#!/bin/sh
#
# Copyright (c) 2006 - 2007 Kungliga Tekniska Högskolan
# (Royal Institute of Technology, Stockholm, Sweden). 
# All rights reserved. 
#
# Redistribution and use in source and binary forms, with or without 
# modification, are permitted provided that the following conditions 
# are met: 
#
# 1. Redistributions of source code must retain the above copyright 
#    notice, this list of conditions and the following disclaimer. 
#
# 2. Redistributions in binary form must reproduce the above copyright 
#    notice, this list of conditions and the following disclaimer in the 
#    documentation and/or other materials provided with the distribution. 
#
# 3. Neither the name of the Institute nor the names of its contributors 
#    may be used to endorse or promote products derived from this software 
#    without specific prior written permission. 
#
# THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND 
# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 
# ARE DISCLAIMED.  IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE 
# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 
# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 
# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 
# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 
# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 
# SUCH DAMAGE. 

top_builddir="@top_builddir@"
env_setup="@env_setup@"
objdir="@objdir@"

. ${env_setup}

KRB5_CONFIG="${1-${objdir}/krb5.conf}"
export KRB5_CONFIG

testfailed="echo test failed; cat messages.log; exit 1"

# If there is no useful db support compiled in, disable test
${have_db} || exit 77

R=TEST.H5L.SE
RH=TEST-HTTP.H5L.SE
R2=TEST2.H5L.SE
R3=TEST3.H5L.SE
R4=TEST4.H5L.SE
R5=SOME-REALM5.FR
R6=SOME-REALM6.US
R7=SOME-REALM7.UK
R8=SOME-REALM8.UK

H1=H1.$R
H2=H2.$R
H3=H3.$H2
H4=H4.$H2

r=`echo "$R" | tr '[A-Z]' '[a-z]'`
h1=`echo "${H1}" | tr '[A-Z]' '[a-z]'`
h2=`echo "${H2}" | tr '[A-Z]' '[a-z]'`
h3=`echo "${H3}" | tr '[A-Z]' '[a-z]'`
h4=`echo "${H4}" | tr '[A-Z]' '[a-z]'`

port=@port@
pwport=@pwport@

kadmin="${kadmin} -l -r $R"
kadmin5="${kadmin} -l -r $R5"
kdc="${kdc} --addresses=localhost -P $port"
kpasswdd="${kpasswdd} --addresses=localhost -p $pwport"

server=host/datan.test.h5l.se
server2=host/computer.example.com
serverip=host/10.11.12.13
serveripname=host/ip.test.h5l.org
serveripname2=host/10.11.12.14
alias1=host/datan.example.com
alias2=host/datan
aliaskeytab=host/datan
cache="FILE:${objdir}/cache.krb5"
ocache="FILE:${objdir}/ocache.krb5"
o2cache="FILE:${objdir}/o2cache.krb5"
icache="FILE:${objdir}/icache.krb5"
keytabfile=${objdir}/server.keytab
keytab="FILE:${keytabfile}"
ps="proxy-service@${R}"
aesenctype="aes256-cts-hmac-sha1-96"

kinit="${kinit} -c $cache ${afs_no_afslog}"
klist="${klist} -c $cache"
kgetcred="${kgetcred} -c $cache"
kgetcred_imp="${kgetcred} -c $cache --out-cache=${ocache}"
kdestroy="${kdestroy} -c $cache ${afs_no_unlog}"
kimpersonate="${kimpersonate} -k ${keytab} --ccache=${ocache}"
test_set_kvno0="${test_set_kvno0} -c $cache"

rm -f ${keytabfile}
rm -f current-db*
rm -f out-*
rm -f mkey.file*

> messages.log

echo Creating database
${kadmin} \
    init \
    --realm-max-ticket-life=1day \
    --realm-max-renewable-life=1month \
    ${R} || exit 1

${kadmin} \
    init \
    --realm-max-ticket-life=1day \
    --realm-max-renewable-life=1month \
    ${R2} || exit 1

${kadmin} \
    init \
    --realm-max-ticket-life=1day \
    --realm-max-renewable-life=1month \
    ${R3} || exit 1

${kadmin} \
    init \
    --realm-max-ticket-life=1day \
    --realm-max-renewable-life=1month \
    ${R4} || exit 1

${kadmin5} \
    init \
    --realm-max-ticket-life=1day \
    --realm-max-renewable-life=1month \
    ${R5} || exit 1

${kadmin} \
    init \
    --realm-max-ticket-life=1day \
    --realm-max-renewable-life=1month \
    ${R6} || exit 1

${kadmin} \
    init \
    --realm-max-ticket-life=1day \
    --realm-max-renewable-life=1month \
    ${R7} || exit 1

${kadmin} \
    init \
    --realm-max-ticket-life=1day \
    --realm-max-renewable-life=1month \
    ${R8} || exit 1

${kadmin} \
    init \
    --realm-max-ticket-life=1day \
    --realm-max-renewable-life=1month \
    ${H1} || exit 1

${kadmin} \
    init \
    --realm-max-ticket-life=1day \
    --realm-max-renewable-life=1month \
    ${H2} || exit 1

${kadmin} \
    init \
    --realm-max-ticket-life=1day \
    --realm-max-renewable-life=1month \
    ${H3} || exit 1

${kadmin} \
    init \
    --realm-max-ticket-life=1day \
    --realm-max-renewable-life=1month \
    ${H4} || exit 1

${kadmin} \
    init \
    --realm-max-ticket-life=1day \
    --realm-max-renewable-life=1month \
    ${RH} || exit 1

${kadmin} cpw -r krbtgt/${R}@${R} || exit 1
${kadmin} cpw -r krbtgt/${R}@${R} || exit 1
${kadmin} cpw -r krbtgt/${R}@${R} || exit 1
${kadmin} cpw -r krbtgt/${R}@${R} || exit 1

${kadmin} add -p foo --use-defaults foo@${R} || exit 1
${kadmin} add -p foo --use-defaults foo/host.${r}@${R} || exit 1
${kadmin} add -p foo --use-defaults foo@${R2} || exit 1
${kadmin} add -p foo --use-defaults foo@${R3} || exit 1
${kadmin} add -p foo --use-defaults foo@${R4} || exit 1
${kadmin5} add -p foo --use-defaults foo@${R5} || exit 1
${kadmin} add -p foo --use-defaults foo@${R6} || exit 1
${kadmin} add -p foo --use-defaults foo@${R7} || exit 1
${kadmin} add -p foo --use-defaults foo@${R8} || exit 1
${kadmin} add -p foo --use-defaults foo@${H1} || exit 1
${kadmin} add -p foo --use-defaults foo/host.${h1}@${H1} || exit 1
${kadmin} add -p foo --use-defaults foo@${H2} || exit 1
${kadmin} add -p foo --use-defaults foo/host.${h2}@${H2} || exit 1
${kadmin} add -p foo --use-defaults foo@${H3} || exit 1
${kadmin} add -p foo --use-defaults foo/host.${h3}@${H3} || exit 1
${kadmin} add -p foo --use-defaults foo@${H4} || exit 1
${kadmin} add -p foo --use-defaults foo/host.${h4}@${H4} || exit 1
${kadmin} add -p bar --use-defaults bar@${R} || exit 1
${kadmin} add -p foo --use-defaults remove@${R} || exit 1
${kadmin} add -p nop --use-defaults ${server}@${R} || exit 1
${kadmin} cpw -p bla --keepold ${server}@${R} || exit 1
${kadmin} cpw -p kaka --keepold ${server}@${R} || exit 1
${kadmin} add -p kaka --use-defaults ${server}-des3@${R} || exit 1
${kadmin} add -p kaka --use-defaults kt-des3@${R} || exit 1
${kadmin} add -p kaka --use-defaults foo/des3-only@${R} || exit 1
${kadmin} add -p kaka --use-defaults bar/des3-only@${R} || exit 1
${kadmin} add -p kaka --use-defaults foo/aes-only@${R} || exit 1

${kadmin} add -p sens --use-defaults --attributes=disallow-forwardable sensitive@${R} || exit 1
${kadmin} add -p foo --use-defaults ${ps} || exit 1
${kadmin} modify --attributes=+trusted-for-delegation ${ps} || exit 1
${kadmin} modify --constrained-delegation=${server} ${ps} || exit 1
${kadmin} ext -k ${keytab} ${server}@${R} || exit 1
${kadmin} ext -k ${keytab} ${ps} || exit 1

${kadmin} add -p kaka --use-defaults ${server2}@${R2} || exit 1
${kadmin} ext -k ${keytab} ${server2}@${R2} || exit 1
${kadmin} add -p kaka --use-defaults ${serverip}@${R} || exit 1
${kadmin} ext -k ${keytab} ${serverip}@${R} || exit 1
${kadmin} add -p kaka --use-defaults ${serveripname}@${R} || exit 1
${kadmin} ext -k ${keytab} ${serveripname}@${R} || exit 1
${kadmin} modify --alias=${serveripname2}@${R} ${serveripname}@${R}
${kadmin} add -p foo --use-defaults remove2@${R2} || exit 1

${kadmin} add -p kaka --use-defaults ${alias1}@${R} || exit 1
${kadmin} ext -k ${keytab} ${alias1}@${R} || exit 1
${kadmin} modify --alias=${alias2}@${R} ${alias1}@${R}

${kadmin} add -p cross1 --use-defaults krbtgt/${R2}@${R} || exit 1
${kadmin} add -p cross2 --use-defaults krbtgt/${R}@${R2} || exit 1

${kadmin} add -p cross1 --use-defaults krbtgt/${R3}@${R2} || exit 1
${kadmin} add -p cross2 --use-defaults krbtgt/${R2}@${R3} || exit 1

${kadmin} add -p cross1 --use-defaults krbtgt/${R4}@${R2} || exit 1
${kadmin} add -p cross2 --use-defaults krbtgt/${R2}@${R4} || exit 1

${kadmin} add -p cross1 --use-defaults krbtgt/${R4}@${R3} || exit 1
${kadmin} add -p cross2 --use-defaults krbtgt/${R3}@${R4} || exit 1

${kadmin} add -p cross1 --use-defaults krbtgt/${R5}@${R} || exit 1
${kadmin5} add -p cross2 --use-defaults krbtgt/${R}@${R5} || exit 1

${kadmin5} add -p cross1 --use-defaults krbtgt/${R6}@${R5} || exit 1
${kadmin} add -p cross2 --use-defaults krbtgt/${R5}@${R6} || exit 1

${kadmin} add -p cross1 --use-defaults krbtgt/${R7}@${R6} || exit 1
${kadmin} add -p cross2 --use-defaults krbtgt/${R6}@${R7} || exit 1

${kadmin} add -p cross1 --use-defaults krbtgt/${R8}@${R6} || exit 1
${kadmin} add -p cross2 --use-defaults krbtgt/${R6}@${R8} || exit 1

${kadmin} add -p cross1 --use-defaults krbtgt/${H1}@${R} || exit 1
${kadmin} add -p cross2 --use-defaults krbtgt/${R}@${H1} || exit 1

${kadmin} add -p cross1 --use-defaults krbtgt/${H2}@${R} || exit 1
${kadmin} add -p cross2 --use-defaults krbtgt/${R}@${H2} || exit 1

${kadmin} add -p cross1 --use-defaults krbtgt/${H3}@${H2} || exit 1
${kadmin} add -p cross2 --use-defaults krbtgt/${H2}@${H3} || exit 1

${kadmin} add -p cross1 --use-defaults krbtgt/${H3}@${H4} || exit 1
${kadmin} add -p cross2 --use-defaults krbtgt/${H4}@${H3} || exit 1

${kadmin} add -p foo --use-defaults pw-expire@${R} || exit 1
${kadmin} modify --pw-expiration-time=+1day  pw-expire@${R} || exit 1

${kadmin} add -p foo --use-defaults pw-expired@${R} || exit 1
${kadmin} modify --pw-expiration-time=2012-06-12  pw-expired@${R} || exit 1

${kadmin} add -p foo --use-defaults account-expired@${R} || exit 1
${kadmin} modify --expiration-time=2012-06-12  account-expired@${R} || exit 1

${kadmin} add -p foo --use-defaults foo@${RH} || exit 1

echo "Check parser"
${kadmin} add -p foo --use-defaults -- -p || exit 1
${kadmin} delete -- -p || exit 1

echo "Doing database check"
${kadmin} check ${R} || exit 1
${kadmin} check ${R2} || exit 1
${kadmin} check ${R3} || exit 1
${kadmin} check ${R4} || exit 1
${kadmin5} check ${R5} || exit 1
${kadmin} check ${R6} || exit 1
${kadmin} check ${R7} || exit 1
${kadmin} check ${R8} || exit 1
${kadmin} check ${H1} || exit 1
${kadmin} check ${H2} || exit 1
${kadmin} check ${H3} || exit 1
${kadmin} check ${H4} || exit 1

echo "Extracting enctypes"
${ktutil} -k ${keytab} list > tempfile || exit 1
${EGREP} -v '^FILE:' tempfile | ${EGREP} -v '^Vno' | ${EGREP} -v '^$' | \
    ${EGREP} -v "$server" |                 # we did cpw for this one
    awk '$1 !~ /1/  { exit 1 }' || exit 1
${EGREP} -v '^FILE:' tempfile | ${EGREP} -v '^Vno' | ${EGREP} -v '^$' | \
    ${EGREP} "$server" | head -1 |
    awk '$1 !~ /3/  { exit 1 }' || exit 1


${kadmin} get foo@${R} > tempfile || exit 1
enctypes=`grep Keytypes: tempfile | sed 's/(pw-salt)//g' | sed 's/,//g' | sed 's/Keytypes://' | sed 's/\[[0-9]*\]//g'`

enctype_sans_aes=`echo $enctypes | sed 's/aes[^ ]*//g'`
enctype_sans_des3=`echo $enctypes | sed 's/des3-cbc-sha1//g'`

echo "deleting all but des enctypes on kt-des3 in keytab"
${kadmin} ext -k ${keytab} kt-des3@${R} || exit 1
for a in ${enctype_sans_des3} ; do
   ${ktutil} -k ${keytab} remove -p kt-des3@${R} -e $a
done

echo "checking globbing keys rules"
${kadmin} get foo/des3-only@${R} > tempfile || exit 1
enctypes=`grep Keytypes: tempfile | sed 's/(pw-salt)//g' | sed 's/,//g' | sed 's/Keytypes://' | sed 's/\[[0-9]*\]//g' | sed 's/ //g'`
if [ X"$enctypes" != Xdes3-cbc-sha1 ] ; then
    echo "des3 only is not only des3: $enctypes"
    exit 1
fi

${kadmin} get foo/aes-only@${R} > tempfile || exit 1
enctypes=`grep Keytypes: tempfile | sed 's/(pw-salt)//g' | sed 's/,//g' | sed 's/Keytypes://' | sed 's/\[[0-9]*\]//g' | sed 's/ //g'`
if [ X"$enctypes" != Xaes256-cts-hmac-sha1-96 ] ; then
    echo "aes only is not only aes: $enctypes"
    exit 1
fi


echo foo > ${objdir}/foopassword
echo notfoo > ${objdir}/notfoopassword

echo Starting kdc ; > messages.log
env MallocStackLogging=1 MallocStackLoggingNoCompact=1 MallocErrorAbort=1 MallocLogFile=${objdir}/malloc-log \
${kdc} --detach --testing ||
    { echo "kdc failed to start"; exit 1; }
kdcpid=`getpid kdc`

echo Starting kpasswdd; > messages.log
env ${HEIM_MALLOC_DEBUG} ${kpasswdd} --detach ||
    { echo "kpasswdd failed to start"; exit 1; }
kpasswddpid=`getpid kpasswdd`


trap "kill -9 ${kdcpid} ${kpasswddpid}; echo signal killing kdc kpasswdd; exit 1;" EXIT

ec=0

echo "Getting client initial tickets with wrong password"; > messages.log
${kinit} --password-file=${objdir}/notfoopassword \
        foo@${R} 2>kinit-log.tmp && \
	{ ec=1 ; eval "${testfailed}"; }
grep 'Password incorrect' kinit-log.tmp > /dev/null || \
	{ ec=1 ; eval "${testfailed}"; }
echo "Getting client initial tickets"; > messages.log
${kinit} --password-file=${objdir}/foopassword foo@$R || \
	{ ec=1 ; eval "${testfailed}"; }
echo "Doing krbtgt key rollover"; > messages.log
${kadmin} cpw -r --keepold krbtgt/${R}@${R} || exit 1
echo "Getting tickets"; > messages.log
${kgetcred} ${server}@${R} || { ec=1 ; eval "${testfailed}"; }
echo "Listing tickets"; > messages.log
${klist} > /dev/null || { ec=1 ; eval "${testfailed}"; }
${test_ap_req} ${server}@${R} ${keytab} ${cache} || \
	{ ec=1 ; eval "${testfailed}"; }
${kdestroy}

echo "Getting client initial tickets (http transport)"; > messages.log
${kinit} --password-file=${objdir}/foopassword foo@${RH} || \
	{ ec=1 ; eval "${testfailed}"; }
${kdestroy}

echo "Testing capaths logic"
${kinit} --password-file=${objdir}/foopassword \
    -e ${aesenctype} -e ${aesenctype} \
    foo@$R || \
	{ ec=1 ; eval "${testfailed}"; }

echo "Getting x-realm tickets with capaths for $R -> $R2"
${kgetcred} foo@${R2} || { ec=1 ; eval "${testfailed}"; }
echo "Getting x-realm tickets with capaths for $R -> $R3"
${kgetcred} foo@${R3} || { ec=1 ; eval "${testfailed}"; }
echo "Getting x-realm tickets with capaths for $R -> $R4"
${kgetcred} foo@${R4} || { ec=1 ; eval "${testfailed}"; }
echo "Getting x-realm tickets with capaths for $R -> $R5"
${kgetcred} foo@${R5} || { ec=1 ; eval "${testfailed}"; }
echo "Getting x-realm tickets with capaths for $R -> $R6"
${kgetcred} foo@${R6} || { ec=1 ; eval "${testfailed}"; }
echo "Getting x-realm tickets with capaths for $R -> $R7"
${kgetcred} foo@${R7} || { ec=1 ; eval "${testfailed}"; }
echo "Should not get x-realm tickets with capaths for $R -> $R8"
${kgetcred} foo@${R8} && { ec=1 ; eval "${testfailed}"; }
${kdestroy}

echo "Testing capaths logic (reverse order)"
${kinit} --password-file=${objdir}/foopassword \
    -e ${aesenctype} -e ${aesenctype} \
    foo@$R || \
	{ ec=1 ; eval "${testfailed}"; }

echo "Getting x-realm tickets with capaths for $R -> $R4"
${kgetcred} foo@${R4} || { ec=1 ; eval "${testfailed}"; }
echo "Getting x-realm tickets with capaths for $R -> $R3"
${kgetcred} foo@${R3} || { ec=1 ; eval "${testfailed}"; }
echo "Getting x-realm tickets with capaths for $R -> $R2"
${kgetcred} foo@${R2} || { ec=1 ; eval "${testfailed}"; }
echo "Getting x-realm tickets with capaths for $R -> $R7"
${kgetcred} foo@${R7} || { ec=1 ; eval "${testfailed}"; }
echo "Getting x-realm tickets with capaths for $R -> $R6"
${kgetcred} foo@${R6} || { ec=1 ; eval "${testfailed}"; }
echo "Getting x-realm tickets with capaths for $R -> $R5"
${kgetcred} foo@${R5} || { ec=1 ; eval "${testfailed}"; }
${kdestroy}

echo "Testing hierarchical referral logic"
${kinit} --password-file=${objdir}/foopassword \
    -e ${aesenctype} -e ${aesenctype} \
    foo@${H3} || \
	{ ec=1 ; eval "${testfailed}"; }

echo "Getting x-realm tickets with hierarchical referrals for $H3 -> $H1"
${kgetcred} --hostbased --canonicalize foo host.${h1} || { ec=1 ; eval "${testfailed}"; }
fgrep "cross-realm ${H3} -> ${H1} via [${H2}, ${R}]" messages.log > /dev/null || { ec=1 ; eval "${testfailed}"; }
echo "Getting x-realm tickets with hierarchical referrals for $H3 -> $R"
${kgetcred} --hostbased --canonicalize foo host.${r} || { ec=1 ; eval "${testfailed}"; }
fgrep "cross-realm ${H3} -> ${R} via [${H2}]" messages.log > /dev/null || { ec=1 ; eval "${testfailed}"; }
echo "Getting x-realm tickets with hierarchical referrals for $H3 -> $H2"
${kgetcred} --hostbased --canonicalize foo host.${h2} || { ec=1 ; eval "${testfailed}"; }
fgrep "cross-realm ${H3} -> ${H2}" messages.log > /dev/null || { ec=1 ; eval "${testfailed}"; }
${kdestroy}

echo "Testing multi-hop [capaths] referral logic"
${kinit} --password-file=${objdir}/foopassword \
    -e ${aesenctype} -e ${aesenctype} \
    foo@${H4} || \
	{ ec=1 ; eval "${testfailed}"; }

echo "Getting x-realm tickets with [capaths] referrals for $H4 -> $H1"
${kgetcred} --hostbased --canonicalize foo/host.${h1}@${H4} || { ec=1 ; eval "${testfailed}"; }
${kdestroy}

echo "Testing forwardable/renewable flag copying in TGS-REQ"
${kinit} -f --renewable -r 5d --password-file=${objdir}/foopassword foo@$R || \
	{ ec=1 ; eval "${testfailed}"; }
${kgetcred} ${server}@${R} || { ec=1 ; eval "${testfailed}"; }
${klist} -f | grep ${server} | grep FRA > /dev/null || \
	{ ec=1 ; eval "${testfailed}"; }

echo "Testing strip of forwardable when the server is disallowed in TGS-REQ"
${kgetcred} sensitive@${R} || { ec=1 ; eval "${testfailed}"; }
${klist} -f | grep sensitive | grep FRA > /dev/null && \
	{ ec=1 ; eval "${testfailed}"; }

echo "Specific enctype"; > messages.log
${kinit} --password-file=${objdir}/foopassword \
    -e ${aesenctype} -e ${aesenctype} \
    foo@$R || \
	{ ec=1 ; eval "${testfailed}"; }

for a in $enctypes; do
	echo "Getting client initial tickets ($a)"; > messages.log
	${kinit} --enctype=$a --password-file=${objdir}/foopassword foo@$R || { ec=1 ; eval "${testfailed}"; }
	echo "Getting tickets"; > messages.log
	${kgetcred} ${server}@${R} || { ec=1 ; eval "${testfailed}"; }
	${test_ap_req} ${server}@${R} ${keytab} ${cache} || { ec=1 ; eval "${testfailed}"; }
	${kdestroy}
done


echo "Getting client initial tickets"; > messages.log
${kinit} --password-file=${objdir}/foopassword foo@$R || \
	{ ec=1 ; eval "${testfailed}"; }
for a in $enctypes; do
	echo "Getting tickets ($a)"; > messages.log
	${kgetcred} -e $a ${server}@${R} || { ec=1 ; eval "${testfailed}"; }
	${test_ap_req} ${server}@${R} ${keytab} ${cache} || \
		{ ec=1 ; eval "${testfailed}"; }
	${kdestroy} --credential=${server}@${R}
done
${kdestroy}

echo "Getting client authenticated anonymous initial tickets"; > messages.log
${kinit} -n --password-file=${objdir}/foopassword foo@$R || \
	{ ec=1 ; eval "${testfailed}"; }
for a in $enctypes; do
	echo "Getting tickets ($a)"; > messages.log
	${kgetcred} -e $a ${server}@${R} || { ec=1 ; eval "${testfailed}"; }
	${test_ap_req} ${server}@${R} ${keytab} ${cache} || \
		{ ec=1 ; eval "${testfailed}"; }
	${kdestroy} --credential=${server}@${R}
done
${kdestroy}

echo "Getting client anonymous service tickets"; > messages.log
${kinit} --password-file=${objdir}/foopassword foo@$R || \
	{ ec=1 ; eval "${testfailed}"; }
for a in $enctypes; do
	echo "Getting tickets ($a)"; > messages.log
	${kgetcred} -n -e $a ${server}@${R} || { ec=1 ; eval "${testfailed}"; }
	${test_ap_req} ${server}@${R} ${keytab} ${cache} || \
		{ ec=1 ; eval "${testfailed}"; }
	${kdestroy} --credential=${server}@${R}
done
${kdestroy}

echo "Getting client initial tickets for cross realm case"; > messages.log
${kinit} --password-file=${objdir}/foopassword foo@$R || { ec=1 ; eval "${testfailed}"; }
for a in $enctypes; do
	echo "Getting cross realm tickets ($a)"; > messages.log
	${kgetcred} -e $a ${server2}@${R2} || { ec=1 ; eval "${testfailed}"; }
	echo "  checking we we got back right ticket"
	${klist} | grep ${server2}@ > /dev/null || { ec=1 ; eval "${testfailed}"; }
	echo "  checking if ticket is useful"
	${test_ap_req} ${server2}@${R2} ${keytab} ${cache} || \
		{ ec=1 ; eval "${testfailed}"; }
	${kdestroy} --credential=${server2}@${R2}
done
${kdestroy}

echo "Trying x-realm TGT with kvno 0 case";
${kinit} --password-file=${objdir}/foopassword foo@$R ||
	{ ec=1 ; eval "${testfailed}"; }
${test_set_kvno0} || { ec=1 ; eval "${testfailed}"; }
echo "Getting cross realm tickets"; > messages.log
${kgetcred} krbtgt/${R2}@${R} || { ec=1 ; eval "${testfailed}"; }
${test_set_kvno0} || { ec=1 ; eval "${testfailed}"; }
echo "Getting service ticket"; > messages.log
${kgetcred} ${server2}@${R2} || { ec=1 ; eval "${testfailed}"; }
${kdestroy}

echo "Trying x-realm TGT with kvno 0 case with key rollover";
${kinit} --password-file=${objdir}/foopassword foo@$R ||
	{ ec=1 ; eval "${testfailed}"; }
${test_set_kvno0} || { ec=1 ; eval "${testfailed}"; }
echo "Getting cross realm tickets"; > messages.log
${kgetcred} krbtgt/${R2}@${R} || { ec=1 ; eval "${testfailed}"; }
echo "Rolling over cross realm keys"; > messages.log
${kadmin} cpw -r --keepold krbtgt/${R}@${R} || { ec=1 ; eval "${testfailed}"; }
${kadmin} cpw -r --keepold krbtgt/${R2}@${R} || { ec=1 ; eval "${testfailed}"; }
${kadmin} cpw -r --keepold krbtgt/${R}@${R2} || { ec=1 ; eval "${testfailed}"; }
${test_set_kvno0} || { ec=1 ; eval "${testfailed}"; }
echo "Getting service ticket"; > messages.log
echo "Start tracing kdc, then hit return"
${kgetcred} ${server2}@${R2} || { ec=1 ; eval "${testfailed}"; }
${kdestroy}

echo "Trying x-realm TGT with no kvno case";
${kinit} --password-file=${objdir}/foopassword foo@$R ||
	{ ec=1 ; eval "${testfailed}"; }
${test_set_kvno0} -n || { ec=1 ; eval "${testfailed}"; }
echo "Getting cross realm tickets"; > messages.log
${kgetcred} krbtgt/${R2}@${R} || { ec=1 ; eval "${testfailed}"; }
${test_set_kvno0} -n || { ec=1 ; eval "${testfailed}"; }
echo "Getting service ticket"; > messages.log
${kgetcred} ${server2}@${R2} || { ec=1 ; eval "${testfailed}"; }
${kdestroy}

echo "Trying x-realm TGT with no kvno case with key rollover";
${kinit} --password-file=${objdir}/foopassword foo@$R ||
	{ ec=1 ; eval "${testfailed}"; }
${test_set_kvno0} -n || { ec=1 ; eval "${testfailed}"; }
echo "Getting cross realm tickets"; > messages.log
${kgetcred} krbtgt/${R2}@${R} || { ec=1 ; eval "${testfailed}"; }
echo "Rolling over cross realm keys"; > messages.log
${kadmin} cpw -r --keepold krbtgt/${R}@${R} || { ec=1 ; eval "${testfailed}"; }
${kadmin} cpw -r --keepold krbtgt/${R2}@${R} || { ec=1 ; eval "${testfailed}"; }
${kadmin} cpw -r --keepold krbtgt/${R}@${R2} || { ec=1 ; eval "${testfailed}"; }
${test_set_kvno0} -n || { ec=1 ; eval "${testfailed}"; }
echo "Getting service ticket"; > messages.log
echo "Start tracing kdc, then hit return"
${kgetcred} ${server2}@${R2} || { ec=1 ; eval "${testfailed}"; }
${kdestroy}

echo "try all permutations"; > messages.log
for a in $enctypes; do
	echo "Getting client initial tickets ($a)"; > messages.log
	${kinit} --enctype=$a --password-file=${objdir}/foopassword foo@$R || \
		{ ec=1 ; eval "${testfailed}"; }
	for b in $enctypes; do
		echo "Getting tickets ($a ->  $b)"; > messages.log
		${kgetcred} -e $b ${server}@${R} || \
			{ ec=1 ; eval "${testfailed}"; }
		${test_ap_req} ${server}@${R} ${keytab} ${cache} || \
			{ ec=1 ; eval "${testfailed}"; }
		${kdestroy} --credential=${server}@${R}
	done
	${kdestroy}
done

echo "Getting client initial tickets ip based name"; > messages.log
${kinit} --password-file=${objdir}/foopassword foo@$R || { ec=1 ; eval "${testfailed}"; }
echo "Getting ip based name tickets"; > messages.log
${kgetcred} ${serverip}@${R} || { ec=1 ; eval "${testfailed}"; }
echo "  checking we we got back right ticket"
${klist} | grep ${serverip}@ > /dev/null || { ec=1 ; eval "${testfailed}"; }
echo "  checking if ticket is useful"
${test_ap_req} ${serverip}@${R} ${keytab} ${cache} || \
	{ ec=1 ; eval "${testfailed}"; }
${kdestroy}

echo "Getting client initial tickets ip based name (alias)"; > messages.log
${kinit} --password-file=${objdir}/foopassword foo@$R || { ec=1 ; eval "${testfailed}"; }
for a in ${serveripname} ${serveripname2} ; do
    echo "Getting ip based name tickets (alias) $a"; > messages.log
    ${kgetcred} ${a}@${R} || { ec=1 ; eval "${testfailed}"; }
    echo "  checking we we got back right ticket"
    ${klist} | grep ${a}@ > /dev/null || { ec=1 ; eval "${testfailed}"; }
    echo "  checking if ticket is useful"
    ${test_ap_req} --server-any ${a}@${R} ${keytab} ${cache} || \
    	{ ec=1 ; eval "${testfailed}"; }
done
${kdestroy}

echo "Getting server initial tickets"; > messages.log
${kinit} --keytab=${keytab} ${server}@$R || { ec=1 ; eval "${testfailed}"; }
echo "Listing tickets"; > messages.log
${klist} | grep "Principal: ${server}" > /dev/null || \
	{ ec=1 ; eval "${testfailed}"; }
${kdestroy}

echo "Getting key for key that are a subset in keytab compared to kdb"
${kinit} --keytab=${keytab} kt-des3@${R}
${klist} | grep "Principal: kt-des3" > /dev/null || \
	{ ec=1 ; eval "${testfailed}"; }
${kdestroy}

echo "initial tickets for deleted user test case"; > messages.log
${kinit} --password-file=${objdir}/foopassword remove@$R || \
	{ ec=1 ; eval "${testfailed}"; }
${kadmin} delete remove@${R} || { ec=1 ; eval "${testfailed}"; }
echo "try getting ticket with deleted user"; > messages.log
${kgetcred} ${server}@${R} 2> /dev/null && { ec=1 ; eval "${testfailed}"; }
${kdestroy}

echo "cross realm case (deleted user)"; > messages.log
${kinit} --password-file=${objdir}/foopassword remove2@$R2 || \
	{ ec=1 ; eval "${testfailed}"; }
${kgetcred} krbtgt/${R}@${R2} 2> /dev/null || \
	{ ec=1 ; eval "${testfailed}"; }
${kadmin} delete remove2@${R2} || exit 1
${kgetcred} ${server}@${R} 2> /dev/null || \
	{ ec=1 ; eval "${testfailed}"; }
${kdestroy}

echo "rename user"; > messages.log
${kadmin} add -p foo --use-defaults rename@${R} || exit 1
${kinit} --password-file=${objdir}/foopassword rename@${R} || \
	{ ec=1 ; eval "${testfailed}"; }
${kadmin} rename rename@${R} rename2@${R} || exit 1
${kinit} --password-file=${objdir}/foopassword rename2@${R} || \
	{ ec=1 ; eval "${testfailed}"; }
${kdestroy}
${kadmin} delete rename2@${R} || exit 1

echo "rename user to another realm"; > messages.log
${kadmin} add -p foo --use-defaults rename@${R} || exit 1
${kinit} --password-file=${objdir}/foopassword rename@${R} || \
	{ ec=1 ; eval "${testfailed}"; }
${kadmin} rename rename@${R} rename@${R2} || exit 1
${kinit} --password-file=${objdir}/foopassword rename@${R2} || \
	{ ec=1 ; eval "${testfailed}"; }
${kdestroy}
${kadmin} delete rename@${R2} || exit 1

echo deleting all but aes enctypes on krbtgt
${kadmin} del_enctype krbtgt/${R}@${R} ${enctype_sans_aes} || exit 1

echo deleting all but des enctypes on server-des3
${kadmin} del_enctype ${server}-des3@${R} ${enctype_sans_des3} || exit 1
${kadmin} ext -k ${keytab} ${server}-des3@${R} || exit 1

echo "try all permutations (only aes)"; > messages.log
for a in $enctypes; do
	echo "Getting client initial tickets ($a)"; > messages.log
	${kinit} --enctype=$a --password-file=${objdir}/foopassword foo@${R} ||\
		{ ec=1 ; eval "${testfailed}"; }
	for b in $enctypes; do
		echo "Getting tickets ($a ->  $b)"; > messages.log
		${kgetcred} -e $b ${server}@${R} || \
			{ ec=1 ; eval "${testfailed}"; }
		${test_ap_req} ${server}@${R} ${keytab} ${cache} || \
			{ ec=1 ; eval "${testfailed}"; }

		echo "Getting tickets ($a ->  $b) (server des3 only)"; > messages.log
		${kgetcred} ${server}-des3@${R} || \
			{ ec=1 ; eval "${testfailed}"; }
		${test_ap_req} ${server}-des3@${R} ${keytab} ${cache} || \
			{ ec=1 ; eval "${testfailed}"; }

		${kdestroy} --credential=${server}@${R}
		${kdestroy} --credential=${server}-des3@${R}
	done
	${kdestroy}
done

echo deleting all enctypes on krbtgt
${kadmin} del_enctype krbtgt/${R}@${R} aes256-cts-hmac-sha1-96 || \
	{ ec=1 ; eval "${testfailed}"; }
echo "try initial ticket w/o and keys on krbtgt"
${kinit} --password-file=${objdir}/foopassword foo@${R} 2>/dev/null && \
	{ ec=1 ; eval "${testfailed}"; }
echo "adding random aes key"
${kadmin} add_enctype -r krbtgt/${R}@${R} aes256-cts-hmac-sha1-96 || \
	{ ec=1 ; eval "${testfailed}"; }
echo "try initial ticket with random aes key on krbtgt"
${kinit} --password-file=${objdir}/foopassword foo@${R} || \
	{ ec=1 ; eval "${testfailed}"; }
${kdestroy}

rsa=yes
ecdsa=yes
pkinit=no
if ${hxtool} info | grep 'rsa: hx509 null RSA' > /dev/null ; then
    rsa=no
fi
if ${hxtool} info | grep 'rand: not available' > /dev/null ; then
    rsa=no
fi
if ${kinit} --help 2>&1 | grep "CA certificates" > /dev/null; then
    pkinit=yes
fi

if ${hxtool} info | grep 'ecdsa: hcrypto null' > /dev/null ; then
    ecdsa=no
fi


# If we support pkinit and have RSA, lets try that
if test "$pkinit" = yes -a "$rsa" = yes ; then

    echo "try anonymous pkinit"; > messages.log
    ${kinit} --renewable -n @${R} || \
	{ ec=1 ; eval "${testfailed}"; }
    ${kgetcred} ${server}@${R} || { ec=1 ; eval "${testfailed}"; }
    ${kinit} --renew || { ec=1 ; eval "${testfailed}"; }
    ${kdestroy}

    for type in "" "--pk-use-enckey"; do
	echo "Trying pk-init (principal in certificate) $type"; > messages.log
	${kinit} $type -C FILE:${hx509_data}/pkinit.crt,${hx509_data}/pkinit.key bar@${R} || \
		{ ec=1 ; eval "${testfailed}"; }
	${kgetcred} ${server}@${R} || { ec=1 ; eval "${testfailed}"; }
	${kdestroy}

	echo "Trying pk-init (principal in pki-mapping) $type"; > messages.log
	${kinit} $type -C FILE:${hx509_data}/pkinit.crt,${hx509_data}/pkinit.key foo@${R} || \
		{ ec=1 ; eval "${testfailed}"; }
	${kgetcred} ${server}@${R} || { ec=1 ; eval "${testfailed}"; }
	${kdestroy}

	echo "Trying pk-init (password protected key) $type"; > messages.log
	${kinit} $type -C FILE:${hx509_data}/pkinit.crt,${hx509_data}/pkinit-pw.key --password-file=${objdir}/foopassword foo@${R} || \
		{ ec=1 ; eval "${testfailed}"; }
	${kgetcred} ${server}@${R} || \
	{ ec=1 ; eval "${testfailed}"; }
	${kdestroy}

	echo "Trying pk-init (proxy cert) $type"; > messages.log
	${kinit} $type -C FILE:${hx509_data}/pkinit-proxy-chain.crt,${hx509_data}/pkinit-proxy.key foo@${R} || \
		{ ec=1 ; eval "${testfailed}"; }
	${kgetcred} ${server}@${R} || { ec=1 ; eval "${testfailed}"; }
	${kdestroy}

    done

    if test "$ecdsa" = yes > /dev/null ; then
	echo "Trying pk-init (ec certificate)"
	> messages.log
	${kinit} -C FILE:${hx509_data}/pkinit-ec.crt,${hx509_data}/pkinit-ec.key bar@${R} || \
	    { ec=1 ; eval "${testfailed}"; }
	${kgetcred} ${server}@${R} || { ec=1 ; eval "${testfailed}"; }
	${kdestroy}
	grep 'PK-INIT using ecdh' messages.log > /dev/null || \
	    { ec=1 ; eval "${testfailed}"; }
    fi

else
	echo "no pkinit (pkinit: $pkinit, rsa: $rsa)"; > messages.log
fi

echo "test impersonate using rc4 based tgt"; > messages.log
${kinit} -e arcfour-hmac-md5 --forwardable --password-file=${objdir}/foopassword ${ps} || \
        { ec=1 ; eval "${testfailed}"; }
${kgetcred_imp} --impersonate=bar@${R} ${ps} || \
        { ec=1 ; eval "${testfailed}"; }
${test_ap_req} ${ps} ${keytab} ${ocache} || \
        { ec=1 ; eval "${testfailed}"; }

echo "tickets for impersonate test case"; > messages.log
${kinit} --forwardable --password-file=${objdir}/foopassword ${ps} || \
	{ ec=1 ; eval "${testfailed}"; }
${kgetcred_imp} --impersonate=bar@${R} ${ps} || \
	{ ec=1 ; eval "${testfailed}"; }
${test_ap_req} ${ps} ${keytab} ${ocache} || \
	{ ec=1 ; eval "${testfailed}"; }
echo "  negative check"
${kgetcred_imp} --impersonate=bar@${R} foo@${R} 2>/dev/null && \
	{ ec=1 ; eval "${testfailed}"; }

echo "test impersonate unknown client"; > messages.log
${kgetcred_imp} --forward --impersonate=unknown@${R} ${ps} && \
	{ ec=1 ; eval "${testfailed}"; }

echo "test impersonate account-expired client"; > messages.log
${kgetcred_imp} --forward --impersonate=account-expired@${R} ${ps} && \
	{ ec=1 ; eval "${testfailed}"; }

echo "test impersonate pw-expired client"; > messages.log
${kgetcred_imp} --forward --impersonate=pw-expired@${R} ${ps} || \
	{ ec=1 ; eval "${testfailed}"; }

echo "test delegate sensitive client"; > messages.log
${kgetcred_imp} --forward --impersonate=sensitive@${R} ${ps} || \
	{ ec=1 ; eval "${testfailed}"; }
${kgetcred} \
	--out-cache=${o2cache} \
	--delegation-credential-cache=${ocache} \
	${server}@${R} && \
	{ ec=1 ; eval "${testfailed}"; }

echo "test constrained delegation"; > messages.log
${kgetcred_imp} --forward --impersonate=bar@${R} ${ps} || \
	{ ec=1 ; eval "${testfailed}"; }
${kgetcred} \
	--out-cache=${o2cache} \
	--delegation-credential-cache=${ocache} \
	${server}@${R} || \
	{ ec=1 ; eval "${testfailed}"; }
echo "  try using the credential"
${test_ap_req} ${server}@${R} ${keytab} ${o2cache} || \
	{ ec=1 ; eval "${testfailed}"; }
echo "  negative check"
${kgetcred} \
	--out-cache=${o2cache} \
	--delegation-credential-cache=${ocache} \
	bar@${R} 2>/dev/null && \
	{ ec=1 ; eval "${testfailed}"; }

echo "test constrained delegation impersonation (non forward)"; > messages.log
rm -f ocache.krb5
${kimpersonate} -s ${ps} -c bar@${R} -t ${aesenctype} || \
	{ ec=1 ; eval "${testfailed}"; }
${kgetcred} --out-cache=${o2cache} --delegation-credential-cache=${ocache} ${server}@${R} > /dev/null 2>/dev/null && \
	{ ec=1 ; eval "${testfailed}"; }

echo "test constrained delegation impersonation (missing KRB5SignedPath)"; > messages.log
rm -f ocache.krb5
${kimpersonate} -s ${ps} -c bar@${R} -t ${aesenctype} -f forwardable || \
	{ ec=1 ; eval "${testfailed}"; }
${kgetcred} --out-cache=${o2cache} --delegation-credential-cache=${ocache} ${server}@${R} > /dev/null 2>/dev/null && \
	{ ec=1 ; eval "${testfailed}"; }

${kdestroy}

echo "check renewing" > messages.log
${kinit} --renewable --password-file=${objdir}/foopassword foo@$R || \
	{ ec=1 ; eval "${testfailed}"; }
echo "kinit -R"
${kinit} -R || \
	{ ec=1 ; eval "${testfailed}"; }
echo "check renewing MIT interface" > messages.log
${kinit} --renewable --password-file=${objdir}/foopassword foo@$R || \
	{ ec=1 ; eval "${testfailed}"; }
echo "test_renew"
env KRB5CCNAME=${cache} ${test_renew} || \
	{ ec=1 ; eval "${testfailed}"; }
${kdestroy}

echo "checking server aliases"; > messages.log
${kinit} --password-file=${objdir}/foopassword foo@$R || \
	{ ec=1 ; eval "${testfailed}"; }
echo "Getting tickets"; > messages.log
${kgetcred} ${alias1}@${R} || { ec=1 ; eval "${testfailed}"; }
${kgetcred} ${alias2}@${R} || { ec=1 ; eval "${testfailed}"; }
echo "   verify entry in keytab"
${test_ap_req} ${alias1}@${R} ${keytab} ${cache} || \
	{ ec=1 ; eval "${testfailed}"; }
echo "   verify entry in keytab with any"
${test_ap_req} --server-any ${alias1}@${R} ${keytab} ${cache} || \
	{ ec=1 ; eval "${testfailed}"; }
echo "   verify failure with alias entry"
${test_ap_req} ${alias2}@${R} ${keytab} ${cache} 2>/dev/null && \
	{ ec=1 ; eval "${testfailed}"; }
echo "   verify alias entry in keytab with any"
${test_ap_req} --server-any ${alias2}@${R} ${keytab} ${cache} || \
	{ ec=1 ; eval "${testfailed}"; }
${kdestroy}

echo "testing removal of keytab"
${ktutil} -k ${keytab} destroy || { ec=1 ; eval "${testfailed}"; }
test -f ${keytabfile} && { ec=1 ; eval "${testfailed}"; }

echo "Checking client pw expire"; > messages.log
${kinit} --password-file=${objdir}/foopassword \
        pw-expire@${R} 2>kinit-log.tmp|| \
	{ ec=1 ; eval "${testfailed}"; }
grep 'Your password will expire' kinit-log.tmp > /dev/null || \
	{ ec=1 ; eval "${testfailed}"; }
echo "   kinit passes"
${test_gic} --client=pw-expire@${R} --password=foo > kinit-log.tmp 2>/dev/null
${EGREP} "^e type: 6" kinit-log.tmp > /dev/null  || \
	{ ec=1 ; eval "${testfailed}"; }
echo "   test_gic passes"
${kdestroy}

echo "Checking password expiration" ; > messages.log

kinitpty=${objdir}/foopassword.rkpty
cat > ${kinitpty} <<EOF
expect Password
password foo\n
expect Password has expired
expect New password
password Foobar11\n
expect password
password Foobar11\n
expect Success: Password changed
EOF

echo "Checking client pw expire"; > messages.log
${rkpty} ${kinitpty} ${kinit} pw-expired@${R}|| \
	{ ec=1 ; eval "${testfailed}"; }

${kdestroy}


echo "killing kdc (${kdcpid}) kpasswdd (${kpasswddpid})"
sh ${leaks_kill} kdc $kdcpid || exit 1
sh ${leaks_kill} kpasswdd $kpasswddpid || exit 1

trap "" EXIT

exit $ec