sensord-3.5.0-lp150.3.3.1<>,A\ږ/=„ )uwȌ{V21`|C٠3`%jqS_1\1[Ԏt]34Y-;rp9*@}KF ̀-xRXdC|>4F5?5d   >TXdh{ 8EH    + <X{\(8 9 : =0>0?0@1F1 G1 H1<I1XX1`Y1l\1]1^2b2c3:d3e3f3l3u3v4w50x5Ly5hz55555Csensord3.5.0lp150.3.3.1Hardware health monitoring daemonsensord is a daemon that can be used to periodically log sensor readings from hardware health-monitoring chips to the system logs or a round-robin database (RRD) and to alert when a sensor alarm is signalled; for example, if a fan fails, a temperature limit is exceeded, etc.\ږcloud124openSUSE Leap 15.0openSUSEGPL-2.0-or-laterhttp://bugs.opensuse.orgSystem/Monitoringhttps://github.com/lm-sensors/lm-sensorslinuxx86_64 test -n "$FIRST_ARG" || FIRST_ARG="$1" # disable migration if initial install under systemd [ -d /var/lib/systemd/migrated ] || mkdir -p /var/lib/systemd/migrated || : if [ "$FIRST_ARG" -eq 1 ]; then for service in sensord.service ; do sysv_service="${service%.*}" touch "/var/lib/systemd/migrated/$sysv_service" || : done else for service in sensord.service ; do # The tag file might have been left by a preceding # update (see 1059627) rm -f "/run/rpm-sensors-update-$service-new-in-upgrade" if [ ! -e "/usr/lib/systemd/system/$service" ]; then touch "/run/rpm-sensors-update-$service-new-in-upgrade" fi done for service in sensord.service ; do sysv_service="${service%.*}" if [ -e /var/lib/systemd/migrated/$sysv_service ]; then continue fi if [ ! -x /usr/sbin/systemd-sysv-convert ]; then continue fi /usr/sbin/systemd-sysv-convert --save $sysv_service || : done fi test -n "$FIRST_ARG" || FIRST_ARG="$1" [ -d /var/lib/systemd/migrated ] || mkdir -p /var/lib/systemd/migrated || : if [ "$YAST_IS_RUNNING" != "instsys" -a -x /usr/bin/systemctl ]; then /usr/bin/systemctl daemon-reload || : fi if [ "$FIRST_ARG" -eq 1 ]; then if [ -x /usr/bin/systemctl ]; then /usr/bin/systemctl preset sensord.service || : fi elif [ "$FIRST_ARG" -gt 1 ]; then for service in sensord.service ; do if [ ! -e "/run/rpm-sensors-update-$service-new-in-upgrade" ]; then continue fi rm -f "/run/rpm-sensors-update-$service-new-in-upgrade" if [ ! -x /usr/bin/systemctl ]; then continue fi /usr/bin/systemctl preset "$service" || : done for service in sensord.service ; do sysv_service=${service%.*} if [ -e /var/lib/systemd/migrated/$sysv_service ]; then continue fi if [ ! -x /usr/sbin/systemd-sysv-convert ]; then continue fi /usr/sbin/systemd-sysv-convert --apply $sysv_service || : touch /var/lib/systemd/migrated/$sysv_service || : done fi PNAME=sensord SUBPNAME= SYSC_TEMPLATE=/usr/share/fillup-templates/sysconfig.$PNAME$SUBPNAME # If template not in new /usr/share/fillup-templates, fallback to old TEMPLATE_DIR if [ ! -f $SYSC_TEMPLATE ] ; then TEMPLATE_DIR=/var/adm/fillup-templates SYSC_TEMPLATE=$TEMPLATE_DIR/sysconfig.$PNAME$SUBPNAME fi SD_NAME="" if [ -x /bin/fillup ] ; then if [ -f $SYSC_TEMPLATE ] ; then echo "Updating /etc/sysconfig/$SD_NAME$PNAME ..." mkdir -p /etc/sysconfig/$SD_NAME touch /etc/sysconfig/$SD_NAME$PNAME /bin/fillup -q /etc/sysconfig/$SD_NAME$PNAME $SYSC_TEMPLATE fi else echo "ERROR: fillup not found. This should not happen. Please compare" echo "/etc/sysconfig/$PNAME and $TEMPLATE_DIR/sysconfig.$PNAME and" echo "update by hand." fi test -n "$FIRST_ARG" || FIRST_ARG="$1" if [ "$FIRST_ARG" -eq 0 -a -x /usr/bin/systemctl ]; then # Package removal, not upgrade /usr/bin/systemctl --no-reload disable sensord.service || : ( test "$YAST_IS_RUNNING" = instsys && exit 0 test -f /etc/sysconfig/services -a \ -z "$DISABLE_STOP_ON_REMOVAL" && . /etc/sysconfig/services test "$DISABLE_STOP_ON_REMOVAL" = yes -o \ "$DISABLE_STOP_ON_REMOVAL" = 1 && exit 0 /usr/bin/systemctl stop sensord.service ) || : fi test -n "$FIRST_ARG" || FIRST_ARG="$1" if [ "$FIRST_ARG" -ge 1 ]; then # Package upgrade, not uninstall if [ -x /usr/bin/systemctl ]; then /usr/bin/systemctl daemon-reload || : ( test "$YAST_IS_RUNNING" = instsys && exit 0 test -f /etc/sysconfig/services -a \ -z "$DISABLE_RESTART_ON_UPDATE" && . /etc/sysconfig/services test "$DISABLE_RESTART_ON_UPDATE" = yes -o \ "$DISABLE_RESTART_ON_UPDATE" = 1 && exit 0 /usr/bin/systemctl try-restart sensord.service ) || : fi else # package uninstall for service in sensord.service ; do sysv_service="${service%.*}" rm -f "/var/lib/systemd/migrated/$sysv_service" || : done if [ -x /usr/bin/systemctl ]; then /usr/bin/systemctl daemon-reload || : fi fixFCA큤\ږ\ږ\ږ\ږ[3lV\ږ0293ae6b071892876b0142fcae6c7cc92e3df836d716203f6b86199a281474784c4e4ca03d261a18f467fe7c74d5941a711d9ea12119e8aeba1466521aeb148dab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6d183cdb6a40ba5520493fa9956c481ff7747e12b1d6f97121ea8f6ab804f2215c32512ecde6000a91f4ecfdcc5bfbc15a219197273218aade2903904c32a6bceservicerootrootrootrootrootrootrootrootrootrootrootrootrootrootsensors-3.5.0-lp150.3.3.1.src.rpmsensordsensord(x86-64)sensors:/usr/sbin/sensord @@@@@@@    /bin/sh/bin/sh/bin/sh/bin/shcoreutilsdiffutilsfillupgreplibc.so.6()(64bit)libc.so.6(GLIBC_2.2.5)(64bit)libc.so.6(GLIBC_2.3.4)(64bit)libc.so.6(GLIBC_2.4)(64bit)libc.so.6(GLIBC_2.7)(64bit)librrd.so.8()(64bit)libsensors.so.4()(64bit)rpmlib(CompressedFileNames)rpmlib(FileDigests)rpmlib(PayloadFilesHavePrefix)rpmlib(PayloadIsXz)3.0.4-14.6.0-14.0-15.2-14.14.1\2\>@[=@Zz@Z@X>@W@WiV@U'UUv@TZ@jdelvare@suse.comjdelvare@suse.commalcolmlewis@opensuse.orghillwood@opensuse.orgrbrown@suse.comjdelvare@suse.comjdelvare@suse.comsweet_f_a@gmx.dejdelvare@suse.comjdelvare@suse.comjdelvare@suse.comjdelvare@suse.comjdelvare@suse.com- lm_sensors-3.5.0-libsensors-fix-soname.patch: Undo the SENSORS_API_VERSION change, to stay source-compatible with upstream.- lm_sensors-3.5.0-libsensors-fix-soname.patch: Undo excessive libsensors version bump.- Update to version 3.5.0: + soname was bumped due to commit dcf2367 which introduced an ABI change. + Fixed disappearance of certain hwmon chips with 4.19+ kernels, (gh#lm-sensors/lm-sensors#139, boo#1116021). + Add the find-driver script for debugging. + Various documentation and man page improvements. + Fix various issues found by Coverity Scan. + Fix compilation with the musl C library. + Updated links in documentation to reflect the new home of lm_sensors. + sensors.1: Add reference to sensors-detect and document -j option (json output). + sensors: Add support for json output, add support for power min, lcrit, min_alarm, lcrit_alarm. + sensors-detect: * Fix systemd paths. * Add detection of Fintek F81768. * Only probe I/O ports on x86. * Add detection of Nuvoton NCT6793D. * Add detection of Microchip MCP9808. * Mark F71868A as supported by the f71882fg driver. * Mark F81768D as supported by the f71882fg driver. * Mark F81866D as supported by the f71882fg driver. * Add detection of various ITE chips. * Add detection of Nuvoton NCT6795D. * Add detection of DDR4 SPD. * Add detection of ITE IT8987D. * Add detection of AMD Family 17h temperature sensors. * Add detection of AMD KERNCZ SMBus controller. * Add detection of various Intel SMBus controllers. * Add detection of Giantec GT30TS00. * Add detection of ONS CAT34TS02C and CAT34TS04. * Add detection of AMD Family 15h Model 60+ temperature sensors. * Add detection of Nuvoton NCT6796D. * Add detection of AMD Family 15h Model 70+ temperature sensors. + configs: Add sample configuration files. + sensors.conf.default: * Add hardwired inputs of NCT6795D * Add hardwired inputs of F71868A * Add hardwired NCT6796D inputs + vt1211_pwm: replaced deprecated sub shell syntax, run with bash instead of sh. + pwmconfig: replaced deprecated sub shell syntax. + fancontrol: replaced deprecated sub shell syntax, save original pwm values. + fancontrol.8: replaced deprecated sub shell syntax. + libsensors: * Add support for SENSORS_BUS_TYPE_SCSI, add support for power min, lcrit, min_alarm, lcrit_alarm. * Handle hwmon device with thermal device parent (bsc#1108468). - Rebase lm_sensors-3.0.3-hint-at-kernel-extra-package.patch for new release. - Spec file tidy up for man page extension.- Update version to 3.4.0git20180510.1c48b19, use git version * Support many new hardware: + Add detection of Fintek F81768 + Only probe I/O ports on x86 + Add detection of Nuvoton NCT6793D + Add detection of Microchip MCP9808 + Mark F71868A as supported by the f71882fg driver + Mark F81768D as supported by the f71882fg driver + Mark F81866D as supported by the f71882fg driver + Add detection of various ITE chips + Add detection of Nuvoton NCT6795D + Add detection of DDR4 SPD + Add detection of ITE IT8987D + Add detection of AMD Family 17h temperature sensors + Add detection of AMD KERNCZ SMBus controller + Add detection of various Intel SMBus controllers + Add detection of Giantec GT30TS00 + Add detection of ONS CAT34TS02C and CAT34TS04 + Add detection of AMD Family 15h Model 60+ temperature sensors + Add detection of Nuvoton NCT6796D + Add detection of AMD Family 15h Model 70+ temperature sensors * Fix syntax errors * Fix systemd paths - Drop lm_sensors-3.4.0-sensors-detect-fix-systemd-path.patch Upstream merge this patch - Drop lm_sensors-3.4.0+-Only-probe-I-O-ports-on-x86.patch Upstream merge this patch - Change upstream url.- Replace references to /var/adm/fillup-templates with new %_fillupdir macro (boo#1069468)- lm_sensors-3.4.0+-Only-probe-I-O-ports-on-x86.patch: Skip "random" I/O port probing on non-x86 machines (bsc#1008552)- lm_sensors-3.4.0-sensors-detect-ppc64le.patch: Fix sensors-detect CPU detection support on ppc architectures (bsc#999987)- add lm_sensors-3.4.0-sensors-detect-add-ftsteutates-support.patch for ftsteutates support (Fujitsu Skylake boards)- lm_sensors-3.4.0-sensord-service-extra-args.patch: Allow passing arbitrary extra arguments to sensord.- lm_sensors-3.4.0-sensors-detect-fix-systemd-path.patch: Handle the move of systemd from / to /usr.- Update to lm_sensors 3.4.0 * library: The arbitrary limit on per-type sensor count is gone. Support for temperature min and critical min hysteresis. * sensors: Support for temperature min and critical min hysteresis. * fancontrol: Deal with moving hwmon attributes. Reduce memory consumption. * sensors-detect: Detection of new devices. * lm_sensors-r6216-fancontrol-moving-hwmon-attributes.patch, lm_sensors-r6237-default-config-NCT6779-NCT6791.patch, lm_sensors-r6254-detect-print-kernel-cpu.patch, lm_sensors-r6255-fix-shell-error-FCFANS.patch, lm_sensors-r6282-detect-graphics-card-in-all-cases.patch, lm_sensors-r6283-skip-addresses-0x37-0x4f-on-DDC.patch: Removed, upstream now. * lm_sensors-3.0.0-sensord-separate.patch, lm_sensors-3.0.0-sysconfig_metadata.patch, lm_sensors-3.0.3-hint-at-kernel-extra-package.patch: Refreshed.- lm_sensors-r6282-detect-graphics-card-in-all-cases.patch: sensors-detect: Detect graphics card in all cases (bsc#933072). - lm_sensors-r6283-skip-addresses-0x37-0x4f-on-DDC.patch: sensors-detect: Skip addresses 0x37 and 0x4f on DDC channels (bsc#933072).- lm_sensors-r6216-fancontrol-moving-hwmon-attributes.patch: fancontrol: Deal with moving hwmon attributes. - lm_sensors-r6237-default-config-NCT6779-NCT6791.patch: sensors.conf.default: Add support for NCT6779 and NCT6791. - lm_sensors-r6254-detect-print-kernel-cpu.patch: Print kernel version and processor information. - lm_sensors-r6255-fix-shell-error-FCFANS.patch: fancontrol: Fix shell error when FCFANS is not set (bnc#903520)./bin/sh/bin/sh/bin/sh/bin/shcloud124 15578292683.5.0-lp150.3.3.13.5.0-lp150.3.3.1sensord.servicercsensordsensordsensordCOPYINGsysconfig.sensordsensord.8.gz/usr/lib/systemd/system//usr/sbin//usr/share/doc/packages//usr/share/doc/packages/sensord//usr/share/fillup-templates//usr/share/man/man8/-fmessage-length=0 -grecord-gcc-switches -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector-strong -funwind-tables -fasynchronous-unwind-tables -fstack-clash-protection -gobs://build.opensuse.org/openSUSE:Maintenance:10213/openSUSE_Leap_15.0_Update/ec4c50eb9cb94736b361e6d6d563eea0-sensors.openSUSE_Leap_15.0_Updatedrpmxz5x86_64-suse-linuxASCII textELF 64-bit LSB shared object, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib64/l, for GNU/Linux 3.2.0, BuildID[sha1]=4566dc5c7c5c5d37f96a7fbc1006f08f478b13ad, strippeddirectorytroff or preprocessor input, ASCII text (gzip compressed data, max compression, from Unix)R R R R RR R+Cj ;oMvGutf-8958ac26345fc6edc99b35286de98a85354c48141d6d1b8d1615c5f1cbf0ed495?7zXZ !t/"]"k%jz9:1Iqsd_v h =D9Lyw p:@a駔"S/PuȤg5Da@(Ea/;H)? vfk& \{͚(d#:x"lL}U~xd b$(t''t SZkJ|K0yiyN힞׿qYHe# RMqDy/SRgjš̬;+`LO%?& n(D>B]UZjɵ v\t8xJ?syE^'KZrLxSv7p&\[Kgi VRzn~$g\-C!㐮тKn}E-eDq9J9&5dMX4쉉vXYgH<`㓓s7z1n}xㆳ] N=Ƣ&FA 98x03 9Z3 eG1/[+p܄2 N$ܻaC>XP9<IJVKDDY 񄅡'*80!#F Ab 4A?(8!{=y9\/$GFEBm)l$] uLr+v]mYIHx3W惕{ׯgMtwp"\TGGjA<0 1j fI%?-6F_2Uquԅc@=4K`~XЃ')# pS<}w]'C\O$߭mjh3CBc,B#VLc^s )XyPX)fOsŞe-?tjWyf4[I]*"vͣՄyXlS(j8RO.8]tZM!jJsP >ag?>8d4Ka͡i`Fa_<s ׺F.Wֶ9NlR7)x#XM]Ιz8\8eK"SѿxY}(oNf: HĈj`ydK*ۋeb ak#>V&d5-@FY?ںG{{^X텕.j2e(Ԭ*PܯZٌT)Aq|ǔ%1z[zG;y ?z*ŁkӱB8CFr`N%Ϣ " ]xu#mJߣj<<ܤ^KyT^lg"grz,]r6cc9XO9(* [&\ýA-X_, IڛG3p\Ь9? IyaY2W7_hT΄#"CSQg"Hy6I}}^}^(7-it gK}; #G&l4Ԣ_NB9 t_La(}gqs 9(Y{܈{.5W쉽# ,%Ƿ;v 覗*X5vyr_@Ž2@b@^%un~\.'r!f3K݄(V)F+.;Z菘EDyTϬNeV^>z>/oSxGoNg&5 YZ