/* * Copyright (c) 2002-2008 Sam Leffler, Errno Consulting * Copyright (c) 2002-2004 Atheros Communications, Inc. * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. * * $Id: ar5210_beacon.c,v 1.1.1.1 2008/12/11 04:46:27 alc Exp $ */ #include "opt_ah.h" #include "ah.h" #include "ah_internal.h" #include "ah_desc.h" #include "ar5210/ar5210.h" #include "ar5210/ar5210reg.h" #include "ar5210/ar5210desc.h" /* * Initialize all of the hardware registers used to send beacons. */ void ar5210SetBeaconTimers(struct ath_hal *ah, const HAL_BEACON_TIMERS *bt) { OS_REG_WRITE(ah, AR_TIMER0, bt->bt_nexttbtt); OS_REG_WRITE(ah, AR_TIMER1, bt->bt_nextdba); OS_REG_WRITE(ah, AR_TIMER2, bt->bt_nextswba); OS_REG_WRITE(ah, AR_TIMER3, bt->bt_nextatim); /* * Set the Beacon register after setting all timers. */ OS_REG_WRITE(ah, AR_BEACON, bt->bt_intval); } /* * Legacy api to Initialize all of the beacon registers. */ void ar5210BeaconInit(struct ath_hal *ah, uint32_t next_beacon, uint32_t beacon_period) { HAL_BEACON_TIMERS bt; bt.bt_nexttbtt = next_beacon; if (AH_PRIVATE(ah)->ah_opmode != HAL_M_STA) { bt.bt_nextdba = (next_beacon - ath_hal_dma_beacon_response_time) << 3; /* 1/8 TU */ bt.bt_nextswba = (next_beacon - ath_hal_sw_beacon_response_time) << 3; /* 1/8 TU */ /* * The SWBA interrupt is not used for beacons in ad hoc mode * as we don't yet support ATIMs. So since the beacon never * changes, the beacon descriptor is set up once and read * into a special HW buffer, from which it will be * automagically retrieved at each DMA Beacon Alert (DBA). */ /* Set the ATIM window */ bt.bt_nextatim = next_beacon + 0; /* NB: no ATIMs */ } else { bt.bt_nextdba = ~0; bt.bt_nextswba = ~0; bt.bt_nextatim = 1; } bt.bt_intval = beacon_period & (AR_BEACON_PERIOD | AR_BEACON_RESET_TSF | AR_BEACON_EN); ar5210SetBeaconTimers(ah, &bt); } void ar5210ResetStaBeaconTimers(struct ath_hal *ah) { uint32_t val; OS_REG_WRITE(ah, AR_TIMER0, 0); /* no beacons */ val = OS_REG_READ(ah, AR_STA_ID1); val |= AR_STA_ID1_NO_PSPOLL; /* XXX */ /* tell the h/w that the associated AP is not PCF capable */ OS_REG_WRITE(ah, AR_STA_ID1, val & ~(AR_STA_ID1_DEFAULT_ANTENNA | AR_STA_ID1_PCF)); OS_REG_WRITE(ah, AR_BEACON, AR_BEACON_PERIOD); } /* * Set all the beacon related bits on the h/w for stations * i.e. initializes the corresponding h/w timers; * also tells the h/w whether to anticipate PCF beacons * * dtim_count and cfp_count from the current beacon - their current * values aren't necessarily maintained in the device struct */ void ar5210SetStaBeaconTimers(struct ath_hal *ah, const HAL_BEACON_STATE *bs) { struct ath_hal_5210 *ahp = AH5210(ah); HALDEBUG(ah, HAL_DEBUG_BEACON, "%s: setting beacon timers\n", __func__); HALASSERT(bs->bs_intval != 0); /* if the AP will do PCF */ if (bs->bs_cfpmaxduration != 0) { /* tell the h/w that the associated AP is PCF capable */ OS_REG_WRITE(ah, AR_STA_ID1, (OS_REG_READ(ah, AR_STA_ID1) &~ AR_STA_ID1_DEFAULT_ANTENNA) | AR_STA_ID1_PCF); /* set CFP_PERIOD(1.024ms) register */ OS_REG_WRITE(ah, AR_CFP_PERIOD, bs->bs_cfpperiod); /* set CFP_DUR(1.024ms) register to max cfp duration */ OS_REG_WRITE(ah, AR_CFP_DUR, bs->bs_cfpmaxduration); /* set TIMER2(128us) to anticipated time of next CFP */ OS_REG_WRITE(ah, AR_TIMER2, bs->bs_cfpnext << 3); } else { /* tell the h/w that the associated AP is not PCF capable */ OS_REG_WRITE(ah, AR_STA_ID1, OS_REG_READ(ah, AR_STA_ID1) &~ (AR_STA_ID1_DEFAULT_ANTENNA | AR_STA_ID1_PCF)); } /* * Set TIMER0(1.024ms) to the anticipated time of the next beacon. */ OS_REG_WRITE(ah, AR_TIMER0, bs->bs_nexttbtt); /* * Start the beacon timers by setting the BEACON register * to the beacon interval; also write the tim offset which * we should know by now. The code, in ar5211WriteAssocid, * also sets the tim offset once the AID is known which can * be left as such for now. */ OS_REG_WRITE(ah, AR_BEACON, (OS_REG_READ(ah, AR_BEACON) &~ (AR_BEACON_PERIOD|AR_BEACON_TIM)) | SM(bs->bs_intval, AR_BEACON_PERIOD) | SM(bs->bs_timoffset ? bs->bs_timoffset + 4 : 0, AR_BEACON_TIM) ); /* * Configure the BMISS interrupt. Note that we * assume the caller blocks interrupts while enabling * the threshold. */ /* * Interrupt works only on Crete. */ if (AH_PRIVATE(ah)->ah_macRev < AR_SREV_CRETE) return; /* * Counter is only 3-bits. * Count of 0 with BMISS interrupt enabled will hang the system * with too many interrupts */ if (AH_PRIVATE(ah)->ah_macRev >= AR_SREV_CRETE && (bs->bs_bmissthreshold&7) == 0) { #ifdef AH_DEBUG ath_hal_printf(ah, "%s: invalid beacon miss threshold %u\n", __func__, bs->bs_bmissthreshold); #endif return; } #define BMISS_MAX (AR_RSSI_THR_BM_THR >> AR_RSSI_THR_BM_THR_S) /* * Configure the BMISS interrupt. Note that we * assume the caller blocks interrupts while enabling * the threshold. * * NB: the beacon miss count field is only 3 bits which * is much smaller than what's found on later parts; * clamp overflow values as a safeguard. */ ahp->ah_rssiThr = (ahp->ah_rssiThr &~ AR_RSSI_THR_BM_THR) | SM(bs->bs_bmissthreshold > BMISS_MAX ? BMISS_MAX : bs->bs_bmissthreshold, AR_RSSI_THR_BM_THR); OS_REG_WRITE(ah, AR_RSSI_THR, ahp->ah_rssiThr); #undef BMISS_MAX }