/* $NetBSD: pms.c,v 1.37 2018/07/13 19:44:08 maya Exp $ */ /*- * Copyright (c) 2004 Kentaro Kurahone. * Copyright (c) 2004 Ales Krenek. * Copyright (c) 1994 Charles M. Hannum. * Copyright (c) 1992, 1993 Erik Forsberg. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * THIS SOFTWARE IS PROVIDED BY ``AS IS'' AND ANY EXPRESS OR IMPLIED * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN * NO EVENT SHALL I BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include __KERNEL_RCSID(0, "$NetBSD: pms.c,v 1.37 2018/07/13 19:44:08 maya Exp $"); #include "opt_pms.h" #include #include #include #include #include #include #include #include #ifdef PMS_SYNAPTICS_TOUCHPAD #include #endif #ifdef PMS_ELANTECH_TOUCHPAD #include #endif #ifdef PMS_ALPS_TOUCHPAD #include #endif #include #include #include #include #ifdef PMSDEBUG int pmsdebug = 1; #define DPRINTF(x) if (pmsdebug) printf x #else #define DPRINTF(x) #endif static const enum pms_type tries[] = { PMS_SCROLL5, PMS_SCROLL3, PMS_STANDARD, PMS_UNKNOWN }; static const struct pms_protocol pms_protocols[] = { { { 0, 0, 0 }, 0, "unknown protocol" }, { { 0, 0, 0 }, 0, "no scroll wheel (3 buttons)" }, { { 200, 100, 80 }, 3, "scroll wheel (3 buttons)" }, { { 200, 200, 80 }, 4, "scroll wheel (5 buttons)" }, { { 0, 0, 0 }, 0, "synaptics" }, { { 0, 0, 0 }, 0, "elantech" } }; static int pmsprobe(device_t, cfdata_t, void *); static void pmsattach(device_t, device_t, void *); static void pmsinput(void *, int); CFATTACH_DECL_NEW(pms, sizeof(struct pms_softc), pmsprobe, pmsattach, NULL, NULL); static int pms_protocol(pckbport_tag_t, pckbport_slot_t); static void do_enable(struct pms_softc *); static void do_disable(struct pms_softc *); static void pms_reset_thread(void*); static int pms_enable(void *); static int pms_ioctl(void *, u_long, void *, int, struct lwp *); static void pms_disable(void *); static bool pms_suspend(device_t, const pmf_qual_t *); static bool pms_resume(device_t, const pmf_qual_t *); static const struct wsmouse_accessops pms_accessops = { pms_enable, pms_ioctl, pms_disable, }; static int pms_protocol(pckbport_tag_t tag, pckbport_slot_t slot) { u_char cmd[2], resp[1]; int i, j, res; const struct pms_protocol *p; for (j = 0; j < sizeof(tries) / sizeof(tries[0]); ++j) { p = &pms_protocols[tries[j]]; if (!p->rates[0]) break; cmd[0] = PMS_SET_SAMPLE; for (i = 0; i < 3; i++) { cmd[1] = p->rates[i]; res = pckbport_enqueue_cmd(tag, slot, cmd, 2, 0, 1, 0); if (res) return PMS_STANDARD; } cmd[0] = PMS_SEND_DEV_ID; res = pckbport_enqueue_cmd(tag, slot, cmd, 1, 1, 1, resp); if (res) return PMS_UNKNOWN; if (resp[0] == p->response) { DPRINTF(("pms_protocol: found mouse protocol %d\n", tries[j])); return tries[j]; } } DPRINTF(("pms_protocol: standard PS/2 protocol (no scroll wheel)\n")); return PMS_STANDARD; } int pmsprobe(device_t parent, cfdata_t match, void *aux) { struct pckbport_attach_args *pa = aux; u_char cmd[1], resp[2]; int res; if (pa->pa_slot != PCKBPORT_AUX_SLOT) return 0; /* Flush any garbage. */ pckbport_flush(pa->pa_tag, pa->pa_slot); /* reset the device */ cmd[0] = PMS_RESET; res = pckbport_poll_cmd(pa->pa_tag, pa->pa_slot, cmd, 1, 2, resp, 1); if (res) { aprint_debug("pmsprobe: reset error %d\n", res); return 0; } if (resp[0] != PMS_RSTDONE) { printf("pmsprobe: reset response 0x%x\n", resp[0]); return 0; } /* get type number (0 = mouse) */ if (resp[1] != 0) { aprint_debug("pmsprobe: type 0x%x\n", resp[1]); return 0; } return 10; } static void pmsattach(device_t parent, device_t self, void *aux) { struct pms_softc *sc = device_private(self); struct pckbport_attach_args *pa = aux; struct wsmousedev_attach_args a; u_char cmd[2], resp[2]; int res; sc->sc_dev = self; sc->sc_kbctag = pa->pa_tag; sc->sc_kbcslot = pa->pa_slot; aprint_naive("\n"); aprint_normal("\n"); /* Flush any garbage. */ pckbport_flush(pa->pa_tag, pa->pa_slot); /* reset the device */ cmd[0] = PMS_RESET; res = pckbport_poll_cmd(pa->pa_tag, pa->pa_slot, cmd, 1, 2, resp, 1); if (res || resp[0] != PMS_RSTDONE || resp[1] != 0) { aprint_debug("pmsattach: reset error\n"); return; } sc->inputstate = 0; sc->buttons = 0; sc->protocol = PMS_UNKNOWN; #ifdef PMS_SYNAPTICS_TOUCHPAD /* Probe for synaptics touchpad. */ if (pms_synaptics_probe_init(sc) == 0) { sc->protocol = PMS_SYNAPTICS; } else #endif #ifdef PMS_ELANTECH_TOUCHPAD if (pms_elantech_probe_init(sc) == 0) { sc->protocol = PMS_ELANTECH; } else #endif #ifdef PMS_ALPS_TOUCHPAD if (pms_alps_probe_init(sc) == 0) { sc->protocol = PMS_ALPS; } else #endif /* Install generic handler. */ pckbport_set_inputhandler(sc->sc_kbctag, sc->sc_kbcslot, pmsinput, sc, device_xname(sc->sc_dev)); a.accessops = &pms_accessops; a.accesscookie = sc; /* * Attach the wsmouse, saving a handle to it. * Note that we don't need to check this pointer against NULL * here or in pmsintr, because if this fails pms_enable() will * never be called, so pmsinput() will never be called. */ sc->sc_wsmousedev = config_found_ia(self, "wsmousedev", &a, wsmousedevprint); /* no interrupts until enabled */ cmd[0] = PMS_DEV_DISABLE; res = pckbport_poll_cmd(pa->pa_tag, pa->pa_slot, cmd, 1, 0, NULL, 0); if (res) aprint_error("pmsattach: disable error\n"); pckbport_slot_enable(sc->sc_kbctag, sc->sc_kbcslot, 0); kthread_create(PRI_NONE, 0, NULL, pms_reset_thread, sc, &sc->sc_event_thread, "%s", device_xname(sc->sc_dev)); if (!pmf_device_register(self, pms_suspend, pms_resume)) aprint_error_dev(self, "couldn't establish power handler\n"); } static void do_enable(struct pms_softc *sc) { u_char cmd[2]; int res; sc->inputstate = 0; sc->buttons = 0; pckbport_slot_enable(sc->sc_kbctag, sc->sc_kbcslot, 1); #ifdef PMS_SYNAPTICS_TOUCHPAD if (sc->protocol == PMS_SYNAPTICS) pms_synaptics_enable(sc); #endif #ifdef PMS_ELANTECH_TOUCHPAD if (sc->protocol == PMS_ELANTECH) pms_elantech_enable(sc); #endif #ifdef PMS_ALPS_TOUCHPAD if (sc->protocol == PMS_ALPS) pms_alps_enable(sc); #endif cmd[0] = PMS_DEV_ENABLE; res = pckbport_enqueue_cmd(sc->sc_kbctag, sc->sc_kbcslot, cmd, 1, 0, 1, 0); if (res) aprint_error("pms_enable: command error %d\n", res); if (sc->protocol == PMS_UNKNOWN) sc->protocol = pms_protocol(sc->sc_kbctag, sc->sc_kbcslot); DPRINTF(("pms_enable: using %s protocol\n", pms_protocols[sc->protocol].name)); #if 0 { u_char scmd[2]; scmd[0] = PMS_SET_RES; scmd[1] = 3; /* 8 counts/mm */ res = pckbport_enqueue_cmd(sc->sc_kbctag, sc->sc_kbcslot, scmd, 2, 0, 1, 0); if (res) printf("pms_enable: setup error1 (%d)\n", res); scmd[0] = PMS_SET_SCALE21; res = pckbport_enqueue_cmd(sc->sc_kbctag, sc->sc_kbcslot, scmd, 1, 0, 1, 0); if (res) printf("pms_enable: setup error2 (%d)\n", res); scmd[0] = PMS_SET_SAMPLE; scmd[1] = 100; /* 100 samples/sec */ res = pckbport_enqueue_cmd(sc->sc_kbctag, sc->sc_kbcslot, scmd, 2, 0, 1, 0); if (res) printf("pms_enable: setup error3 (%d)\n", res); } #endif } static void do_disable(struct pms_softc *sc) { u_char cmd[1]; int res; cmd[0] = PMS_DEV_DISABLE; res = pckbport_enqueue_cmd(sc->sc_kbctag, sc->sc_kbcslot, cmd, 1, 0, 1, 0); if (res) aprint_error("pms_disable: command error\n"); pckbport_slot_enable(sc->sc_kbctag, sc->sc_kbcslot, 0); } static int pms_enable(void *v) { struct pms_softc *sc = v; int s; if (sc->sc_enabled) return EBUSY; do_enable(sc); s = spltty(); sc->sc_enabled = 1; splx(s); return 0; } static void pms_disable(void *v) { struct pms_softc *sc = v; int s; do_disable(sc); s = spltty(); sc->sc_enabled = 0; splx(s); } static bool pms_suspend(device_t dv, const pmf_qual_t *qual) { struct pms_softc *sc = device_private(dv); if (sc->sc_enabled) do_disable(sc); return true; } static bool pms_resume(device_t dv, const pmf_qual_t *qual) { struct pms_softc *sc = device_private(dv); #ifdef PMS_SYNAPTICS_TOUCHPAD if (sc->protocol == PMS_SYNAPTICS) { pms_synaptics_resume(sc); if (sc->sc_enabled) { do_enable(sc); } } else #endif #ifdef PMS_ELANTECH_TOUCHPAD if (sc->protocol == PMS_ELANTECH) { pms_elantech_resume(sc); if (sc->sc_enabled) { do_enable(sc); } } else #endif #ifdef PMS_ALPS_TOUCHPAD if (sc->protocol == PMS_ALPS) { pms_alps_resume(sc); if (sc->sc_enabled) { do_enable(sc); } } else #endif if (sc->sc_enabled) { /* recheck protocol & init mouse */ sc->protocol = PMS_UNKNOWN; do_enable(sc); /* only if we were suspended */ } return true; } static int pms_ioctl(void *v, u_long cmd, void *data, int flag, struct lwp *l) { struct pms_softc *sc = v; u_char kbcmd[2]; int i; switch (cmd) { case WSMOUSEIO_GTYPE: *(u_int *)data = WSMOUSE_TYPE_PS2; break; case WSMOUSEIO_SRES: i = (*(u_int *)data - 12) / 25; if (i < 0) i = 0; if (i > 3) i = 3; kbcmd[0] = PMS_SET_RES; kbcmd[1] = i; i = pckbport_enqueue_cmd(sc->sc_kbctag, sc->sc_kbcslot, kbcmd, 2, 0, 1, 0); if (i) printf("pms_ioctl: SET_RES command error\n"); break; default: return EPASSTHROUGH; } return 0; } static void pms_reset_thread(void *arg) { struct pms_softc *sc = arg; u_char cmd[1], resp[2]; int res; int save_protocol; for (;;) { tsleep(&sc->sc_enabled, PWAIT, "pmsreset", 0); #ifdef PMSDEBUG if (pmsdebug) #endif #if defined(PMSDEBUG) || defined(DIAGNOSTIC) aprint_debug_dev(sc->sc_dev, "resetting mouse interface\n"); #endif save_protocol = sc->protocol; pms_disable(sc); cmd[0] = PMS_RESET; res = pckbport_enqueue_cmd(sc->sc_kbctag, sc->sc_kbcslot, cmd, 1, 2, 1, resp); if (res) { DPRINTF(("%s: reset error %d\n", device_xname(sc->sc_dev), res)); } /* For the synaptics and elantech case, leave the protocol alone. */ if (sc->protocol != PMS_SYNAPTICS && sc->protocol != PMS_ELANTECH && sc->protocol != PMS_ALPS) sc->protocol = PMS_UNKNOWN; pms_enable(sc); if (sc->protocol != save_protocol) { #if defined(PMSDEBUG) || defined(DIAGNOSTIC) aprint_verbose_dev(sc->sc_dev, "protocol change, sleeping and retrying\n"); #endif pms_disable(sc); cmd[0] = PMS_RESET; res = pckbport_enqueue_cmd(sc->sc_kbctag, sc->sc_kbcslot, cmd, 1, 2, 1, resp); if (res) { DPRINTF(("%s: reset error %d\n", device_xname(sc->sc_dev), res)); } tsleep(pms_reset_thread, PWAIT, "pmsreset", hz); cmd[0] = PMS_RESET; res = pckbport_enqueue_cmd(sc->sc_kbctag, sc->sc_kbcslot, cmd, 1, 2, 1, resp); if (res) { DPRINTF(("%s: reset error %d\n", device_xname(sc->sc_dev), res)); } sc->protocol = PMS_UNKNOWN; /* reprobe protocol */ pms_enable(sc); #if defined(PMSDEBUG) || defined(DIAGNOSTIC) if (sc->protocol != save_protocol) { printf("%s: protocol changed.\n", device_xname(sc->sc_dev)); } #endif } } } /* Masks for the first byte of a packet */ #define PMS_LBUTMASK 0x01 #define PMS_RBUTMASK 0x02 #define PMS_MBUTMASK 0x04 #define PMS_4BUTMASK 0x10 #define PMS_5BUTMASK 0x20 static void pmsinput(void *vsc, int data) { struct pms_softc *sc = vsc; u_int changed; int dx, dy, dz = 0; int newbuttons = 0; if (!sc->sc_enabled) { /* Interrupts are not expected. Discard the byte. */ return; } getmicrouptime(&sc->current); if (sc->inputstate > 0) { struct timeval diff; timersub(&sc->current, &sc->last, &diff); /* * Empirically, the delay should be about 1700us on a standard * PS/2 port. I have seen delays as large as 4500us (rarely) * in regular use. When using a confused mouse, I generally * see delays at least as large as 30,000us. -seebs * * The thinkpad trackball returns at 22-23ms. So we use * >= 40ms. In the future, I'll implement adaptable timeout * by increasing the timeout if the mouse reset happens * too frequently -christos */ if (diff.tv_sec > 0 || diff.tv_usec >= 40000) { DPRINTF(("pms_input: unusual delay (%ld.%06ld s), " "scheduling reset\n", (long)diff.tv_sec, (long)diff.tv_usec)); sc->inputstate = 0; sc->sc_enabled = 0; wakeup(&sc->sc_enabled); return; } } sc->last = sc->current; if (sc->inputstate == 0) { /* * Some devices (seen on trackballs anytime, and on * some mice shortly after reset) output garbage bytes * between packets. Just ignore them. */ if ((data & 0xc0) != 0) return; /* not in sync yet, discard input */ } sc->packet[sc->inputstate++] = data & 0xff; switch (sc->inputstate) { case 0: /* no useful processing can be done yet */ break; case 1: /* * Why should we test for bit 0x8 and insist on it here? * The old (psm.c and psm_intelli.c) drivers didn't do * it, and there are devices where it does harm (that's * why it is not used if using PMS_STANDARD protocol). * Anyway, it does not to cause any harm to accept packets * without this bit. */ #if 0 if (sc->protocol == PMS_STANDARD) break; if (!(sc->packet[0] & 0x8)) { DPRINTF(("pmsinput: 0x8 not set in first byte " "[0x%02x], resetting\n", sc->packet[0])); sc->inputstate = 0; sc->sc_enabled = 0; wakeup(&sc->sc_enabled); return; } #endif break; case 2: break; case 4: /* Case 4 is a superset of case 3. This is *not* an accident. */ if (sc->protocol == PMS_SCROLL3) { dz = sc->packet[3]; if (dz >= 128) dz -= 256; if (dz == -128) dz = -127; } else if (sc->protocol == PMS_SCROLL5) { dz = sc->packet[3] & 0xf; if (dz >= 8) dz -= 16; if (sc->packet[3] & PMS_4BUTMASK) newbuttons |= 0x8; if (sc->packet[3] & PMS_5BUTMASK) newbuttons |= 0x10; } else { DPRINTF(("pmsinput: why am I looking at this byte?\n")); dz = 0; } /* FALLTHROUGH */ case 3: /* * This is only an endpoint for scroll protocols with 4 * bytes, or the standard protocol with 3. */ if (sc->protocol != PMS_STANDARD && sc->inputstate == 3) break; newbuttons |= ((sc->packet[0] & PMS_LBUTMASK) ? 0x1 : 0) | ((sc->packet[0] & PMS_MBUTMASK) ? 0x2 : 0) | ((sc->packet[0] & PMS_RBUTMASK) ? 0x4 : 0); dx = sc->packet[1]; if (dx >= 128) dx -= 256; if (dx == -128) dx = -127; dy = sc->packet[2]; if (dy >= 128) dy -= 256; if (dy == -128) dy = -127; sc->inputstate = 0; changed = (sc->buttons ^ newbuttons); sc->buttons = newbuttons; #ifdef PMSDEBUG if (sc->protocol == PMS_STANDARD) { DPRINTF(("pms: packet: 0x%02x%02x%02x\n", sc->packet[0], sc->packet[1], sc->packet[2])); } else { DPRINTF(("pms: packet: 0x%02x%02x%02x%02x\n", sc->packet[0], sc->packet[1], sc->packet[2], sc->packet[3])); } #endif if (dx || dy || dz || changed) { #ifdef PMSDEBUG DPRINTF(("pms: x %+03d y %+03d z %+03d " "buttons 0x%02x\n", dx, dy, dz, sc->buttons)); #endif wsmouse_input(sc->sc_wsmousedev, sc->buttons, dx, dy, dz, 0, WSMOUSE_INPUT_DELTA); } memset(sc->packet, 0, 4); break; /* If we get here, we have problems. */ default: printf("pmsinput: very confused. resetting.\n"); sc->inputstate = 0; sc->sc_enabled = 0; wakeup(&sc->sc_enabled); return; } } /* * Touchpad special command sequence used by Synaptics and others. * Sends 0xE6 0xE8 rr 0xE8 ss 0xE8 tt 0xE8 uu where (rr*64)+(ss*16)+(tt*4)+uu */ int pms_sliced_command(pckbport_tag_t tag, pckbport_slot_t slot, u_char scmd) { u_char cmd[2]; int i, err, ret = 0; cmd[0] = PMS_SET_SCALE11; ret = pckbport_poll_cmd(tag, slot, cmd, 1, 0, NULL, 0); /* * Need to send 4 Set Resolution commands, with the argument * encoded in the bottom most 2 bits. */ for (i = 6; i >= 0; i -= 2) { cmd[0] = PMS_SET_RES; cmd[1] = (scmd >> i) & 3; err = pckbport_poll_cmd(tag, slot, cmd, 2, 0, NULL, 0); if (ret == 0 && err != 0) { ret = err; } } return ret; }