the answer to the following question in
> _Using MS-DOS Kermit_ and in the documentation included with MS-DOS
> Kermit 3.13.  I either couldn't find the answer or didn't understand
> it if I did.
>
Thank you for consulting the documentation.


> I'm using MS-DOS Kermit 3.13 on an i80386SX machine running MS-DOS
> 6.0, using a 14,400 bps Zoom VFP V.32bis modem.  Kermit is set for
> VT220 terminal emulation and is using the Latin1 character set and
> code page CP437.  I've not mucked with much in the initialization
> files, so you may assume that any other parameters are still set to
> the "factory" defaults.
>
> Alas, the question: In some online environments, my backspace key
> behaves as one would expect it to.  In others, hitting the backspace
> key results in either (1) nothing happening, or (2) the characters
> "^?"  appearing on the screen.
>
Or (3) the Backspace key acts like an Interrupt character on the host
(this usually happens with System V based UNIXes).

> I can, however, use Ctrl-H in these
> situations.  In these exact same online environments (e.g., vi
> insert mode when connected to my dial-up UNIX shell account) under
> analagous circumstances, the other terminal emulator that I use,
> Telemate Version 3.12, does not behave this way.  The backspace key
> functions as a destructive backspace.
>
> I presume that the change I need to make to my MS-DOS Kermit
> configuration is a simple one, but I can't figure it out.  And I've
> never really wanted to bother to spend a lot of time trying to
> figure it out myself.  (I want the magic straight from the wizards'
> minds.)  Thanks, in advance, for taking the time to help me.
>
> Jim Monty, Kermit Cheerleader at Arthur Andersen LLP
>
Well, Jim, I think it's finally time to classify this as a Frequently Asked Question and add it to the FAQ (kermit.columbia.edu:kermit/FAQ.TXT).

As you have discovered, different hosts and applications use different characters (or sequences) for destructive backspace. The terminal emulator, Kermit or otherwise (including Telemate -- if its backspace key works for you in all circumstances, I think that's just a stroke of luck), has no way of knowing what host or application you are using, and therefore no way of knowing what to send when you press the Backspace key.

Of course, Kermit's Backspace key must send *something* "out of the box", so it uses one of the several most likely destructive backspace values, and in fact the one that is defined in ASCII to be destructive backspace, namely Rubout, also known as Delete or DEL, character number 127, which sometimes is displayed as "^?". Lest anyone believe this is a frivolous choice, I quote from American National Standard X3.4-1977, Section 5.1, Control Characters:

0/8 BS (Backspace). A one-active-position format effector that moves the position backward on the same line.

7/15 (DEL). A character used primarily to erase or obliterate an erroneous or unwanted character...

In cases where the default does not work, Kermit lets you redefine the Backspace key (or any other key) to send whatever you want it to send (or to take any other actions) with the SET KEY command.

The SET KEY command has two operands: a unique identifier for a key or key combination, called a scan code, and the value or action to be assigned to the key. Scan codes are written with a preceding backslash (\). The scan code for the Backspace key is \270. The default definition for this key is \127, meaning the character whose numeric value is 127, i.e. DEL.

You can find out a key's scan code by consulting Table I-9 in the manual (pages 285-288), or by giving the SHOW KEY command to Kermit and then pressing the desired key or key combination.

Now, as you have discovered, some applications use Ctrl-H -- ASCII BS (Backspace) -- for destructive backspace. Consulting the ASCII table on page 275, you see that the ASCII code for BS is 8. So to make PC's Backspace key send BS instead of DEL, give this command:

  SET KEY \270 \8
If you use Kermit only to connect to hosts and services that use BS for destructive backspace, then you can put this command in your MSCUSTOM.INI file, and it will take effect automatically every time you start Kermit.

But some people (like yourself) switch between different hosts and/or services that expect different characters or sequences for destructive backspace. You can, of course, give Kermit the appropriate command every time you switch from one to another:

  SET KEY \270 \8    ; Backspace sends BS
or:
  SET KEY \270 \127  ; Backspace sends DEL
or you can use the macros that are already defined in MSKERMIT.INI for this. In version 3.14, for example, we have macros with names like VAX and IBM. The VAX macro sets things up (including the Backspace key) for communicating with VAXes and VAX-like systems, and that means, among other things, setting the Backspace key to send DEL. The IBM macro, on the other hand, is used for communicating with IBM mainframes in linemode, where BS is used.

You can use these macros as they are, or you can write your own macros based upon them and add them to your MSCUSTOM.INI file. To use a macro, just type its name at the MS-Kermit> prompt.

Suppose, for example, you normally access two different systems: a BBS (which uses 8-bit characters, ANSI terminal emulation, and BS) and a UNIX system (which uses 7-bit characters, VT220 emulation, and DEL), and these items need to be changed when you switch between the two. You could write two macros such as these:

  define bbs set term byte 8, set term type ANSI, set key \270 \8
  define unix set term byte 7, set term type vt220, set key \270 \127
And then each time you want to use the BBS, you just type "bbs" at the MS-Kermit> prompt, and each time you want to access the UNIX system, you type "unix".

Of course, you could take this process even further, and turn the BBS and UNIX macros into complete connection-establishment and login scripts, following the directions in Chapter 14 of the manual, on script programming.

[NOTE: In Kermit 95, you can choose the Backspace-key action for each connection on the Dialer Terminal page for that connection.]

- Frank


Kermit FAQ / Columbia University / kermit@columbia.edu