/* Copyright (c) 2005 Advanced Micro Devices, Inc. * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to * deal in the Software without restriction, including without limitation the * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the Software is * furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included in * all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS * IN THE SOFTWARE. * * Neither the name of the Advanced Micro Devices, Inc. nor the names of its * contributors may be used to endorse or promote products derived from this * software without specific prior written permission. * */ /* * This file contains routines typically used in driver initialization. * * Routines: * * gfx_pci_config_read * gfx_cpu_config_read * gfx_detect_cpu * gfx_detect_video * gfx_get_cpu_register_base * gfx_get_frame_buffer_base * gfx_get_frame_buffer_size * gfx_get_vid_register_base * gfx_get_vip_register_base * */ /* CONSTANTS USED BY THE INITIALIZATION CODE */ #define PCI_CONFIG_ADDR 0x0CF8 #define PCI_CONFIG_DATA 0x0CFC #define PCI_VENDOR_DEVICE_GXM 0x00011078 #define PCI_VENDOR_DEVICE_REDCLOUD 0x0028100B #define REDCLOUD_VIDEO_PCI_VENDOR_DEVICE 0x0030100B #define GXM_CONFIG_GCR 0xB8 #define GXM_CONFIG_CCR3 0xC3 #define GXM_CONFIG_DIR0 0xFE #define GXM_CONFIG_DIR1 0xFF /* STATIC VARIABLES FOR THIS FILE */ unsigned long gfx_cpu_version = 0; unsigned long gfx_cpu_frequency = 0; unsigned long gfx_vid_version = 0; unsigned long gfx_gx1_scratch_base = 0; unsigned long gfx_gx2_scratch_base = 0x7FC000; unsigned long gfx_pci_speed_khz = 33300; ChipType gfx_chip_revision = CHIP_NOT_DETECTED; ChipType gfx_detect_chip(void); /* INCLUDE SUPPORT FOR FIRST GENERATION, IF SPECIFIED. */ #if GFX_INIT_GU1 #include "init_gu1.c" #endif /* INCLUDE SUPPORT FOR SECOND GENERATION, IF SPECIFIED. */ #if GFX_INIT_GU2 #include "init_gu2.c" #endif /* THE FOLLOWING ROUTINES ARE NEVER DYNAMIC */ /* They are used to set the variables for future dynamic */ /* function calls. */ /*---------------------------------------------------------------------------- * gfx_detect_chip * * This routine returns the name and revision of the chip. This function is * only relevant to the SC1200. *---------------------------------------------------------------------------- */ ChipType gfx_detect_chip(void) { unsigned char pid = INB(SC1200_CB_BASE_ADDR + SC1200_CB_PID); unsigned char rev = INB(SC1200_CB_BASE_ADDR + SC1200_CB_REV); unsigned short clk = INW(SC1200_CB_BASE_ADDR + SC1200_CB_CCFC); gfx_chip_revision = CHIP_NOT_DETECTED; if (pid == 0x4) { switch (rev) { case 0: gfx_chip_revision = SC1200_REV_A; break; case 1: gfx_chip_revision = SC1200_REV_B1_B2; break; case 2: gfx_chip_revision = SC1200_REV_B3; break; case 3: gfx_chip_revision = SC1200_REV_C1; break; case 4: gfx_chip_revision = SC1200_REV_D1; break; case 5: gfx_chip_revision = SC1200_REV_D1_1; break; case 6: gfx_chip_revision = SC1200_REV_D2_MVD; break; } if (rev > 0x6) gfx_chip_revision = SC1200_FUTURE_REV; } else if (pid == 0x5) { if (rev == 0x6) gfx_chip_revision = SC1200_REV_D2_MVE; else if (rev > 0x6) gfx_chip_revision = SC1200_FUTURE_REV; } switch ((clk >> 8) & 3) { case 0: default: gfx_pci_speed_khz = 33300; break; case 1: gfx_pci_speed_khz = 48000; break; case 2: gfx_pci_speed_khz = 66600; break; } return (gfx_chip_revision); } /*---------------------------------------------------------------------------- * gfx_detect_cpu * * This routine returns the type and revison of the CPU. If a Geode * processor is not present, the routine returns zero. * * The return value is as follows: * bits[24:16] = minor version * bits[15:8] = major version * bits[7:0] = type (1 = GXm, 2 = SC1200, 3 = Redcloud) * * A return value of 0x00020501, for example, indicates GXm version 5.2. *---------------------------------------------------------------------------- */ unsigned long gfx_detect_cpu(void) { unsigned long value = 0; unsigned long version = 0; /* initialize core freq. to 0 */ gfx_cpu_frequency = 0; #if GFX_INIT_GU1 value = gfx_pci_config_read(0x80000000); if (value == PCI_VENDOR_DEVICE_GXM) { unsigned char dir0 = gfx_gxm_config_read(GXM_CONFIG_DIR0) & 0xF0; unsigned char dir1 = gfx_gxm_config_read(GXM_CONFIG_DIR1); if (dir0 == 0x40) { /* CHECK FOR GXLV (and GXm) (DIR1 = 0x30 THROUGH 0x82) */ if ((dir1 >= 0x30) && (dir1 <= 0x82)) { /* Major version is one less than what appears in DIR1 */ if ((dir1 & 0xF0) < 0x70) { version = GFX_CPU_GXLV | (((((unsigned long) dir1 >> 4) - 1) << 8)) | /* major - 1 */ ((((unsigned long) dir1 & 0x0F)) << 16); /* minor */ } else { version = GFX_CPU_GXLV | ((((unsigned long) dir1 >> 4)) << 8) | /* major */ ((((unsigned long) dir1 & 0x0F)) << 16); /* minor */ } /* Currently always CS5530 for video overlay. */ #if GFX_VIDEO_DYNAMIC gfx_video_type = GFX_VIDEO_TYPE_CS5530; #endif /* Currently always CS5530 GPIOs for I2C access. */ #if GFX_I2C_DYNAMIC gfx_i2c_type = GFX_I2C_TYPE_GPIO; #endif #if GFX_TV_DYNAMIC gfx_tv_type = GFX_TV_TYPE_FS451; #endif } } else if (dir0 == 0xB0) { /* CHECK FOR SC1200 */ if ((dir1 == 0x70) || (dir1 == 0x81)) { version = GFX_CPU_SC1200 | ((((unsigned long) dir1 >> 4)) << 8) | /* major */ ((((unsigned long) dir1 & 0x0F)) << 16); /* minor */ /* Detect SC1200 revision */ gfx_detect_chip(); /* SC1200 for video overlay and VIP. */ #if GFX_VIDEO_DYNAMIC gfx_video_type = GFX_VIDEO_TYPE_SC1200; #endif #if GFX_VIP_DYNAMIC gfx_vip_type = GFX_VIP_TYPE_SC1200; #endif /* Currently always SAA7114 decoder. */ #if GFX_DECODER_DYNAMIC gfx_decoder_type = GFX_DECODER_TYPE_SAA7114; #endif /* SC1200 for TV encoder */ #if GFX_TV_DYNAMIC gfx_tv_type = GFX_TV_TYPE_SC1200; #endif /* Currently always ACCESS.bus for I2C access. */ #if GFX_I2C_DYNAMIC gfx_i2c_type = GFX_I2C_TYPE_ACCESS; #endif } } if (version) { /* ALWAYS FIRST GENERATION GRAPHICS UNIT */ #if GFX_DISPLAY_DYNAMIC gfx_display_type = GFX_DISPLAY_TYPE_GU1; #endif #if GFX_2DACCEL_DYNAMIC gfx_2daccel_type = GFX_2DACCEL_TYPE_GU1; #endif #if GFX_INIT_DYNAMIC gfx_init_type = GFX_INIT_TYPE_GU1; #endif /* READ THE CORE FREQUENCY */ gfx_cpu_frequency = gfx_get_core_freq(); } } #endif #if GFX_INIT_GU2 value = gfx_pci_config_read(0x80000800); if (value == PCI_VENDOR_DEVICE_REDCLOUD) { Q_WORD msr_value; int valid, i; /* CHECK FOR SOFT VG */ /* If SoftVG is not present, the base addresses for all devices */ /* will not be allocated. Essentially, it is as if no Redcloud */ /* video hardware is present. */ value = gfx_pci_config_read(0x80000900); if (value == REDCLOUD_VIDEO_PCI_VENDOR_DEVICE) { valid = 1; /* BAR0 - BAR3 HOLD THE PERIPHERAL BASE ADDRESSES */ for (i = 0; i < 4; i++) { value = gfx_pci_config_read(0x80000910 + (i << 2)); if (value == 0x00000000 || value == 0xFFFFFFFF) { valid = 0; break; } } if (valid) { /* REDCLOUD INTEGRATED VIDEO */ #if GFX_VIDEO_DYNAMIC gfx_video_type = GFX_VIDEO_TYPE_REDCLOUD; #endif /* CURRENTLY, ALWAYS GPIO FOR I2C ACCESS */ #if GFX_I2C_DYNAMIC gfx_i2c_type = GFX_I2C_TYPE_GPIO; #endif /* SECOND-GENERATION DISPLAY CONTROLLER */ #if GFX_DISPLAY_DYNAMIC gfx_display_type = GFX_DISPLAY_TYPE_GU2; #endif /* SECOND-GENERATION GRAPHICS UNIT */ #if GFX_2DACCEL_DYNAMIC gfx_2daccel_type = GFX_2DACCEL_TYPE_GU2; #endif /* SECOND-GENERATION INITIALIZATION */ #if GFX_INIT_DYNAMIC gfx_init_type = GFX_INIT_TYPE_GU2; #endif /* MBUS MSR ACCESSES */ #if GFX_MSR_DYNAMIC gfx_msr_type = GFX_MSR_TYPE_REDCLOUD; #endif /* CS5530 GPIO I2C */ #if GFX_I2C_DYNAMIC gfx_i2c_type = GFX_I2C_TYPE_GPIO; #endif /* READ VERSION */ gfx_msr_init(); gfx_msr_read(RC_ID_MCP, MCP_RC_REVID, &msr_value); /* SUBTRACT 1 FROM REV ID */ /* REDCLOUD 1.X rev id is 1 less than the reported value */ if ((msr_value.low & 0xF0) == 0x10) msr_value.low--; version = GFX_CPU_REDCLOUD | ((msr_value.low & 0xF0) << 4) | /* MAJOR */ ((msr_value.low & 0x0F) << 16); /* MINOR */ /* READ THE CORE FREQUENCY */ /* I can't find GX implementations that need * this - we're trying to avoid virtual reads * anyway, so bail on it */ /* gfx_cpu_frequency = gfx_get_core_freq(); */ /* SET THE GP SCRATCH AREA */ /* Color bitmap BLTs use the last 16K of frame buffer space */ gfx_gx2_scratch_base = gfx_get_frame_buffer_size() - 0x4000; } } } #endif if (!version) { /* ALWAYS SECOND GENERATION IF SIMULATING */ /* For now, that is. This could change. */ #if GFX_DISPLAY_DYNAMIC gfx_display_type = GFX_DISPLAY_TYPE_GU2; #endif #if GFX_2DACCEL_DYNAMIC gfx_2daccel_type = GFX_2DACCEL_TYPE_GU2; #endif #if GFX_INIT_DYNAMIC gfx_init_type = GFX_INIT_TYPE_GU2; #endif #if GFX_MSR_DYNAMIC gfx_msr_type = GFX_MSR_TYPE_REDCLOUD; #endif #if GFX_VIDEO_DYNAMIC gfx_video_type = GFX_VIDEO_TYPE_REDCLOUD; #endif #if GFX_I2C_DYNAMIC gfx_i2c_type = GFX_I2C_TYPE_GPIO; #endif } gfx_cpu_version = version; return (version); } /*---------------------------------------------------------------------------- * gfx_detect_video * * This routine returns the type of the video hardware. * * The return value is as follows: * bits[7:0] = type (1 = CS5530, 2 = SC1200, 3 = Redcloud) * * Currently this routine does not actually detect any hardware, and bases * the video hardware entirely on the detected CPU. *---------------------------------------------------------------------------- */ unsigned long gfx_detect_video(void) { unsigned long version = 0; if ((gfx_cpu_version & 0xFF) == GFX_CPU_GXLV) version = GFX_VID_CS5530; else if ((gfx_cpu_version & 0xFF) == GFX_CPU_SC1200) version = GFX_VID_SC1200; else if ((gfx_cpu_version & 0xFF) == GFX_CPU_REDCLOUD) version = GFX_VID_REDCLOUD; gfx_vid_version = version; return (version); } /*---------------------------------------------------------------------------- * gfx_pci_config_read * * This routine reads a 32-bit value from the specified location in PCI * configuration space. *---------------------------------------------------------------------------- */ unsigned long gfx_pci_config_read(unsigned long address) { unsigned long value = 0xFFFFFFFF; OUTD(PCI_CONFIG_ADDR, address); value = IND(PCI_CONFIG_DATA); return (value); } /*---------------------------------------------------------------------------- * gfx_pci_config_write * * This routine writes a 32-bit value to the specified location in PCI * configuration space. *---------------------------------------------------------------------------- */ void gfx_pci_config_write(unsigned long address, unsigned long data) { OUTD(PCI_CONFIG_ADDR, address); OUTD(PCI_CONFIG_DATA, data); return; } /* WRAPPERS IF DYNAMIC SELECTION */ /* Extra layer to call either first or second generation routines. */ #if GFX_INIT_DYNAMIC /*---------------------------------------------------------------------------- * gfx_get_core_freq *---------------------------------------------------------------------------- */ unsigned long gfx_get_core_freq(void) { unsigned long freq = 0; #if GFX_INIT_GU1 if (gfx_init_type & GFX_INIT_TYPE_GU1) freq = gu1_get_core_freq(); #endif #if GFX_INIT_GU2 if (gfx_init_type & GFX_INIT_TYPE_GU2) freq = gu2_get_core_freq(); #endif return freq; } /*---------------------------------------------------------------------------- * gfx_get_cpu_register_base *---------------------------------------------------------------------------- */ unsigned long gfx_get_cpu_register_base(void) { unsigned long base = 0; #if GFX_INIT_GU1 if (gfx_init_type & GFX_INIT_TYPE_GU1) base = gu1_get_cpu_register_base(); #endif #if GFX_INIT_GU2 if (gfx_init_type & GFX_INIT_TYPE_GU2) base = gu2_get_cpu_register_base(); #endif return (base); } /*---------------------------------------------------------------------------- * gfx_get_graphics_register_base *---------------------------------------------------------------------------- */ unsigned long gfx_get_graphics_register_base(void) { unsigned long base = 0; #if GFX_INIT_GU2 if (gfx_init_type & GFX_INIT_TYPE_GU2) base = gu2_get_graphics_register_base(); #endif return (base); } /*---------------------------------------------------------------------------- * gfx_get_frame_buffer_base *---------------------------------------------------------------------------- */ unsigned long gfx_get_frame_buffer_base(void) { unsigned long base = 0; #if GFX_INIT_GU1 if (gfx_init_type & GFX_INIT_TYPE_GU1) base = gu1_get_frame_buffer_base(); #endif #if GFX_INIT_GU2 if (gfx_init_type & GFX_INIT_TYPE_GU2) base = gu2_get_frame_buffer_base(); #endif return (base); } /*---------------------------------------------------------------------------- * gfx_get_frame_buffer_size *---------------------------------------------------------------------------- */ unsigned long gfx_get_frame_buffer_size(void) { unsigned long size = 0; #if GFX_INIT_GU1 if (gfx_init_type & GFX_INIT_TYPE_GU1) size = gu1_get_frame_buffer_size(); #endif #if GFX_INIT_GU2 if (gfx_init_type & GFX_INIT_TYPE_GU2) size = gu2_get_frame_buffer_size(); #endif return size; } /*---------------------------------------------------------------------------- * gfx_get_vid_register_base *---------------------------------------------------------------------------- */ unsigned long gfx_get_vid_register_base(void) { unsigned long base = 0; #if GFX_INIT_GU1 if (gfx_init_type & GFX_INIT_TYPE_GU1) base = gu1_get_vid_register_base(); #endif #if GFX_INIT_GU2 if (gfx_init_type & GFX_INIT_TYPE_GU2) base = gu2_get_vid_register_base(); #endif return (base); } /*---------------------------------------------------------------------------- * gfx_get_vip_register_base *---------------------------------------------------------------------------- */ unsigned long gfx_get_vip_register_base(void) { unsigned long base = 0; #if GFX_INIT_GU1 if (gfx_init_type & GFX_INIT_TYPE_GU1) base = gu1_get_vip_register_base(); #endif return (base); } #endif /* END OF FILE */